oil type TOYOTA AVENSIS 2003 Service Repair Manual

NEW MODEL OUTLINEMO-28
EQUIPMENT LIST

: Standard OP: Option
EuropeGeneral
ENTRYMID
TECHNICALMID
ELEGANTGeneral
Countries
Exterior
Rear SpoilerWagon


Ð
Side Protection MouldingOPOPOPOP
WindshieldGreen


Ð
Front SideGreen




GlassRear Side & BackGreen



GlassRear Side & BackWagonPrivacyOPOPOPÐ
Rear QuarterWagonGreen


ÐRear QuarterWagonPrivacyOPOPOPÐ
Chassis
195/65 R153ZZ-FE & 1ZZ-FE & 1AZ-FE




205/55 R161AZ-FSE & 1CD-FTV


Ð
Tire205/55 R163ZZ-FE & 1ZZ-FE & 1AZ-FEOPOPOPOP
215/45 R171AZ-FEÐOPOPÐ215/45 R171AZ-FSEÐOPOPÐ
15 x 6J Steel3ZZ-FE & 1ZZ-FE & 1AZ-FE




16x61/2J Steel1AZ-FSE & 1CD-FTV


Ð16 x 6 1/2 J Steel3ZZ-FE & 1ZZ-FE & 1AZ-FEOPOPOPOP
Disc Wheel16 x 6 1 / 2 JJ AluminumOPOPOPOP
16 x 6 1 / 2 JJ Light Weight AluminumOPOPOPOP
17 x 7JJ Aluminum1AZ-FEÐOPOPÐ17 x 7JJ Aluminum1AZ-FSEÐOPOPÐ
ABS (Anti-lock Brake System) with EBD (Electronic Brake force Distrib\
ution)




VSC (Vehicle Stability Control) & Brake1AZ-FSEÐ

(y)Assist & TRC (Traction Control)1CD-FTVOPOPOPÐ
Wheel4-Spoke Urethane
ÐÐ
Wheel4-Spoke LeatherÐ

Ð
SteeringColumnManual Tilt & Telescopic



SteeringEPS*13ZZ-FE & 1ZZ-FE


Ð
Hydraulic Type Power
Steering1AZ-FSE & 1CD-FTV & 1AZ-FE




Body
CoverFabric



CoverLeather1AZ-FSE & 1CD-FTVÐOPOPÐ
FrontManual




SeatFrontPower1AZ-FSE & 1CD-FTVÐOPOPÐ
FixSedan
ÐÐÐ
Rear60:40 FoldingSedanÐ



60:40 Double FoldingLiftback & Wagon


Ð
SeatBelt
Front3-Point ELR*2 Electrical Sensing Type Pretensioner
& Force Limiter




BeltRear3-Point ELR*2 & ALR*3




CRS (Child Restraint System) Anchor System (Rear Outside Seat Only)




*1: Electoronic Power Steering
*2: Emergency Locking Retractor
*3: Automatic Locking Retractor
http://vnx.su

Illustration:what to do and where
Component part No.
Detailed text: how to perform task
Task heading: what to do
Set part No
D31009
01±2
±
INTRODUCTION HOW TO USE THIS MANUAL
AVENSIS REPAIR MANUAL (RM1018E)
(c) Tightening torque, grease application area, and non±reusable parts are described as important points in the procedures.
NOTICE:
There are cases where such information can only be explained by using an illu\
stration. In these
cases, all the information such as torque, oil, etc. are described in the illu\
stration.
(d) Installing procedures are performed in the reverse order of the removal and only the important points are described.
(e) Only items with points are described in the procedure, and the operational portion \
and content are placed using an illustration. In the explanations, details of the operational \
method, standard value and
notices are placed.
(f) There may be a case where the illustrations of similar models are used. In th\
at case, specific details may be different from the actual vehicle.
(g) The procedures are presented in a step±by±step format: (1) The illustration shows what to do and where to do it.
(2) The task heading tells what to do.
(3) The explanation text tells how to perform the task and gives other information such as specifica-tions and warnings.
Example:
HINT:
This format provides an experienced technician with a FAST TRACK to the necessary information. The task
heading can be read at a glance when necessary and the text below provides deta\
iled information. Important
specifications and warnings always are written in bold type to stand out from the rest\
of the text.
5. SERVICE SPECIFICATIONS
(a) Specifications are presented in bold type throughout the manual. You never have to leave the proce- dure to look up your specifications. The specifications are also found in th\
e Service Specifications sec-
tion for quick reference.
6. TERMS DEFINITION
CAUTIONIndicates the possibility of injury to you or other people.
NOTICEIndicates the possibility of damage to the components being repaired.
HINTProvides additional information to help you to perform the repair efficiently.
http://vnx.su

±
SERVICE SPECIFICATIONSENGINE MECHANICAL
03±17
AVENSIS REPAIR MANUAL (RM1018E) Part Tightenedft
lbf
kgf
cm
N
m
Engine mounting bracket x No, 2 RH x Transverse engine
engine mounting insulatorA
B
52
113530
1,15238
83
Clutch release cylinder x manual transaxleBolt A
Bolt B
Bolt C12
9.0
5.0122 92
5189
80 in.
lbf
44 in.
lbf
Vane pump assy x Timing chain cover4343931
Front suspension arm sub±assy lower No. 1 x Lower ball joint1271,29694
Front stabilizer link assy x Front suspension7475555
Floor panel brace front x Floor3030622
Engine service cover bracket RH x Body w/o Air conditioning
RHD (w/ Air conditioning) steering position type
9.0
9.092
9280 in.
lbf
80 in.
lbf
Cooler bracket x BodyLHD (w/ Air conditioning) steering position type9.09280 in.
lbf
Oil reservoir bracket No. 1 x Body8.08271 in.
lbf
Return tube sub±assy x Frame8.08271 in.
lbf
Radiator reserve tank x sub±assy x body5.05144 in.
lbf
Compressor and magnetic clutch x Cylinder blockw/ Air conditioning2525518
Radiator relay block x Frame5.05144 in.
lbf
Engine cover No. 1 x Cylinder head cover7.07162 in.
lbf
Air cleaner assy x Body5.05144 in.
lbf
Cylinder head x Cylinder block1st
2nd79
Turn 90
806
Turn 90
58
Turn 90

Camshaft timing control valve assy x Cylinder head9.09280 in.
lbf
Camshaft timing gear assy x Camshaft5455140
Camshaft timing sprocket x Camshaft5455140
Camshaft bearing cap No. 1 x Cylinder head3030122
Camshaft bearing cap No. 2 x Cylinder head3030122
Camshaft bearing cap No. 3 x Cylinder head9.09280 in.
lbf
Chain tensioner assy No. 1 x Timing chain cover9.09280 in.
lbf
Chain tensioner plate x Stiffening crankcase assy121229
Oil pump drive sprocket x Oil pump3030122
Chain vibration damper No. 1 x Cylinder head9.09280 in.
lbf
Chain vibration damper No. 1 x Cylinder block9.09280 in.
lbf
Timing chain guide x Cylinder block9.09280 in.
lbf
Chain tensioner slipper x Cylinder block1919414
Timing chain cover (See page 14±139)Bolt A Bolt B
Bolt C Nut9.021
43
9.092
214
438 9280 in.
lbf
15
32
80 in.
lbf
Oil pan x Stiffening crankcase assy9.09280 in.
lbf
Oil pan drain plug x Oil pan2525518
Crankshaft pulley x Crankshaft1701,733125
Cylinder head cover x Cylinder head Bolt A
Bolt B
Bolt C11
14
2111 2
143
2148.0 10
15
1AZ±FSE:
Part TightenedN
mkgf
cmft
lbf
Front wheel RH1031,05076
Drain plug (M/T)4950036
Engine hanger No.1 x Cylinder head3838728
Engine hanger No.2 x Cylinder head3838728
Engine coolant temperature sensor x Cylinder head2020815
http://vnx.su

03±18
±
SERVICE SPECIFICATIONS ENGINE MECHANICAL
AVENSIS REPAIR MANUAL (RM1018E) Part Tightened
ft
lbf
kgf
cm
N
m
Knock sensor x Cylinder block2020815
Engine oil pressure switch assy x Cylinder head1515311
Water by±pass pipe No.1 x Cylinder block9.09280 in.
lbf
Drive shaft bearing bracket x Cylinder block5455140
Oil level gauge guide x Cylinder block9.09280 in.
lbf
V±ribbed belt tensioner assy x Timing chain cover6060744
Ignition coil assy x Cylinder head9.09280 in.
lbf
Water inlet x Cylinder block9.09280 in.
lbf
Exhaust manifold converter x Cylinder head3737827
Exhaust manifold stay x Exhaust manifold converter4444932
Manifold converter insulator No. 1 x Exhaust manifold converter121229
Surge tank stay No. 1 x Intake manifold2121015
Intake manifold x Cylinder head3030622
Throttle Body bracket x Throttle body2121015
Fly wheel (M/T) x Crank shaft1301,32796
Drive plate & ring gear (A/T) x Crankshaft981,00072
Transverse engine engine mounting bracket front x Transverse engine en-
gine mounting insulator front8788764
Transverse engine engine mounting bracket rear x Transverse engine engine
mounting insulator rear8788764
Front suspension cross member sub±assy front x Body Front
Rear45
133459
1,35633
98
Front suspension brace RH x Frame Bolt A
Bolt B133 801,356 81698
59
Front suspension brace LH x Frame Bolt A
Bolt B133
801,356 81698
59
Transverse engine engine mounting insulator LH x Engine mounting bracket
LH8788764
Transverse engine engine mounting insulator RH x Engine mounting bracket
RH5253038
Engine mounting bracket x No, 2 RH x Transverse engine
engine mounting insulator A B
52
11 3530
1,15238
83
Clutch release cylinder x manual transaxle Bolt A
Bolt B
Bolt C12
9.0
5.0122 92
5189
80 in.
lbf
44 in.
lbf
Vane pump assy x Timing chain cover4343931
Front suspension arm sub±assy lower No. 1 x Lower ball joint1271,29694
Front stabilizer link assy x Front suspension7475555
Floor panel brace front x Floor3030622
Engine service cover bracket RH x Body RHD steering position type9.09280 in.
lbf
Cooler bracket x Body LHD steering position type9.09280 in.
lbf
Oil reservoir bracket No. 1 x Body8.08271 in.
lbf
Return tube sub±assy x Frame8.08271 in.
lbf
Radiator reserve tank x sub±assy x body5.05144 in.
lbf
Compressor and magnetic clutch x Cylinder block2525518
Radiator relay block x Frame5.05144 in.
lbf
Engine cover No. 1 x Cylinder head cover7.07162 in.
lbf
Air cleaner assy x Body5.05144 in.
lbf
Cylinder head x Cylinder block 1st
2nd79
Turn 90
806
Turn 90
58
Turn 90

Camshaft timing control valve assy x Cylinder head9.09280 in.
lbf
Camshaft timing gear assy x Camshaft5455140
http://vnx.su

031H6±01
03±28
±
SERVICE SPECIFICATIONS LUBRICATION
AVENSIS REPAIR MANUAL (RM1018E)
TORQUE SPECIFICATION
1ZZ±FE/3ZZ±FE:
Part TightenedN
mkgf
cmft
lbf
Oil pressure switch x Cylinder head1515311
Oil pan drain plug x Oil pan3737727
Oil pump x Cylinder block9.09280 in.
lbf
1AZ±FE:
Part TightenedN
mkgf
cmft
lbf
Oil pressure switch x Cylinder head1515311
Oil pan drain plug x Oil pan2525018
Oil pump x Cylinder block1919515
Timing chain guide x Cylinder block9.09280 in.
lbf
Chain vibration damper No.1 x Cylinder block9.09280 in.
lbf
Oil pan sub±assy x Cylinder block9.09280 in.
lbf
Transverse engine engine mounting insulator x Cylinder block5253038
Engine service cover bracket RH x Body w/o Air conditioning
RHD (w/ Air conditioning) steering position type9.0
9.092
9280 in.
lbf
80 in.
lbf
Cooler bracket RH x Body LHD (w/ Air conditioning) steering position type9.09280 in.
lbf
Engine x wire7.07162 in.
lbf
Oil reservoir bracket No. 1 x Body8.08271 in.
lbf
Cooler refrigerant suction hose No. 1 x cooler bracket No, 1
LHD (w/ Air conditioning) steering position type9.09280 in.
lbf
Return tube x Body8.08271 in.
lbf
Ignition coil assy x Cylinder head cover9.09280 in.
lbf
Vane pump x Cylinder block3737727
Engine cover sub±assy x Cylinder block7.07162 in.
lbf
Front wheel RH1031,05076
1AZ±FSE:
Part TightenedN
mkgf
cmft
lbf
Oil pressure switch x Cylinder head1515311
Oil pan drain plug x Oil pan2525018
Oil pump x Cylinder block1919515
Timing chain guide x Cylinder block9.09280 in.
lbf
Chain vibration damper No.1 x Cylinder block9.09280 in.
lbf
Oil pan sub±assy x Cylinder block9.09280 in.
lbf
Transverse engine engine mounting insulator x Cylinder block5253038
Engine service cover bracket RH x Body RHD steering position type9.09280 in.
lbf
Cooler bracket RH x Body LHD steering position type9.09280 in.
lbf
Engine x wire7.07162 in.
lbf
Oil reservoir bracket No. 1 x Body8.08271 in.
lbf
Cooler refrigerant suction hose No. 1 x cooler bracket No, 1
LHD steering position type9.09280 in.
lbf
Return tube x Body8.08271 in.
lbf
Ignition coil assy x Cylinder head cover9.09280 in.
lbf
Vane pump x Cylinder block3737727
Engine cover sub±assy x Cylinder block7.07162 in.
lbf
Front wheel RH1031,05076
1CD±FTV:
Part TightenedN
mkgf
cmft
lbf
Oil drain plug x Oil pan sub±assy No. 23435025
Oil pump x Cylinder block3132023
http://vnx.su

031FZ±01
03±58
±
SERVICE SPECIFICATIONS STEERING COLUMN
AVENSIS REPAIR MANUAL (RM1018E)
TORQUE SPECIFICATION
Part TightenedN
mkgf
cmft
lbf
Steering intermediate shaft assy No. 2 x Oil pressure power steering
column assy (LHD steering positoin type)2828621
Steering sliding yoke sub±assy x Oil pressure power steering column a\
ssy
(RHD steering positoin type)2828621
Steering intermediate shaft assy No. 2 x Electric power steering column \
assy (LHD steering positoin type)3536026
Steering sliding yoke sub±assy x Electric power steering column assy
(RHD steering positoin type)3536026
Steering sliding yoke sub±assy x Steering intermediate shaft assy No.\
23536026
Steering column assy set bolt2121415
Steering sliding yoke sub±assy x Steering gear assy
(LHD steering positoin type)3536026
Steering intermediate shaft assy No. 2 x Steering gear assy
(RHD steering positoin type)3536026
Steering wheel set nut5051037
Steering wheel pad set screw (Torx screw)8.89078 in.´lbf
Steering column cover LWR x Steering column assy5.05144 in.´lbf
Instrument panel airbag assy1818413
Power steering ECU assy (Bolt A)88271 in.´lbf
Power steering ECU assy (Bolt B)15.515811
http://vnx.su

B16534Push
B16535Pull
11±18
±
FUELFUEL SYSTEM(1AZ±FE)
AVENSIS REPAIR MANUAL (RM1018E)
(f)Observe these precautions when connecting the fuel tube connectors (Quick Type):
(1)Check that there is no damage or foreign objects inthe connected part of the pipe.
(2)Match the axis of the connector with the axis of the pipe, and push into the connector until the connec-
tor makes a ºclickº sound. If the connection is tight,
apply little amount of fresh engine oil on the tip of the
pipe.
(3)After having finished the connection, check if the pipe and the connector are securely connected by
pulling on them.
(4)Check for fuel leaks.
4.CHECK FOR FUEL LEAKS
(a)Check that there are no fuel leaks after doing maintenance anywhere on t\
he fuel system. (See page 11±19)
http://vnx.su

A82344
Vinyl Bag or plastic Bag
B16534Push
B16535Pull
11±4
±
FUELFUEL SYSTEM(1ZZ±FE/3ZZ±FE)
AVENSIS REPAIR MANUAL (RM1018E)
(6)To prevent the disconnected pipe and connector from being damaged and foreign objects from being
introduced, cover them with a vinyl or plastic bag.
(f)Observe these precautions when connecting the fuel tube connectors (Quick Type):
(1)Check that there is no damage or foreign objects in
the connected part of the pipe.
(2)Match the axis of the connector with the axis of the pipe, and push into the connector until the connec-
tor makes a ºclickº sound. If the connection is tight,
apply little amount of fresh engine oil on the tip of the
pipe.
(3)After having finished the connection, check if the
pipe and the connector are securely connected by
pulling on them.
(4)Check for fuel leaks.
4.CHECK FOR FUEL LEAKS
(a)Check that there are no fuel leaks after doing maintenance anywhere on t\
he fuel system. (See page 11±5)
http://vnx.su

A60083
Fuel Pipe
Clamp No.1
AA
B12941
B12944
A82344
Vinyl Bag or plastic Bag
±
FUEL FUEL SYSTEM (1AZ±FSE)
11±31
AVENSIS REPAIR MANUAL (RM1018E)
(b) Observe the following precautions when removing and
installing fuel injectors.
NOTICE:
Never reuse the O±ring.
(1) When installing a new O±ring to the injector, becareful not to damage the injector.
(2) Coat the new O±ring with grease or gasoline before
installing. Never use engine oil, gear oil or brake oil.
(c) Observe these following precautions when disconnecting the fuel tube connector (quick type).
(1) Remove the fuel pipe clamp No.1.
(2) Check that there is no dirt or mud on the pipe and
around the connector before disconnecting them.
Clean them if necessary.
(3) Disconnect the connector from the hose while pinching part A with fingers as shown in the illustra-
tion.
(4) When the connector and the pipe are stuck, push and pull the connector to release and pull the con-
nector out from the pipe carefully.
(5) Inspect that there is no dirt or mud on the sealing
surface of the disconnected pipe. Clean it away if
necessary.
(6) To prevent the disconnected pipe and connector from being damaged and foreign objects from being
introduced, cover them with a vinyl or plastic bag.
http://vnx.su

B16534Push
B16535Pull
11±32
±
FUELFUEL SYSTEM(1AZ±FSE)
AVENSIS REPAIR MANUAL (RM1018E)
(d)Observe these precautions when connecting the fuel tube connectors (Quick Type):
(1)Check that there is no damage or foreign objects inthe connected part of the pipe.
(2)Match the axis of the connector with the axis of the pipe, and push into the connector until the connec-
tor makes a ºclickº sound. If the connection is tight,
apply little amount of fresh engine oil on the tip of the
pipe.
(3)After having finished the connection, check if the pipe and the connector are securely connected by
pulling on them.
(4)Check for fuel leaks.
4.CHECK FOR FUEL LEAKS
(a)Check that there are no fuel leaks after doing maintenance anywhere on t\
he fuel system. (See page 11±33)
http://vnx.su