display TOYOTA CAMRY 2020 (in English) User Guide

21
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Color Head-up display (HUD) (if equipped)
The head-up display can display the current vehicle speed and ECO driving
indicator in front of the driver. Also, it can display various types of information to
assist the driver.
Select “
” and then “wJOUIF.VMUJ*OGPSNBUJPO%JTQMBZ .*%
UPBDDFTT
Head-up display settings. And push “
,” to enter selection.
Refer to the Owner’s Manual for more details.
Driving assist system status/
navigation system-linked display area
(if equipped)
Shift position/speed limit display area
ECO driving indicator/Tachometer Information display areaVehicle speed display

26
Access
the audio/visual
screen Push to turn ON/OFF or
turn to adjust volume
Turn to tune
radio stations
manually or
select tracks
or filesAccess
the home screen
Access
the menu screenAccess
Toyota apps
screen
Access
the map screenAccess Bluetooth
hands-free system Seek station/track/file select
Touch screen display
FEATURES & OPERATIONS
Audio
NOTE: Concentrating on the road should always be your first priority while
driving. Do not use the Audio Multimedia System if it will distract you. Refer to the “Navigation and Multimedia System Owner’s Manual” or visit
www.toyota.com/audio-multimedia for additional resources.

29

1VTIiMENU” button next to the screen.

4FMFDUiSetup” or “General” in the touch screen to access the general settings
screen.

4FMFDUiClock.”

5IFOTFMFDUEFTJSFEJUFNTUPCFSFTFU

Refer to the “Navigation and Multimedia System Owner’s Manual” for more details.
1 Premium Audio only2 Audio Plus/Premium Audio only
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Garage door opener (HomeLink®*) (if equipped)
Garage door openers manufactured under license from HomeLink®* can be
programmed to operate garage doors, estate gates, security lighting, etc.
Refer to “Garage door opener,” Section 5-4 in the Owner’s Manual for more
details.
For programming assistance, contact HomeLink
® at 1-800-355-3515, or visit
IUUQXXXIPNFMJOLDPNUPZPUB
* HomeLink®
is a registered trademark of Gentex Corporation.
Buttons
Remote
HomeLink® indicator light
Garage door operation
indicators
Select to change time zone
Select to daylight savings
time ON/OFF/AUTO1.
Select to set to automatic
GPS adjustment of clock.2
Select to set hour display
to 12 or 24 hour time.
Clock

31
The Pre-Collision System uses a radar sensor and camera sensor to help detect a
vehicle or pedestrian in front of your vehicle.
As there is a limit to the degree of recognition accuracy and control performance
that this system can provide, do not overly rely on this system. This system will not
prevent collisions or lessen collision damage or injury in every situation. Do not use
PCS instead of normal braking operations under any circumstances. Do not attempt
to test the operation of the pre-collision system yourself, as the system may not
operate or engage, possibly leading to an accident. In some situations, such as
when driving in inclement weather such as heavy rain, fog, snow or a sandstorm or
while driving on a curve and for a few seconds after driving on a curve, a vehicle or
pedestrian may not be detected by the radar and camera sensors, preventing the
system from operating or engaging properly.
Refer to the Toyota Owner’s Manual for a list of additional situations in which the
system may not operate properly.
Refer to the Toyota Owner’s Manual for additional information on PCS w/PD
operation, settings adjustments, limitations, and precautions before attempting to
use it. Pre-Collision Warning
When the system determines that the possibility of a frontal collision is high, a
buzzer will sound and a warning message will be displayed on the Multi-Information
%JTQMBZ .*%
UPVSHFUIFESJWFSUPUBLFFWBTJWFBDUJPO
Pre-Collision Brake Assist
If the driver notices the hazard and brakes, the system may provide additional
braking force using Brake Assist. This system may prime the brakes and may apply
greater braking force in relation to how strongly the brake pedal is depressed.
Pre-Collision Braking
If the driver does not brake in a set time and the system determines that the
possibility of a frontal collision with a preceding vehicle is extremely high, the
system may automatically apply the brakes, reducing speed in order to help the
driver reduce the impact and in certain cases avoid the collision.
Pre-Collision System with Pedestrian
Detection (PCS w/PD)
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES

32
TOYOTA SAFETY SENSE™
CHANGING PCS ALERT TIMING
FarMiddle
(default)
Near

1SFTTi” switches and select or from the Multi-Information Display
.*%


1SFTTi
” switches and select “Warning sensitivity” from the MID and then
press “
”. The setting screen is displayed.

1SFTTi
” each time to change the setting. Each time it is pressed, the
response to the PCS alert timing changes as shown above. You can press “
” to
go back to the menu.
Note: PCS is enabled each time the engine switch is turned to Ignition On.
The system can be disabled/enabled and the alert timing of the system can be
changed. (Alert timing only, brake operation remains the same).
Monocular camera sensor
Millimeter
wave radar
As part of the Pre-Collision System, this function is also designed to first provide an
alert and then automatic braking if needed.
Refer to the Toyota Owner’s Manual for additional limitations and information.Under certain conditions, the PCS system included with the TSS-P package may
also help to detect a pedestrian in front of your vehicle using the in-vehicle camera
and front grille-mounted radar. The in-vehicle camera of PCS detects a potential
pedestrian based on size, profile, and motion of the detected pedestrian. However,
a pedestrian may not be detected depending on the conditions, including the
surrounding brightness and the motion, posture, size, and angle of the potential
detected pedestrian, preventing the system from operating or engaging.
PCS PEDESTRIAN DETECTION

33
%*4"#-*/(13&$0--*4*0/4:45&. 1$4

LDA in TSS-P uses an in-vehicle camera designed to detect visible white and yellow
lane markers in front of the vehicle and the vehicle’s position on the road. If the
system determines that the vehicle is starting to unintentionally deviate from its lane,
the system alerts the driver with an audio and visual alert. When the alerts occur, the
driver must check the surrounding road situation and carefully operate the steering
wheel to move the vehicle back to the center part of their lane.
-%"JTEFTJHOFEUPGVODUJPOBUTQFFETPGBQQSPYJNBUFMZNQI LNI
PSIJHIFS
on relatively straight roadways.
In addition to the alert function, LDA w/SA also features a steering assist
function. When enabled, if the system determines that the vehicle is on a path to
unintentionally depart from its lane, the system may provide small corrective steering
inputs to the steering wheel for a short period of time to help keep the vehicle in its
lane.
Lane Departure Alert with Steering Assist
(LDA w/SA)

1SFTTi” switches and select or from the Multi-Information
%JTQMBZ .*%


1SFTTi
” switches and select “PSC” from the MID and then press “”. The
setting screen is displayed.

1SFTTi
” to go back to the menu.
Note: The system is enabled each time the power switch is turned to ON
mode.
Refer to the Toyota Owner’s Manual for additional information on PCS operation,
settings adjustments, limitations, and precautions before attempting to use it.
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES

34
TOYOTA SAFETY SENSE™
TURNING THE LDA SYSTEM ON/OFF
Press the LDA switch to turn the LDA system on. Depress again to turn it off.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
Refer to the Toyota Owner’s Manual for additional information on LDA operation,
settings adjustments, limitations, and precautions before attempting to use it.
LANE DEPARTURE ALERT
LDA function display
Steering assist indicator
LDA indicatorLane markers
(2) (1) -BOF%FQBSUVSF"MFSU -%"
JOEJDBUPSTJMMVNJOBUJPOTIPXTUIFTZTUFNPQFSBUJPO
status.

35 The LDA function
EJTQMBZTXIFOUIF.VMUJ*OGPSNBUJPO%JTQMBZ .*%
JTTXJUDIFE
to the driving assist system information screen.

5IFTZTUFNEJTQMBZTXIJUFTPMJEMJOFTBOEBXIJUF-%"JOEJDBUPSXIFOWJTJCMFMBOF
markers on the road are detected and system is operating. Both the LDA indicator
and a side line flashes yellow to alert the driver when the vehicle deviates from its
lane.

5IF-%"JOEJDBUPSJTHSFFOXIFOTUFFSJOHBTTJTUGVODUJPOJTPQFSBUJOH

5IFTZTUFNEJTQMBZTPVUMJOFTPOUIF-%"JOEJDBUPSXIFOMBOFNBSLFSTPOUIFSPBE
are not detected or the function is temporarily cancelled.
Note: When operation conditions are no longer met, a function may be
temporarily canceled. However, when the operation conditions are met again,
operation of the function is automatically restored. For example, LDA may not
function on the side(s) where white/yellow lines are not detectable.
Refer to the Toyota Owner’s Manual for additional information on LDA operation,
settings adjustments, limitations, and precautions before attempting to use it.
ADJUSTING LDA ALERT SENSITIVITY
DISABLING STEERING ASSIST
5IFESJWFSDBOBEKVTUUIFTFOTJUJWJUZPGUIF-%" XBSOJOH
GVODUJPOGSPNUIF
.VMUJ*OGPSNBUJPO%JTQMBZ .*%
DVTUPNJ[BUJPOTDSFFO
High - Is designed to warn approximately before the front
tire crosses the lane marker.
Normal - Is designed to warn approximately when the front
tire crosses the lane marker.

1SFTTi
” switches and select or from the Multi-Information Display
.*%


1SFTTi
” switches and select the “Alert sensitivity” setting function and then
press “
.”

1SFTTi
” each time to change the setting.

1SFTTi
” to go back to the menu. 
1SFTTi
” switches and select or from the Multi-Information Display
.*%


1SFTTi
” switches and select the “Steering Assist” setting function and then
press “
.”

1SFTTi
” each time to change the setting.

1SFTTi
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
-"/&%&1"3563&"-&35 $0/5*/6&%

OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES

36
TOYOTA SAFETY SENSE™
SWAY WARNING SYSTEM
SWS is a function of LDA and is designed to detect swaying based on the vehicle
location in the lane and the driver’s steering wheel operation. To help prevent
swaying, the system alerts the driver using a buzzer sound and a warning displays
in the MID.
Continuous lane deviations from
swaying.
Gentle swaying from driver’s
inattentiveness.
Acute steering wheel operation after the
number of operations decrease due to driver’s
inattentiveness.

1SFTTi” switches and select or from the Multi-Information Display
.*%


1SFTTi
” switches and select the “Sway sensitivity” setting function and then
press “
.”

1SFTTi
” each time to change the setting.

1SFTTi
” to go back to the menu. 
1SFTTi
” switches and select or from the Multi-Information Display
.*%


1SFTTi
” switches and select the “Sway warning” setting function and then
press “
.”

1SFTTi
” each time to change the setting.

1SFTTi
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
ADJUSTING SWAY ALERT SENSITIVITY
DISABLING LDA SWAY WARNING SYSTEM

37
Dynamic Radar Cruise Control (DRCC) or
Full-Speed Range* DRCC
TURNING SYSTEM ON/OFF
ADJUSTING SET SPEED
Vehicle will cruise at a set speed, decelerate to maintain selected distance from a
slower vehicle traveling in front and accelerate back up to the selected speed if the
vehicle in front changes lanes or speeds up.
(1) Push “
” to turn DRCC system ON.
(2) Use the steering wheel controls to increase speed by pushing “+RES” or
decrease the speed by pushing “-SET”. Push and hold to make a large
BEKVTUNFOUPSQVTIFBDIUJNFUPNBLFGJOFBEKVTUNFOUT NQI<LNI>PS
LNI<NQI>JODSFNFOUT

(3) Push “Cancel” to cancel the adjusting speed operation.(1)
(2) (3)
DRCC helps maintain a pre-set distance to a preceding vehicle when the preceding
vehicle is traveling at a lower speed. This mode is always selected first when the cruise
control button is depressed. Constant speed cruise control mode is also available.
DRCC is designed to function at speeds between approximately 30 to 110 MPH and is
intended for highway use. Full-Speed Range* DRCC is designed to function at speeds
between 0 to approximately 110 MPH and is intended for highway use.
Resume/
Set speed
Cruise control
Set speed*If equipped.
Cancel
Cruise control
switches
1VTIPODF0O
1VTIUXJDF0GG
Refer to page 39 for switching to Constant Speed (Cruise) Control Mode.
1 5IFTFUTQFFENBZCFSFTVNFEPODFWFIJDMFTQFFEFYDFFETNQI LNI
2 The set speed may also be cancelled by depressing the brake pedal.
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Display
Set speedDynamic Radar Cruise Control
vehicle-to-vehicle distance button
Indicators
Increase speed/Resume1
Cancel2
Decrease speed