audio TOYOTA C-HR 2018 1.G Quick Reference Guide
Page 32 of 48
30
TURNING THE LDA SYSTEM ON/OFF
Press the LDA switch to turn the LDA system on. Depress again to turn it off.
Note: The system will continue in the last state it was in (ON or OFF) when the
engine is started again.
Refer to a Toyota Owner’s Manual for additional information on LDA operation,
settings adjustments, limitations, and precautions before attempting to use it.
LDA w/SA in TSS-P uses an in-vehicle camera designed to detect visible white and
yellow lane markers in front of the vehicle and the vehicle’s position on the road.
If the system determines that the vehicle is starting to unintentionally deviate from
its lane, the system alerts the driver with an audio and visual alert. When the alerts
occur, the driver must check the surrounding road situation and carefully operate
the steering wheel to move the vehicle back to the center part of their lane.
LDA is designed to function at speeds of approximately 32 MPH or higher on
relatively straight roadways.
In addition to the alert function, LDA w/SA also features a steering assist
function. When enabled, if the system determines that the vehicle is on a path
to unintentionally depart from its lane, the system may provide small corrective
steering inputs to the steering wheel for a short period of time to help keep the
vehicle in its lane.
Lane Departure Alert with
Steering Assist function (LDA w/SA)
TOYOTA SAFETY SENSE™
Page 45 of 48
43
Touch Screen Display Audio1
To use the hands-free system3, it is necessary to pair a Bluetooth®2 phone with
the system. Once the phone has been paired, it is possible to use the hands-free
system
3. This operation cannot be performed while driving. You can pair up to 4
devices.
Pairing your Bluetooth® phone for the first time
1.Turn the Bluetooth®2 connection setting
of your cellular phone ON.
[See Figures 1 & 2]
a. Pairing is not available when
Bluetooth
®2 setting of your phone is set
to OFF.
2. Press the “Phone” button to display the
“Phone” screen. Touch “Yes” to register a
phone. [See Figure 3]
Figure 3 Figure 1:
iOSFigure 2: Android