low beam TOYOTA CAMRY HYBRID 2018 Owners Manual (in English)

OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
5
Brake system warning1Malfunction/
Check Engine indicator1
Brake system warning
Driver seat belt reminder and/
or front passenger seat belt reminder
(alarm will sound if speed is over 12 mph)
Low Tire Pressure Warning1
Low fuel level warning
Theft deterrent/ Engine Immobilizer
system indicator
Fuel tank door position
Cruise control
indicators2,3
READY indicator
Master warning
1
Headlight low/high beam
indicators
Turn signal indicator
Pre-Collision System (PCS)
warning light1,3
Lane Departure Alert (LDA) indicator
Slip indicator1
Vehicle Stability Control OFF indicator1
Parking brake indicator3
Electric power steering warning1
Intelligent Clearance Sonar (ICS) OFF
indicator1,3,4
Rear passenger seat belt reminder
indicator Type A
Rear passenger seat belt reminder
indicator Type B
Electric brake hold operated indicator1,3
Electric brake hold standby indicator1
BSM w/Rear Cross Traffic Alert (RCTA)
Indicator4
BSM outside rear view mirror
indicators4
Intuitive Parking Assist (IPA) indicator4
Sport mode driving indicatorECO MODE indicator
EV drive mode indicator
EV indicator
Low outside temperature indicator
3Light flashes to indicate a malfunction.4If equipped.

14
HEADLIGHTS
TURN SIGNALS
Lights & turn signals
FEATURES & OPERATIONS
-Daytime Running Light system (DRL)Automatically turns on the headlights at a
reduced intensity.
-Automatic light cut off system"VUPNBUJDBMMZUVSOTMJHIUTPGGBGUFSTFDPOE
delay, or lock switch on remote may be pushed after locking.
1 The right hand signals will flash three times.2 The left hand signals will flash three times.
Parking lights Headlights
DRL OFF
AUTO
High beam
High beam
flasher
Right turn
Lane change1
Lane change2
Left turn
Low beam

37
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
AHB is a safety system designed to help drivers see more of what’s ah\
ead at
nighttime without dazzling other drivers. When enabled, AHB uses an in-v\
ehicle
camera to help detect the headlights of oncoming vehicles and tail light\
s of
preceding vehicles, then automatically switches between high and low bea\
ms
as appropriate to provide the most light possible and enhance forward vi\
sibility.
By using high beams more frequently, the system may allow earlier detect\
ion of
pedestrians and obstacles.
Refer to a Toyota Owner’s Manual for additional information on AHB op\
eration,
settings adjustments, limitations, and precautions before attempting to \
use it.
Automatic High Beams (AHB)

8JUIUIFFOHJOFTXJUDIJO*(/*5*0/0/NPEF
UVSOUIFIFBEMJHIUTXJUDIUP
“AUTO” position.

1VTIMFWFSBXBZGSPNZPV

1SFTTUIFi
” switch.
The AHB indicator will come on when the headlights are turned on automat\
ically
to indicate that the system is active.
Note: Pull the lever back toward you to turn the AHB system off.
The AHB indicator will turn off. Turn switch to “
” position and the manual high
beam indicator “
” turns on.
When all of these conditions are met, high beams will be automatically t\
urned on
BGUFSBQQSPYJNBUFMZTFDPOE

t7FIJDMFTQFFEJTBCPWFBQQSPYJNBUFMZNQI LNI

• The area ahead of the vehicle is dark.
• There are no oncoming or preceding vehicles with headlights or tail\
lights turned
on.
• There are few street lights on the road ahead.
If any of these conditions occur, the system is designed to automaticall\
y turn off
high beams:
t7FIJDMFTQFFEESPQTCFMPXBQQSPYJNBUFMZNQI LNI

• The area ahead of the vehicle is not dark.
• Oncoming or preceding vehicles have headlights or tail lights turne\
d on.
• There are many streetlights on the road ahead.
ACTIVATING THE AHB SYSTEM
CONDITIONS WHERE AHB WILL TURN ON/OFF AUTOMATICALLY
(1)(2)