tires TOYOTA C-HR 2018 1.G Quick Reference Guide

38
SAFETY & EMERGENCY FEATURES
Tire Pressure Monitoring (warning) System (TPMS)
After adjusting tire pressures, or after tires have been rotated or replaced, turn the
ignition switch to “ON” and follow the steps above to reset the TPMS.
Refer to the load label on the door jamb or the Toyota Owner’s Manual for tire
inflation specifications.
If the tire pressure indicator flashes for more than 60 seconds and then remains on,
take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or changes
in tire pressure from natural air leakage. If the system has not been initialized
recently, setting the tire pressures to factory specifications should turn off the
light.

1SFTTTUFFSJOHXIFFMTXJUDIFTi” to find and select “” from the MID.

1SFTTTUFFSJOHXIFFMTXJUDIFTi
” to select “Vehicle Settings” and then press
“
” to display menu.

1SFTTTUFFSJOHXIFFMTXJUDIFTi
” to select “ Setup” and then press “.”
You can press “
” to go back to the menu.
When initialization is complete, a message displays on MID and indicator blinks
three times on the gauge.

40
Star Safety System™
7&)*$-&45"#*-*5:$0/530- 74$

53"$5*0/$0/530- 53"$

"/5*-0$,#3",&4:45&. "#4

&-&$530/*$#3",&'03$&%*453*#65*0/ &#%

#3",&"44*45 #"

VSC helps prevent loss of traction during cornering by reducing engine power and
applying brake force to selected wheels.
Toyota’s VSC monitors steering angle and the direction your vehicle is traveling.
When it senses that the front or rear wheels begin to lose traction, VSC reduces
engine power and applies braking to selected wheels. This helps restore traction
and vehicle control.
Toyota’s ABS sensors detect which wheels are locking up and limits wheel lockup
by “pulsing” each wheel’s brakes independently. Pulsing releases brake pressure
repeatedly for fractions of a second. This helps the tires attain the traction that
current road conditions will allow, helping you to stay in directional control.
Brake Assist is designed to detect sudden or “panic” braking, and then add braking
pressure to help decrease the vehicle’s stopping distance. When there’s only a split
second to react, Brake Assist can add additional brake pressure more quickly than
just the driver alone can. VSC helps prevent loss of traction during cornering by reducing engine power, and
Traction Control helps maintain traction on loose gravel and wet, icy, or uneven
TVSGBDFTCZBQQMZJOHCSBLFGPSDFUPUIFTQJOOJOHXIFFM T

Toyota’s TRAC sensors are activated when one of the drive wheels starts to slip.
TRAC limits engine output and applies the brakes to the spinning wheel. This
transfers power to the wheels that still have traction to help keep you on track.
5PZPUBT"#4UFDIOPMPHZIBT&MFDUSPOJD#SBLFGPSDF%JTUSJCVUJPO &#%
UPIFMQ
maintain control and balance when braking. Abrupt stops can cause a vehicle to tilt
forward, reducing the braking power of the rear wheels. EBD responds to sudden
stops by redistributing brake force to enhance the braking effectiveness of all four
wheels. This vehicle comes standard with the Star Safety System
TM, which combines
7FIJDMF4UBCJMJUZ$POUSPM 74$

5SBDUJPO$POUSPM 53"$

"OUJMPDL#SBLJOH4ZTUFN
"#4

&MFDUSPOJD#SBLFGPSDF%JTUSJCVUJPO &#%

#SBLF"TTJTU #"
BOE4NBSU4UPQ
5FDIOPMPHZ 445

5HIHUWRWKH2ZQHU