warning TOYOTA HIGHLANDER 2007 XU40 / 2.G Navigation Manual

ii
Important information about this manual
For safety reasons, this manual indicates
items requiring particular attention with the
following marks.
CAUTION
This is a warning against anything
which may cause injury to people if the
warning is ignored. You are informed
about what you must or must not do in
order to reduce the risk of injury to
yourself and others.
NOTICE
This is a warning against anything
which may cause damage to the ve-
hicle or its equipment if the warning is
ignored. You are informed about what
you must or must not do in order to
avoid or reduce the risk of damage to
your vehicle and its equipment.
INFORMATION
This provides additional information.
Initial screen
When you start the engine or turn the ignition
switch to the “ACC” position, the initial
screen appears and the system begins
operating.
CAUTION
When the vehicle is stopped with the
engine running, always apply the park-
ing brake for safety.
After a few seconds, the “CAUTION” screen
appears.
Touch either “English” or
“Français” to select a language. Read
and follow the instructions.
When you touch the
“I Agree” switch
on the screen, the map screen appears.
You can access this screen when you push
the
“INFO” button and touch the “Lan-
guage”
switch. Then you can select a lan-
guage.

14
WARNINGS
The DATABASE comprises facts and in-
formation from government and other
sources reflecting circumstances in exis-
tence before you received the DATA-
BASE, which may contain errors and
omissions. Accordingly, the DATABASE
may contain inaccurate or incomplete in-
formation due to the passage of time,
changing circumstances, and due to the
nature of the sources used. The DATA-
BASE does not include or reflect informa-
tion relating to, among other things,
neighborhood safety; law enforcement;
emergency assistance; construction
work; road or lane closures; vehicle or
speed restrictions; road slope or grade;
bridge height, weight or other limits; road
or traffic conditions; special events; traf-
fic congestion; or travel time.U.S. GOVERNMENT RIGHTS
If you are an agency, department, or
other entity of the United States
Government, or funded in whole or in part
by the United States Government, then
use, duplication, reproduction, release,
modification, disclosure or transfer of this
commercial product and accompanying
documentation, is restricted in accor-
dance with the LIMITED or RE-
STRICTED rights as described in
DFARS 252.227−7014(a)(1) (JUN 1995)
(DOD commercial computer software
definition), DFARS 227.7202−1 (DOD
policy on commercial computer soft-
ware), FAR 52.227−19 (JUN 1987)
(commercial computer software clause
for civilian agencies), DFARS
252.227−7015 (NOV 1995) (DOD techni-
cal data − commercial items clause);
FAR 52.227−14 Alternates I, II, and III
(JUN 1987) (civilian agency technical
data and noncommercial computer
software clause); and/or FAR 12.211 and
FAR 12.212 (commercial item acquisi-
tions), as applicable. In case of conflict
between any of the FAR and DFARS
provisions listed herein and this Agree-
ment, the construction that provides
greater limitations on the Government’s
rights shall control.Contractor/manufacturer is Tele Atlas
North America, Inc., 11 Lafayette Street,
Lebanon, NH 03766−1445. Phone:
603.643. 0330. The DATABASE is ©
1984−2005 by Tele Atlas North America,
Inc. ALL RIGHTS RESERVED. For
purpose of any public disclosure provi-
sion under any federal, state or local law,
it is agreed that the DATABASE is a trade
secret and a proprietary commercial
product and not subject to disclosure.

18
Restrictions. Except where you have
been specifically licensed to do so by
[CLIENT], and without limiting the pre-
ceding paragraph, you may not (a) use
this Data with any products, systems, or
applications installed or otherwise con-
nected to or in communication with ve-
hicles, capable of vehicle navigation,
positioning, dispatch, real time route
guidance, fleet management or similar
applications; or (b) with or in communica-
tion with any positioning devices or any
mobile or wireless−connected electronic
or computer devices, including without
limitation cellular phones, palmtop and
handheld computers, pagers, and per-
sonal digital assistants or PDAs.
Warning.
The Data may contain inaccu-
rate or incomplete information due to the
passage of time, changing circum-
stances, sources used and the nature of
collecting comprehensive geographic
data, any of which may lead to incorrect
results.No Warranty.
This Data is provided to
you “as is,” and you agree to use it at your
own risk. [CLIENT] and its licensors (and
their licensors and suppliers) make no
guarantees, representations or warran-
ties of any kind, express or implied, aris-
ing by law or otherwise, including but not
limited to, content, quality, accuracy,
completeness, effectiveness, reliability,
fitness for a particular purpose, useful-
ness, use or results to be obtained from
this Data, or that the Data or server will be
uninterrupted or error−free.
Disclaimer of Warranty:
[CLIENT] AND
ITS LICENSORS (INCLUDING THEIR
LICENSORS AND SUPPLIERS) DIS-
CLAIM ANY WARRANTIES, EXPRESS
OR IMPLIED, OF QUALITY, PER-
FORMANCE, MERCHANTABILITY, FIT-
NESS FOR A PARTICULAR PURPOSE
OR NON−INFRINGEMENT. Some
States, Territories and Countries do not
allow certain warranty exclusions, so to
that extent the above exclusion may not
apply to you.
Disclaimer of Liability: [CLIENT] AND
ITS LICENSORS (INCLUDING THEIR
LICENSORS AND SUPPLIERS) SHALL
NOT BE LIABLE TO YOU IN RESPECT
OF ANY CLAIM, DEMAND OR ACTION,
IRRESPECTIVE OF THE NATURE OF
THE CAUSE OF THE CLAIM, DEMAND
OR ACTION ALLEGING ANY LOSS, IN-
JURY OR DAMAGES, DIRECT OR IN-
DIRECT, WHICH MAY RESULT FROM
THE USE OR POSSESSION OF THE
INFORMATION; OR FOR ANY LOSS
OF PROFIT, REVENUE, CONTRACTS
OR SAVINGS, OR ANY OTHER DI-
RECT, INDIRECT, INCIDENTAL, SPE-
CIAL OR CONSEQUENTIAL DAM-
AGES ARISING OUT OF YOUR USE
OF OR INABILITY TO USE THIS IN-
FORMATION, ANY DEFECT IN THE IN-
FORMATION, OR THE BREACH OF
THESE TERMS OR CONDITIONS,
WHETHER IN AN ACTION IN CON-
TRACT OR TORT OR BASED ON A
WARRANTY, EVEN IF [CLIENT] OR ITS
LICENSORS HAVE BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAM-
AGES. Some States, Territories and
Countries do not allow certain liability ex-
clusions or damages limitations, so to
that extent the above may not apply to
you.

11 3 “After refueling”
The average fuel consumption is calculated
and displayed based on total driving distance
and total fuel consumption with the engine
running.
The displayed value is updated every 10 sec-
onds.
Every time you refuel the vehicle, the calcula-
tion is reset. When refueling, be sure to stop
your vehicle and turn the ignition switch off.
“Cruising range”
The distance the vehicle can travel with the
remaining fuel is calculated and displayed
based on the quantity of remaining fuel and
past fuel consumption.
The driving range display indicates the
approximate distance that you can drive until
the fuel gauge reaches “E”. It is different from
the actual distance traveled.
The displayed value is updated every time the
fuel equivalent for 1 mile or 1 km is consumed.
Every time you refuel the vehicle, the calcula-
tion is reset. When refueling, be sure to stop
your vehicle and turn the ignition switch off.
The actual driving range varies with driving
habits and road conditions. If fuel consump-
tion is good, the driving range will be longer.
If fuel consumption is poor, the driving range
will be shorter.If the low fuel level warning light comes on, re-
fuel even if the display indicates that the ve-
hicle can be driven further.
“Average speed”
The average speed is calculated and dis-
played based on the total driving distance and
the total driving time after the engine is star-
ted.
The displayed value is updated every 10 sec-
onds.
“Distance”
The distance after engine starting is dis-
played.
“Reset”
To reset the calculations of “Average speed”
and “Distance”.
Screen setting
1. Push the “INFO” button to display the
“Information Menu” screen.
2. Touch the “Screen Setting” switch.

122
CAUTION
For vehicles sold in U.S.A. and Canada:
Part 15 of the FCC Rules
FCC Warning:
Any unauthorized changes or modifi-
cations to this equipment will void
the user’s authority to operate this
device.
Laser products
Do not take this unit apart or
attempt to make any changes
yourself. This is an intricate unit
that uses a laser pickup to retrieve
information from the surface of
compact discs. The laser is
carefully shielded so that its rays
remain inside the cabinet.
Therefore, never try to
disassemble the player or alter
any of its parts since you may be
exposed to laser rays and
dangerous voltages.
This product utilizes a laser. Use
of controls or adjustments or
performance of procedures other
than those specified herein may
result in hazardous radiation
exposure.
(a) Turning the system on and off
“PWR·VOL”: Push this knob to turn the audio
system on and off. Turn this knob to adjust the
volume. The system turns on in the last mode
used.
“AUDIO”: Push this button to display
switches for audio system (audio control
mode).
You can select the function that enables auto-
matic return to the previous screen from the
audio screen. See page 113 for details.Push “AM”, “FM”, “TAPE” or “DISC” but-
ton to turn on the desired mode. The se-
lected mode turns on immediately.
Push these buttons if you want to switch from
one mode to another.
If the tape or disc is not set, the cassette play-
er or compact disc player does not turn on.
You can turn off each player by ejecting the
cassette tape or compact disc. If the audio
system was previously off, then the entire au-
dio system will be turned off when you eject
the cassette tape or compact disc. If another
function was previously playing, it will come
on again.