AUX TOYOTA ECHO 2000 Accessories, Audio & Navigation (in English)

TVIP V3 RS3200 SYSTEM PROGRAMMING INSTRUCTIONS
2 of 10
Page 2 TOYOTA TVIP SY STEM PROGRAMMING −RS3200

A DD AD DI TIONAL R EMOTE CO NTROL( S) TO SYSTEM
Follow this procedure to add additional rem ote contro ls to a system . The RS3200 may be progra mmed to
operate with a maxi mum of four re mote contro ls. When a new remote controls is progra mmed, it will work
in the default operatio n mode (press the UNLOCK but ton twice to un lock all doors and no AUX button
func tion on 4 but ton remote contro ls); to change the operation mode , you must perfor m the separate
REMOTE CONTROL FUNCTI ON SELECT procedure as sh own on pag es 6 and 7.
























* I f the system does not ac tiv a te the lights, buzzer and door locks 1 t ime, start ov er.
1. Before you begin: Open the dr iv er’s door
and remove the key f rom
the ignition switch .
2. Start the programming procedure. (Co mplete these step s within 40 seconds. )
a. Insert the key into,
and remove it from
the ign ition switch
2 times. b.
Close, then open
the driver’s door
2 times. c.
Insert the key into,
and remove it from
the ignition switch
1 time. d.
Close, the open
the driver’s door
2 times.
e. Insert the key into,
the ignition switch
and leave it in. f.
Close the driver’s
door. g.
Turn t he key from
LOCK to ON, then
back to LOCK. h.
Remove the key
from the ignition
switch.
i. The ta il and marker l ights flas h 1 time,
the buzzer chirps 1 time and the doors
lock and unlock 1 time.*

TVIP V3 RS3200 SYSTEM PROGRAMMING INSTRUCTIONS
4 of 10
Page 4 TOYOTA TVIP SY STEM PROGRAMMING −RS3200

REPROGRA M EXISTING REM OTE CON TROLS
Follow this procedure to clear all existing remote control codes and rep\
rogram existing remote controls to
a system. When existing remote controls are reprogrammed, they will work\
in the default operation mode
(press the UNLOCK button twice to unlock all doors and no AUX button fu\
nction on 4 button remote
controls); to change the operation mode, you must perform the separate \
REMOTE CONTROL FUNCTION
SELECT procedure as shown on pages 6 and 7.























*I f the system does not act iv ate the lights, buzzer and d oor locks 2 tim es, start over.
1. Before you begin:
Open the driver’s door and remove the key from
the ignition switch.
2.
Start the programming procedure: (Co mplete these step s within 40 seconds. )
a. Insert the key into,
and remove it from
the ignition switch
2 times. b.
Close, then open
the driver’s door
2 times. c.
Insert the key into,
and remove it from
the ignition switch
1 time. d.
Close, then open
the driver’s door
2 times.
e. Insert the key into
the ignition switch
and leave it in. f.
Close the driver’s
door. g.
Turn t he key from
LOCK to ON 2 times
(ending at LOCK). h.
Remove the key
from the ignition
switch.
i. The ta il and marker l ights flas h 2 times, the buzzer
chirps 2 times and the doors lock and unlock 2 times.*

TVIP V3 RS3200 SYSTEM PROGRAMMING INSTRUCTIONS
6 of 10
Page 6 TOY OTA TVIP SY STEM PROGRAMMING −RS3200

REMOTE CON TROL FUNC TION SELEC T
Fol low this procedure to ch ange the opera ting func tions of re mote contro ls already progr am med into a
system. You may change the remote control’s default unlock operation \
mode so that pressing the UNLOCK
button once causes al l doors to unlock at the same time. Also, you may activ ate the AUX button func tion
on 4 button remote cont rols.
























* I f the system does not ac tiv a te the lights, buzzer and door locks 4 t imes, start over .
1. Before you begin:
Open the driver’s door and remo ve the key
f rom the ign ition switch .

2.
Start the programming procedure. (Co mplete these step s within 40 seconds. )
a. Insert the key into,
and remove it from
the ignition switch
2 times. b.
Close, then open
the driver’s door
2 times. c.
Insert the key into,
and remove it from
the ignition switch
1 time. d.
Close, then open
the driver’s door
2 times.
e. Insert the key into,
the ignition switch
and leave it in. f.
Close the driver’s
door. g.
Turn t he key from
LOCK to ON 4 times
(ending at LOCK). h.
Remove the key
f rom the ign ition
switch.
i. The tail and marker lights flash 4 times,
the buzzer chirps 4 times and the doors
lock and unlock 4 times.*

TVIP V3 RS3200 SYSTEM PROGRAMMING INSTRUCTIONS
7 of 10
7

e
g
a
P

G
N
I
M
M
A
R
G
O
R
P

M
E
T
S
Y
S

P
I
V
T

A
T
O
Y
O
T


REMOTE CON TROL FUNC TION SELEC T (cont inued)




















* Program for 4 button re mote contro ls, only.
If the system ac tiva tes the lights, buzzer and door locks 2 times, start over .
3.
Select the operating functions for an existi ng remot e control.
a. Press and release both the LOCK and UNLOCK
buttons on one remote control at the same time.
b. Select o ne of the following modes:
Press and release the
LOCK button to select
double unlock function
(press the UNLOCK
button twice to unlock
all the doors.) or
Press and release
the UNLOCK button
to select all door
unlock function
(press the UNLOCK
button once to unlock
all the doors at the
same time.) or
Press and release
the AUX button to
select double
unlock function
(press the UNLOCK
button twice to unlock
all the doors) and
activate the auxilary
output for the optional
electric trunk release
accessory. * or

Press and release
the PANIC button to
select all d oor unlock
function (press the
UNLOCK button once
to un lock all the doors
at the same ti me)
and activate

c. The ta il and marker l ights flas h 1 time, the
buzzer chirps 1 time, and the dorrs lock
and unlock 1 time.
Note: Repeat the ab ove steps to select the operating
functions for addi tiona l re mote contro ls.
4. Complete the pro gramming
ste ps.
a.
Open the dr iv er ‘s door.