002 SUZUKI SWIFT 2017 5.G Owners Manual

&2672)0$7(5,$/6$1'&21680$%/(672%(%251(%<&86720(5

6[TGU
#KTRTGUUWTG#DPQTOCNYGCT&COCIG

9JGGNU
+PURGEV
3OHDVHVHHRYHUOHDIIRUVSHFLDOLQVWUXFWLRQV

#NN.CVEJGU*KPIGU.QEMU%GPVTCN
.QEMKPI
1RGTCVKQP
$CVVGT[GNGEVTQN[VG
.GXGN.GCMCIG

.KIJVKPI5[UVGO*QTP
1RGTCVKQP

9KRGT
1RGTCVKQP
1RGTCVKQPQH$TCMGUENWVEJ)GCT
UJKHVKPICPF5RGGFQOGVGT

$QF[%JCUUKUPQKUG
<002c003100240002002f00230034002d001c00020002000201680002001c0002000200020025004a00470045004d0047004600020031002d000e00020023001c000200230046004c005700550056000e0002000200020025001c00020025004e0047004300
50000e0002000200020034001c0002003400470052004e0043>EGQT%JCPIG..WDTKECVG66KIJVGP
<000200020031001c0002003400510056004300560047000e000200020002002b001c0002002b0050005500520047004500560002004300500046000200450051005400540047004500560002005100540002005400470052004e0043004500470002004b00
48000200500047004500470055005500430054005b00020002>
&86720(5

'($/(5¶6&23<.0RU0217+6
5VGGTKPIYJGGN
2NC[
#NN4QFU#TOU
.QQUG&COCIG9GCT
2QYGT5VGGTKPI5[UVGO
1RGTCVKQP
5VGGTKPIIGCTDQZ
+PURGEV
6KNVUVGGTKPI
1RGTCVKQP
KHGSWKRRGF$CVVGT[GNGEVTQN[VG
.GXGN.GCMCIG
.KIJVKPI5[UVGO*QTP
1RGTCVKQP
9KTKPI*CTPGUU%QPPGEVKQPU
.QQUGPGUU
9KRGT
1RGTCVKQP1RGTCVKQPQH$TCMGUENWVEJ)GCT
UJKHVKPICPF5RGGFQOGVGT
$QF[%JCUUKUPQKUG
6[TGU
#KTRTGUUWTG#DPQTOCNYGCT4QVCVKQP
9JGGNU
+PURGEV
(TQPV4GCTYJGGN$GCTKPI
.QQUG&COCIG
<0013001000020035005700550052004700500055004b00510050000200350056005400570056005500110035004a00510045004d00020023004400550051005400440047005400550002000a0031004b004e0002004e00470043004d004300490047000b00
020002>
5WURGPUKQPCTOU-PWEMNG4GCTURTKPI

&COCIG.QQUG
#NNPWVU$QNVU
6KIJVGP
3OHDVHVHHRYHUOHDIIRUVSHFLDOLQVWUXFWLRQV
&86720(5

2-8
BEFORE DRIVING
74LH0-74E
When the remote controller is within the
operating range described in this section,
you can lock or unlock the doors by pushing
the request switch (1) on the driver’s door
handle, front passenger’s door handle or
tailgate.
To lock all doors when all doors are
unlocked:
• push one of the request switches once.
The turn signal lights will flash once and
the exterior siren will sound once when the
doors are locked.
To unlock doors:
• Push one of the request switches to
unlock all door.When the doors are unlocked:
• The turn signal lights will flash twice and
the exterior siren will sound twice.
• If the interior light switch is in the
“DOOR” position, the interior light will
turn on for about 15 seconds and then
fade out. If you press the engine switch
during this time, the light will start to fade
out immediately.
Be sure the doors are locked after you
operate the request switch to lock the
doors.
NOTE:
• The door locks cannot be operated by
the request switch under the following
conditions:
– If any door is open or is not completely
closed.
– If the ignition mode is other than
“LOCK” (OFF).
• If no doors are opened within about 30
seconds after unlocking the doors by
pushing the request switch, the doors
will be locked again automatically.Swift
79MH0208
Swift Dzire
74LHT2002
(1) 80 cm (2 1/2 feet)
When the remote controller is within
approximately 80 cm (2 1/2 feet) from a
front door handle, you can lock or unlock
the doors by pushing the request switch.
(1)
(1)
(1)
EXAMPLE
(1)
(1)
EXAMPLE
Door Locks: 3, 5, 8
Windows: 3, 8

2-53
BEFORE DRIVING
74LH0-74E
Information Display
74LM02001
(1) Trip meter selector knob
(2) Indicator selector knob
(3) Information display
When the ignition switch is in the “ON”
position or the ignition mode is "ON", the
information display shows the following
information.
Display (A)
Thermometer
Display (B) (For automatic transmis-
sion) / (For automated manual
transaxle)
Transmission selector Position Indicator
Display (C)
Trip meter / Instantaneous fuel consump-
tion / Average fuel consumption / Driving
range.Display (D)
Odometer
Display (E)
Clock
Thermometer (if equipped)When the ignition switch is in the “ON”
position or the ignition mode is "ON", the
display (A) shows the thermometer.
The thermometer indicates the outside
temperature.
68LM258
If the outside temperature nears freezing,
the mark (a) will appear on the display.
NOTE:
• The outside temperature indication is not
the actual outside temperature when
driving at low speed, or when stopped.
• If there is something wrong with the ther-
mometer, or just after the ignition switch
is turned to the “ON” position or the
engine switch is pressed to change the
ignition mode is “ON”, the display may
not indicate the outside temperature.
When the display (B) shows the driving
range, you can change the unit of tempera-
ture.To change the unit of temperature, while
pushing and holding the trip meter selector
knob (1), turn the indicator selector knob
(2).
68LM259
NOTE:
When you reconnect the negative (–) ter-
minal to the battery, the unit of temperature
will be reinitialized. Change the unit again
to your preference.
Transmission selector position indica-
tor (for automatic transmission vehi-
cles)
74LM02002
When the ignition switch is in the “ON”
position or the ignition mode is “ON” the
(1) (2)(3)
(D)(B) (A)
(C)(E)
EXAMPLE
(a)EXAMPLE
EXAMPLE
(Initial
setting)
(b)EXAMPLE

3-7OPERATING YOUR VEHICLE
74LH0-74E
“Remote Controller Outside” Warn-
ingWhen the conditions described below are
met, the system gives a “remote controller
outside” warning by sounding the interior
and exterior buzzers and blinking the
immobilizer/keyless push start system
warning light.
Any door is opened and then closed
while the remote controller is not inside
the vehicle and the engine is running or
the ignition mode has been changed to
“ACC” or “ON” by pressing the engine
switch.
The remote controller is not inside the
vehicle when you attempt to start the
engine after changing the ignition mode
to “ACC” or “ON” by pressing the engine
switch.
79MH0315
(1) Immobilizer/keyless push start sys-
tem warning light (blinks)NOTE:
If the warning is given, locate the remote
controller as soon as possible.
Any attempt to start the engine will fail
while the warning is active. Blinking of
the immobilizer/keyless push start sys-
tem warning light in the instrument clus-
ter will indicate this condition. Refer to
“Warning and Indicator Lights” in the
“BEFORE DRIVING” section for details.
Blinking of the immobilizer/keyless push
start system warning light should stop
shortly after the remote controller is
brought back inside the vehicle. If they
do not stop blinking, change the ignition
mode to “LOCK” (OFF) by pressing the
engine switch and then perform the
engine starting operation.
Always keep the remote controller with
you as the driver.
Interior Workable Area for Engine
Starting, Ignition Mode Selection and
“Remote Controller Outside” WarningSwift
74LHT3002
Swift Dzire
74LHT3001
(1) Interior workable areaThe “interior workable area” for these functions
is defined as all the interior spaces except for
the space above the instrument panel.NOTE:
Even when the remote controller is in the
“interior workable area”, if it is in any of
the following conditions, you may not be
able to start the engine or select the igni-
tion modes, and the “remote controller
outside” warning may be given.
–The remote controller’s battery is low.
–The remote controller is affected by
strong radio signals or noise.
–The remote controller is in contact with
or covered by a metallic object.
–The remote controller is in stowage like
the glove box or a door pocket.
–The remote controller is in the sun visor
pocket or on the floor. Even when the remote controller is outside
the “interior workable area”, if it is in any of
the following conditions, you may be able
(1)
(1)
EXAMPLE
EXAMPLE
Braking: 6

3-18
OPERATING YOUR VEHICLE
74LH0-74E
knob button (2) and shift the gearshift
lever to the desired position.
This procedure is for emergency use only.
If repeated use of this procedure is neces-
sary, or the procedure does not work as
described, take the vehicle to your dealer
for repair.
Auto Gear ShiftAuto Gear Shift is a 5-speed forward/
reverse transaxle.
Auto Gear Shift has the basic features of
conventional manual transaxle, but clutch
operation and transaxle gear shifting are
controlled electronically.
NOTE:
When you open the driver’s door, the Auto
Gear Shift systems run automatically and
you may hear an operating noise. This
sound does not indicate a malfunction.
The features are as follows:
67LM3002
67MH3003
Depress brake pedal indicator
76MH0A047
This light will come on if you do not
depress the brake pedal in the following
situations. When starting the engine.
When the engine is on and the gearshift
lever is shifted from “N” position to “D”,
“M” or “R” position.
When the ignition switch is in the “ON”
position and the engine is off, the gear-
shift lever is shifted into any position.
This light will also come on if one of the
gears cannot be engaged and the system
is unable to re-try shifting when you shift
the gearshift lever from “N” position to “D”,
“M” or “R” position.
Starting the engine
When starting the engine, always place the
gearshift lever in the “N” position and
depress the brake pedal firmly. The engine
cannot be started unless the gearshift
lever is in the “N” position and the brake
pedal is depressed.
76MH0A056
Clutch operation
You can select either the Drive (D) mode or
the Manual (M) mode. Since this vehicle
controls clutch operation electronically in
either mode, you do not need to operate
the clutch.
Creeping function
This vehicle has a creeping function that
helps the vehicle to start smoothly by
NOTICE
Do not depress both the brake pedal
and accelerator pedal simultane-
ously. This can cause damage or
overheating to the clutch.
-M+R
N
D-
-M+R
N
D-
-M+R
N
D-

10-1GENERAL INFORMATION
74LH0-74E
GENERAL INFORMATIONVehicle IdentificationChassis Serial Number
74LHT1001
74LHT1002
The chassis and/or engine serial numbers
are used to register the vehicle. They are
also used to assist your dealer when order-
ing or referring to special service informa-
tion. Whenever you have occasion to
consult your MARUTI SUZUKI dealer,
remember to identify your vehicle with this
number. Should you find the number diffi-
cult to read, you will also find it on the iden-
tification plate.Engine Serial Number
60G128
The engine serial number is stamped on
the cylinder block as shown in the illustra-
tion.
EXAMPLEEXAMPLE
Vehicle Identification: 2, 5

10-2
GENERAL INFORMATION
74LH0-74E
Radio frequency identification
(RFID) tag As per Ministry of Road Transport and
Highways, the Radio frequency identifica-
tion (RFID) tag (1) is mandatory for each
vehicle for the purpose of electronic toll
collection or any other purpose as may be
defined by the Government of India.
In case of any damage to RFID tag or
replacement of front windscreen, please
contact your nearest MARUTI SUZUKI
Authorized workshop.
74LHM1001
As seen from inside of the vehicle
74LHM1002
NOTE:
The picture shown is for indicative purpose
only. Internal structure of actual device
mounted on vehicle may be different.
As seen from outside of the vehicle
74LHM1003
NOTE:
The picture shown is for indicative purpose
only. Internal structure of actual device
mounted on vehicle may be different.
NOTE:
RFID tag needs to be registered by gov-
ernment authorized agency (if applica-
ble).
Any attempt to remove the tag from the
windscreen will result in permanent dam-
age to the tag.
Use of chemical cleaners to clean the
windscreen area where the tag is
mounted can damage the tag.
Use of any sharp objects on the tag can
damage the tag.
(1)
EXAMPLE
EXAMPLE
EXAMPLE

2
REGIONAL OFFICES AREA COVERED
REGIONAL OFFICE (EAST-I)
MARUTI
SUZUKI
INDIA LIMITED
L & T CHAMBERS, 4TH FLOOR, 16 CAMAC STREET, KOLKATA - 700 017
PH : (033) 22835252-54WEST BENGAL, SIKKIM, ANDAMAN & NICOBAR
REGIONAL OFFICE (EAST-II)
MARUTI
SUZUKI
INDIA LIMITED
401, 4TH FLOOR, ROHINI APARTMENT, OPPOSITE HOTEL APSARA, 56 CIRCULAR ROAD, NEAR LALPUR
CHOWK, RANCHI, JHARKHAND-834001, PH : (0651) 2563931BIHAR, JHARKHAND
REGIONAL OFFICE (EAST-III)
MARUTI
SUZUKI
INDIA LIMITED
5A, 5TH FLOOR, ABOVE CITY MART SHOPPING MALL, 724, PEACE ENCLAVE, ULUBARI,
GUWAHATI – 781 007, ASSAM PH.: (0361) 2734308/ 10/ 11/ 12ARUNACHAL PRADESH, ASSAM, MANIPUR, MEGHALYA, MIZORAM,
NAGALAND, TRIPURA
REGIONAL OFFICE (7
-/‡6)
MARUTI
SUZUKI
INDIA LIMITED
3RD FLOOR, COMMERCE HOUSE, 7 RACE COURSE ROAD, INDORE-452001
PH : (0731) 4069481, 4069382 FAX : 4069382MADHYA PRADESH ,
"
Ê"

Ê­

-/‡6®Ê

,1/Ê-1<1Ê 
Ê/

<00220076007600880056006900ca0020009c00b000ca00c800e40078005d00ca00c800e400c8005d00ca00c800cc008500ca0013008f009c009c00c0005d00ca003100cc008e003e008f00ca002d0088007d0098003e00cc00d500c00069005d00ca002a00
3e0085003e008f005d00ca0020001500870078005d00ca0009>…ÕL>˜iÃ…Ü>ÀʇÊÇxÓ£ä£Ê
­"`ˆÃ…>®]Ê*…\ÊäÈÇ{‡ÈÇx£xn£ÊODISHA, CHHATISGARH
REGIONAL OFFICE (WEST-I)
MARUTI
SUZUKI
INDIA LIMITED
602, MADHAVA BLDG., BANDRA KURLA COMPLEX, BANDRA (E), MUMBAI - 400 051
PH : (022) 2659 0165/0286/0290/0291 FAX : 26590285MUMBAI, NAVI MUMBAI, THANE, RAIGAD, RATNAGIRI, SINDHUDURG & GOA
REGIONAL OFFICE (WEST-II)
MARUTI
SUZUKI
INDIA LIMITED
7TH FLOOR, NORTH BLOCK, SACRED WORLD WANOWARIE, PUNE-411040
PH : (020) 64002641 / 2 / 3 /0 4REST OF MAHARASHTRA
REGIONAL OFFICE (WEST-III)
MARUTI
SUZUKI
INDIA LIMITED
211, ISKON MALL, ABOVE STAR INDIA BAZAAR, SATELLITE ROAD, AHMEDABAD-380015
PH : (079) 40036660/40036671GUJARAT , DADRA & NAGAR HAVELI, DAMAN AND DIU
REGIONAL OFFICE (SOUTH-I)
MARUTI
SUZUKI
INDIA LIMITED
7TH FLOOR, CAPITAL TOWERS, 180, KODAMBAKKAM HIGH ROAD, NUNGAMBAKKAM, CHENNAI - 600 034
PH: (044) 28233050-53 FAX: (044) 28242059TAMILNADU, PONDICHERRY
REGIONAL OFFICE (SOUTH-II)
MARUTI
SUZUKI
INDIA LIMITED
204, 2ND FLOOR, “EMBASSY CLASSIC”, VITTAL MALLYA ROAD, BENGALURU-560001
PH. : (080) 22127384-85, 5112017-18 FAX : (080) 22484841KARNATAKA
REGIONAL OFFICE (SOUTH-III)
MARUTI
SUZUKI
INDIA LIMITED
2ND FLOOR, TUTUS TOWER, NH-47 BYPASS, PADIVATTOM, COCHIN-682024
PH. : (0484) 4088400KERALA, LAKSHADWEEP
REGIONAL OFFICE (SOUTH-IV)
MARUTI
SUZUKI
INDIA LIMITED
MAHAVIR CHAMBERS, DOOR NO. 3-6-363 & 3-6-1/1, CHAMBER NO. 101 & 102, 1ST FLOOR,
LIBERY SQUARE, HIMYATNAGAR, HYDERABAD PH : (040) 66729999ANDHRA PRADESH]Ê/