TOYOTA FJ CRUISER 2008 1.G Owners Manual

204 3−2. Using the audio system
 Display
Up to 12 characters can be displayed at a time.
If there are 13 characters or more, pressing and holding or
for
1 second or more will display the remaining characters.
A maximum of 24 characters can be displayed.
If or is pressed for 1 second or more again or has not been
pressed for 6 seconds or more, the display will return to the first 12 charac−
ters.
Depending on the contents recorded, the characters may not be displayed
properly or may not be displayed at all.
Canceling random playback
Press (RAND) or
(RAND) again.
 Canceling repeat play
Press (RPT) or (RPT) again.
 Error messages
Refer to the following table and take the appropriate measures. If the prob−
lem is not rectified, take the vehicle to your Toyota dealer.
MessageCauseCorrection
Procedures
ERROR 1The disc may be dirty
or damaged
The disc may be
inserted upside downClean the disc
Insert the disc cor−
rectly
ERROR 3There is a problem
within the systemEject the disc or mag−
azine
ERROR 4 Over−currentAsk your Toyota
dealer
WAI TOperation is stopped
due to a high temper−
ature inside the playerEject the disc and
allow the player to
cool down
CD OPENThe external CD
changer lid is open
Close the lid

205
3−2. Using the audio system
3
Interior features
 Discs that can be used
Discs with the marks shown below can be used.
Playback may not be possible depending on recording format or disc fea−
tures, or due to scratches, dirt or deterioration.
CDs with copy−protect features may not be used.
CD player protection feature
To protect the internal components, playback is automatically stopped when
a problem is detected while the CD player is being used.

If CDs are left inside the CD pla yer or in the ejected position for
extended periods
CDs may be damaged and may not play properly.

Lens cleaners
Do not use lens cleaners. Doing so may damage the CD player.
MessageCauseCorrection
Procedures
NO DISCThere is no disc in the
CD changer
Insert a disc

206 3−2. Using the audio system
NOTICE
 CDs and adapters that cannot be used
Do not use the following types of CDs or 3 in. (8 cm) CD adapters or Dual
Disc.
Doing so may damage the CD player and/or the CD insert/eject function.
 CDs that have a diameter that is not 4.7
in. (12 cm)
 Low−quality and deformed CDs
 CDs with a transparent or translucent
recording area
 CDs that have had tape, stickers or CD−
R labels attached to them, or that have
had the label peeled off

207
3−2. Using the audio system
3
Interior features
NOTICE
 CD player precautions
Failure to follow the precautions below may result in serious damage to the
CDs or the player itself.
 Do not insert anything other than CDs into the CD slot.
Do not apply oil to the CD player.
Store CDs away from direct sunlight.

Never try to disassemble any part of the CD player.
 Do not insert more than one CD at a
time

208
3−2. Using the audio system
Playing back MP3 and WMA discs
Type A
Type B
Random playback File selectionFile selection
Repeat playPlayback
Disc eject
Display text message
Folder selection
Search playback
Vo l u m ePower
Fast−forward
Reverse
Vo l u m e
Random playback
File selectionFile selection
Repeat playPlaybackPower
Disc eject
Display text message
Folder selection
Search
playback
Disc selection
Fast−forwardReverse

209
3−2. Using the audio system
3
Interior features
Loading MP3 and WMA discs
 Loading a disc (type A)
Insert a disc.

Loading a disc (type B)
Press .
“WAIT” is shown on the display.
Insert a disc when the indicator on the slot turns from amber
to green.
The display changes from “WAIT” to “LOAD”.
 Loading multiple discs (type B only)
Press and hold until you hear a beep.
“WAIT” is shown on the display.
Insert a disc when the indicator on the slot turns from amber
to green.
The display changes from “WAIT” to “LOAD”.
The indicator on the slot turns to amber when the disc is inserted.
Insert the next disc when the indicator on the slot turns from
amber to green again.
Repeat the procedure for the remaining discs.
To stop the operation, press .
Ejecting MP3 and WMA discs
 Ejecting a disc (type A)
Press and remove the disc.

Ejecting a disc (type B)
To select the disc to be ejected, press
() or
().
The number of the disc selected is shown on the display.
Press and remove the disc.

210 3−2. Using the audio system
 Ejecting all the discs (type B only)
Press and hold until you hear a beep, and then remove the
discs.
Selecting a disc (type B only)
 Selecting the desired disc
Press ( ) or
( ).
Selecting a folder
 Selecting folders one at a time
To select the desired folder, press “ ” or “ ” on or .
 Selecting the desired folder by cueing the first file of each
folder
Press and hold or until you hear a beep.
The first 10 seconds of the first file in the each folder will be played.
When the desired folder is reached, press the switch once again.

Returning to the first folder
Press and hold “
” on or until you hear a beep.
Selecting and scanning files
 Selecting one file at a time
To select the desired file, turn the or or press “ ” or
“
” on or .

211
3−2. Using the audio system
3
Interior features
 Selecting the desired file by cueing the files in the folder
Press or .
The first 10 seconds of all files in the folder will be played.
When the desired file is reached, press the switch once again.
Fastforwarding and reversing files
To fast−forward or reverse.
Type A: Press and hold ( ) or ( ).
Type B: Press and hold ( ) or ( ).
Repeat play
 Repeating a file
Press (RPT) or (RPT).

Repeating all of the files in the folder
Press and hold (RPT) or (RPT) until you hear a beep.
Random playback
 Playing files from a particular folder in random order
Press (RAND) or (RAND).

Playing all of the files on a disc in random order
Press and hold (RAND) or (RAND) until you hear a
beep.
Switching the display
Press or .
Each time the switch is pressed, the display changes in the order of
Folder no./File no./Elapsed time
Folder name File name Album title
(MP3 only) Track title
Artist name.

212 3−2. Using the audio system
 Display
Up to 12 characters can be displayed at a time.
If there are 13 characters or more, pressing and holding or
for 1 second or more will display the remaining characters.
A maximum of 24 characters can be displayed.
If or is pressed for 1 second or more again or has not been
pressed for 6 seconds or more, the display will return to the first 12 charac−
ters.
Depending on the contents recorded, the characters may not be displayed
properly or may not be displayed at all.
Canceling random playback
Press
(RAND) or
(RAND) again.
 Canceling repeat play
Press (RPT) or (RPT) again.
Error messages
Refer to the following table and take the appropriate measures. If the prob−
lem is not rectified, take the vehicle to your Toyota dealer.
MessageCauseCorrection
Procedures
ERROR 1The disc may be dirty
or damaged
The disc may be
inserted upside downClean the disc
Insert the disc cor−
rectly
ERROR 3There is a problem
within the systemEject the disc or mag−
azine
ERROR 4 Over−currentAsk your Toyota
dealer
WAI TOperation is stopped
due to a high temper−
ature inside the player
Eject the disc and
allow the player to
cool down

213
3−2. Using the audio system
3
Interior features
 Discs that can be used
Discs with the marks shown below can be used.
Playback may not be possible depending on recording format or disc fea−
tures, or due to scratches, dirt or deterioration.
 MP3 and WMA player protection feature
To protect the internal components, playback is automatically stopped when
a problem is detected while the MP3 and WMA player is being used.
 If discs are left inside the MP3 and WMA player or in the ejected posi
tion for extended periods
Discs may be damaged and may not play properly.
Lens cleaners
Do not use lens cleaners. Doing so may damage the MP3 and WMA player.
 MP3 and WMA files
MP3 (MPEG Audio LAYER3) is a standard audio compression format.
Files can be compressed to approximately 1/10 of their original size by using
MP3 compression.
WMA (Windows Media
TM Audio) is a Microsoft audio compression format.
This format compresses audio data to a size smaller than that of the MP3
format.
There is a limit to the MP3 and WMA file standards and to the media/formats
recorded by them that can be used.
MP3 file compatibility
Compatible standards
MP3 (MPEG1 LAYER3, MPEG2 LSF LAYER3)
MessageCauseCorrection
Procedures
NO MUSICThis indicates that no
playable data is
included in the disc
Eject the disc