stop start TOYOTA CAMRY HYBRID 2019 Accessories, Audio & Navigation (in English)
Page 32 of 354
32
1. BASIC INFORMATION BEFORE OPERATION
1. INITIAL SCREEN
Vehicles without a smart key system
When  the  engine  switch  is  turned  to  the
“ACC”  or  “ON”  position,  the  initial  screen
will be displayed and  the system will begin
operating.
 Vehicles with a  smart key system
When the engine <power> switch is turned
to  ACCESSORY  or  IGNITION  ON  <ON>
mode,  the  initial  screen  will  be  displayed
and the system will begin operating.
 After  a  few  seconds,  the  caution  screen
will be displayed.
 After  about  5  seconds  or  selecting  “Con-
tinue” ,  the  caution  screen  automatically
switches to the next screen.
1Press and hold the  “PWR·VOL” knob
for 3 seconds or more.
WA R N I N G
● When  the  vehicle  is  stopped  with  the
engine running <the hybrid system oper-
ating>,  always  apply  the  parking  brake
for safety.
MAINTENANCE 
INFORMATION*
This system reminds users when to re-
place certain parts or components and
shows  dealer  information  (if  regis-
tered) on the screen.
When the vehicle reaches a previously
set  driving  distance  or  date  specified
for  a  scheduled  maintenance  check,
the maintenance remainder screen will
be  displayed  when  the  system  is
turned on.
 To  prevent  the  screen  from  being  dis-
played  again,  select  “Do  Not  Tell  Me
Again” .
 To  register  maintenance  information:
P. 7 2
 If   is  selected,  the  registered
phone number can be called.
RESTARTING THE SYSTEM
When  system  response  is  extremely
slow, the system can be restarted.
*: Entune Premium Audio only 
Page 248 of 354
248
3. WHAT TO DO IF...
Even  though  all  con-
ceivable  measures
have  been  taken,  the
symptom  status  does
not change.
The  cellular  phone
is  not  close  enough
to this system.Bring  the  cellular
phone  closer  to  this
system.
Radio  interference
has occurred.Turn off Wi-Fi® devices
or  other  devices  that
may emit radio waves.
The  cellular  phone
is the most likely
cause  of  the  symp-
tom.
Turn the cellular phone
off,  remove  and  rein-
stall  the  battery  pack,
and  then  restart  the
cellular phone. 
Enable  the  cellular
phone’s  Bluetooth®
connection.
Disable  the  Wi-Fi®
connection of the cellu-
lar phone.
Stop  the  cellular
phone’s  security  soft-
ware  and  close  all  ap-
plications.
Before  using  an  appli-
cation  installed  on  the
cellular phone, careful-
ly check its source and
how its operation might
affect this system.
 : For details, refer to the owner’s manual that came with the ce llular phone.
SymptomLikely causeSolution
Page
Cellular 
phoneThis 
system 
Page 261 of 354
261
1. BASIC OPERATION
NAVIGATION SYSTEM
8
1Select    on  the  map  screen.
(P.252)
2Select “Route Trace”.
The route trace starts. 
3Check  that  the  traveled  line  is  dis-
played.
1Select    on  the  map  screen.
(P.252)
2Select  “Route Trace” again.
3A  confirmation  screen  will  be  dis-
played. 
“Yes”:  Select  to  keep  the  recorded
route trace.
“No” :  Select  to  erase  the  recorded
route trace.
ROUTE TRACE
The  traveled  route  can  be  stored  and
retraced  on  the  map  screen.  This  fea-
ture is available when the map scale is
30 miles (50 km) or less.
STOP RECORDING THE 
ROUTE TRACE
INFORMATION
● The  traveled  route  can  be  stored  up  to
621 miles (1000 km). 
Page 279 of 354
279
2. DESTINATION SEARCH
NAVIGATION SYSTEM
8
■ADDING DESTINATIONS
1Select “Add”.
2Search  for  an  additional  destination  in
the same way as a destination search.
(P.265)
Up to 5 destinations can be set.
When the vehicle is stopped
3Select the  “Add Destination Here”  at
the position in the route which you want
to add the destination.
 While driving
3Select  “Beginning”  or “End”.
■DELETING DESTINATIONS
1Select  “Delete” .
2Select “Yes”  when  the  confirmation
screen appears.
 If more than one destination has been set,
select  the  destination(s)  to  be  deleted.
(The  navigation  system  will  recalculate
route(s)  to  the  remaining  set  destina-
tion(s).)
A ROUTE FROM THE Toyota 
Entune CENTER* (VEHICLES 
WITH DCM)
When  starting  route  guidance  or  re-
routing,  a  route  can  be  provided  auto-
matically by the Toyota Entune center.
This function is available when dynam-
ic route setting is enabled. ( P.297)
*: This function is not availabl e in some countries and areas.