TOYOTA 4RUNNER 2011 N280 / 5.G Navigation Manual

10
SET HOME
Touch .
Make sure you are in the desired Search Area. Touch
.
Input the city name and touch .
step2
step3
step5step6
Press the SETUP panel button
followed by .step1
Touch . Touch . step4 Tip - For security reasons, use a point close to your home instead of your actual home address.

11
SET HOME
Input the street name and touch .
Touch followed
by to change the home icon.
Touch the desired icon for
your home. Touch at the bottom right of the Edit Home screen.
step8
step9
step11step12
Touch the desired city name. step7
Touch the desired street name. Input the house number and touch . step10
Quick Tip - Enter the street name without prefi xes such as North or the letter N. The system will display the base street name without prefi xes or suffi xes on the next screen.

12
CONNECT A BLUETOOTH PHONE
Touch . Verify that Bluetooth feature on the phone is ON and is in discoverable mode.
step2
step3
Press the INFOPHONE panel
button followed by .
step1
Input the passkey listed on the screen into the approved Bluetooth cell phone. Please refer to the cell phone manufacturer’s user guide for pairing procedures.
Upon connection, the system will indicate that the pairing process was successful.
step4
Quick Tip - Verify the Bluetooth cell phone has been approved by visiting www.Toyota.Letstalk.com.
Quick Tip - Up to 4 Bluetooth cell phones can be paired. However, only one Bluetooth cell phone can be used at a time.
If you have diffi culty pairing your phone, or are unable to transfer your cell phone book, please
refer to the cell phone manufacturer's user guide, or go to www.Toyota.Letstalk.com for more
information about phone connections and compatibility. If you are able to successfully transfer
your phone book, you can dial by name using voice recognition. Please say the name exactly
as it is entered in your phone when in the telephone screen.

13
CALLING BY VOICE RECOGNITION
After the beep say, “Dial by Number.”
Call is active when is indicated. To end call, press
on the screen or on the steering wheel.
step2
step3
step5
Press on the steering wheel. After the beep say, “Phone.”step1
After the beep say the phone number digits individually, without pausing (e.g. “Three, one, zero, four…”).
After the beep, say “Dial” or
press on the steering wheel.
step4
Quick Tip - A noisy environment may prevent the voice recognition system from understanding your commands. It is recommended that you reduce background noise (including passenger conversation and wind noise) prior to using the Voice Recognition system.
Quick Tip - If you know your next command,
you can press at any time to interrupt the prompt. Speak your command after the beep.
Some Bluetooth® equipped cell phones may or may not show battery or signal strength on the display.
DIAL BY NUMBER

14
CALLING BY VOICE RECOGNITION
DIAL BY NAME
Press on the steering wheel. After the beep say, “Phone.”step1
Quick Tip - If you know your next command,
you can press at any time to interrupt the prompt. Speak your command after the beep.
After the beep say, “Dial by Name.”step2
step3
After the beep say the name from the contact list.After the beep, say “Dial” or
press on the steering wheel.
step4
Call is active when is indicated. To end call, press
on the screen or on the steering wheel.
step5
If you have diffi culty pairing your phone, or are unable to transfer your cell phone book, please
refer to the cell phone manufacturer's user guide, or go to www.Toyota.Letstalk.com for more
information about phone connections and compatibility. If you are able to successfully transfer
your phone book, you can dial by name using voice recognition. Please say the name exactly
as it is entered in your phone when in the telephone screen.
Quick Tip - If you know your next command,
you can press at any time to interrupt the prompt. Speak your command after the beep.

15
ADDITIONAL NAVIGATION FEATURES
Once the address has been inputted, select the desired route preference(s) for the trip. When the yellow bar appears, the preference has been selected. For example, if Toll Roads is not selected, the system will route over non-toll roads which may take longer to reach the destination.
ROUTE PREFERENCES
Touch to select from seven different screen viewing options. Four screen preferences are available when the map is visible and three additional are available during route guidance only.
3 ROUTES
SCREEN PREFERENCES
One of three routes may be chosen for the trip. Quick offers the shortest route by time; Alt is the second fastest route; Short is the most direct based upon driven mileage. The system does not account for traffi c signals or traffi c fl ow.
Single Map
SEARCH AREA
Singgle Map
* Selections available when in guidance mode only.
Dual Map
Compass
Freeway Information
* Turn List
* Arrow
* Intersection Guidance
Prior to inputting the desired address select the Search Area by pressing . If the incorrect Search Area is chosen, the system will either fi nd an address that closely matches in that area or will indicate that the address cannot be found.
Select the desired Search Area and touch .

16
CLOCK SETTINGS
ADDITIONAL NAVIGATION FEATURES
LANGUAGE
PRESS SETUP PANEL BUTTON >
Select Language Preference: English, French or Spanish.
PRESS SETUP PANEL BUTTON >
Adjust the Voice Guidance volume level.
BEEP SETTING VOICE VOLUME
AUTO SCREEN CHANGE
PRESS SETUP PANEL BUTTON >
Once the screen transition is switched off, the audio screen will remain without reverting to the map display.
PRESS SETUP PANEL BUTTON >
Adjust the Beep sound On or Off.
PRESS SETUP PANEL BUTTON >
Disables system guidance for voice commands. Only on-screen guidance will be available when switched off.
VOICE RECOGNITION GUIDANCE
PRESS SETUP PANEL BUTTON >
Adjust the Time Zone, Daylight Saving Time or manually adjust the clock.

17
ESTIMATED DISTANCE AND TIME†
† The system does not account for traffi c signals or traffi c fl ow.
ADDITIONAL NAVIGATION FEATURES
OPERATION OF VEHICLE EMERGENCY SCREEN
Touch the desired emergency category. If the vehicle is in motion, only nearby police stations, dealers, hospitals or fi re stations are shown.
Press the DEST panel button followed by and
then to access four emergency destinations:
• Police Stn. • Hospital • Dealer • Fire Stn.
Touch the desired destination.
The system can be customized to match your driving habits. Adjust the speed settings for Residential, Main Streets and Freeways to match your normal driving speed. Adjusting these settings will affect the estimated time of arrival (ETA).
Please refer to the Navigation Owner's manual for a complete description of this feature.
PRESS SETUP PANEL BUTTON >
> >

18
Route guidance with fl ow information and traffi c events.
Accidents and disabled vehicles.
Traffi c events - road construction.
XM NavTraffi c® integrates with your navigation system to display traffi c information.
Traffi c events and fl ow data are updated every 2 minutes from a variety of sources.
XM NavTraffi c® service is available in 100 major metropolitan areas across the US
and Canada with more to come.
New 4RUNNER owners with factory-installed navigation receive a
90-day complimentary trial subscription from XM.
Traffi c information provided by XM NavTraffi c®:
http://www.xmradio.com/navtraffi c/index.xmc
XM NAVTRAFFIC®

19
Press the MAPVOICE panel
button followed by .
step1step2
XM NAVTRAFFIC® PREFERENCES
Touch . When the yellow bar appears, the preference has been selected. Touch , traffi c fl ow is displayed by colored lines alongside freeway or highways:
SHOW XM NAVTRAFFIC® INFORMATION
Free fl ow traffi c Moderate traffi c Heavy congestion
Press the SETUP panel button
followed by . step1step2Touch .
AUTO AVOID TRAFFIC
step3
Select from the Auto Avoid Traffi c option. Touch followed by . The system will automatically select another route when moderate or heavy traffi c is detected during route guidance.
XM NAVTRAFFIC®