TOYOTA HIGHLANDER 2013 XU50 / 3.G Navigation Manual

AUDIO/VIDEO SYSTEM
231
DVD VIDEO DISC GLOSSARY
DVD video discs: Digital versatile Disc
that holds video. DVD video discs have
adopted “MPEG2”, one of the world stan-
dards of digital compression technologies.
The picture data is compressed by 1/40 on
average and stored. Variable rate en-
coded technology in which the volume of
data assigned to the picture is changed de-
pending on the picture format has also
been adopted. Audio data is stored using
PCM and Dolby digital, which enables
higher quality of sound. Furthermore, mul-
ti−angle and multi −language features will
also help you enjoy the more advanced
technology of DVD video.
Viewer restrictions: This feature limits
what can be viewed in conformity with a
level of restrictions of the country. The lev-
el of restrictions varies depending on the
DVD video disc. Some DVD video discs
cannot be played at all, or violent scenes
are skipped or replaced with other scenes.
Level 1: DVD video discs for children can
be played.
Level 2 − 7: DVD video discs for children
and G− rated movie can be played.
Level 8: All types of the DVD video discs
can be played.
Multiangle feature: You can enjoy the
same scene at different angles.
Multilanguage feature: You can select a
language of the subtitle and audio. Region
codes: The region codes are pro-
vided on DVD players and DVD discs. If
the DVD video disc does not have the
same region code as the DVD player, you
cannot play the disc on the DVD player.
For region codes, see page 230.
Audio: This DVD player can play liner
PCM, Dolby digital and MPEG audio for-
mat DVD. Other decoded type cannot be
played.
Title and chapter: Video and audio pro-
grams stored in DVD video disc are divid-
ed in parts by title and chapter.
Title: The largest unit of the video and au-
dio programs stored on DVD video discs.
Usually, one piece of movie, one album, or
one audio program is assigned as a title.
Chapter: The unit smaller than that of title.
A title comprises plural chapters.
Manufactured under license from
Dolby Laboratories. “Dolby”, “Pro Log-
ic”, and the doubleD symbol are trade-
marks of Dolby Laboratories. Confi-
dential unpublished works.

19921997 Dolby Laboratories. All
rights reserved.
“DTS” is a trademark of Digital Theater
Systems, Inc.

AUDIO/VIDEO SYSTEM
232

Remote controller
1Selecting a switch
2Selecting a chapter
3Playing/pausing a disc
4Reversing a disc
5Displaying operation switches
6Inputting the selected switch
7Fast forwarding a disc
8Stopping a disc
9Changing the initial setting
Unit
1Skipping to the desired chapter
2Playing/pausing a disc
3Selecting a switch
4Inputting the selected switch
— Using the DVD player
(video CD)

AUDIO/VIDEO SYSTEM
233

Display (page 1)
1Selecting a disc menu number
2Turning off the menu screen
3Displaying to page 2
4Turning on the disc menu
5Returning to the previous page
screen (with the disc menu dis-
played)
6Proceeding to the next page screen
(with the disc menu displayed)
7Changing to a multiplex transmission
Display (page 2)
8Displaying to page 1
9Reversing a disc
10Pausing
the disc/canceling the pause
11Fast forwarding a disc
INFORMATION
To operate from the front audio sys-
tem, see “— DVD player operation”
on page 187.

AUDIO/VIDEO SYSTEM
234

Selecting a disc menu number
Select “Select Number” to display the
disc menu number search screen.
Select the disc menu number, and push
“ENT” to input it.
Select “Back” to return to the previous
screen.Using the control screen
Using the control screen, push or
to display the control screen.
1Repeat play
2Random playback
3Search playback
Canceling random, repeat and scan
play
Select “RPT” , “RAND” or “SCAN” again.
INFORMATION
To operate from the front audio sys-
tem, see “— DVD player operation”
on page 187.
— Using the DVD player
(audio CD/CD text)

AUDIO/VIDEO SYSTEM
235

Using the control screen
Push or to display the control
screen.
1Repeat play
2Random playback
3Search playback
4Displaying file information
5Selecting folder
INFORMATION
To operate from the front audio sys-
tem, see “— DVD player operation”
on page 187.
Repeat play
Repeat a file
Select “RPT” .
Repeat all of files in a folder
Select “RPT”, and push and hold “ENT”.
Random playback
Playing files from a particular folder in
random order
Select “RAND” .
Playing all of the files on a disc in ran-
dom order
Select “RAND” , and push and hold
“ENT” .
Search playback
Selecting the desired file by cueing the
files in the folder
Select “SCAN” .
The player will scan all the files in the fold-
er. Each file will be played for 10 seconds.
Selecting the desired file by cueing
the folders on the disc
Select “SCAN” , and push and hold
“ENT” . The player will scan all the folders
on the disc. The first file in each folder will
be played for 10 seconds.
Canceling random, repeat and play
back
Select “PRT” , “RAND” or “SCAN” again.
— Using the DVD player
(MP3 discs)

AUDIO/VIDEO SYSTEM
236
Push “VIDEO” to select the video mode.
Before switching to the video mode, con-
nect the audio source to the A/V input port.
Using the port
Open the cover.
The A/V input port is composed of 3 input
ports.
Yellow: Image input port
White: Left channel audio input port
Red: Right channel audio input port
The rear seat entertainment system plays
videos and sound when audio −video
equipment is connected to the A/V input
port. For details, refer to the manufactur-
er’s instructions.
The power outlet is used to connect the au-
dio device. See the vehicle owner’s manu-
al.
NOTICE
When the A/V input port is not in use,
keep the A/V input port cover closed.
Inserting anything other than an ap-
propriate plug may cause electrical
failure or a short circuit.
— Using the video mode

AUDIO/VIDEO SYSTEM
237
Push or select “Set Up” to dis-
play the initial setting screen.
The following initialization can be
changed here.
“Audio Language”
“Subtitle Language”
“DVD Language”
“Angle Mark”
“Parental Lock”
Changing the audio language
Select “Audio Language”. Select the
language you want to hear, and push
“ENT” to input it.
Select “Others” if you cannot find the
language you want to hear. Enter the
appropriate 4digit language code. Se-
lect a number, and push “ENT” to input
it.
Language code list
If a code that is not in the list is entered, “In-
correct Code” will appear on the screen.
(See page 204.)
— Changing the initial
setting

AUDIO/VIDEO SYSTEM
238

Changing the subtitle language
Select “Subtitle Language”. Select the
language you want to read, and push
“ENT” to input it.
Select “Others” if you cannot find the
language you want to read. Enter the
appropriate
4digit language code. Se-
lect a number, and push “ENT” to input
it.
Language code list
If a code that is not in the list is entered, “In-
correct Code” will appear on the screen.
(See page 204.)
Changing the DVD language
Select “DVD Language”. Select the lan-
guage you want to read and push
“ENT” to input it.
Select “Others” if you cannot find the
language you want to read. Enter the
appropriate 4digit language code. Se-
lect a number, and push “ENT” to input
it.
Language code list
If a code that is not in the list is entered, “In-
correct Code” will appear on the screen.
(See page 204.)

AUDIO/VIDEO SYSTEM
239

Turning on or off the angle mark
The angle mark can be turned on for
discs that are multiangle compatible.
Each time you push “ENT” when “Angle
Mark” is selected, the angle mark turns on
or off alternately.Setting viewer restriction levels
Setting a password allows the viewer
restriction to be effective.
Select “Parental Lock”. Enter the pass-
word and push “ENT”. The setting can-
not be changed unless the password is
entered.
When you forget the password, initialize
the password. (See page 240.)
Select a restriction level (18), and
push “ENT”. The smaller the level num-
ber, the stricter the age limit.

AUDIO/VIDEO SYSTEM
240

Setting the display mode
Pushing changes the display
modes sequentially as follows:
Normal → Wide 1 →Wide 2
Returning to the previous screen
Select “BACK” , and push “ENT” .
To initialize the password
Push  on the remote controller or unit ten
times when the screen to enter the person-
al code is displayed.
Adjusting the screen
Push .
Select the brightness, contrast, tone or col-
or, and make adjustments. Push
or
“ENT” to input it.
Brightness, contrast, tone and color
adjustment
“Brightness” “+”:
Brightens the screen.
“Brightness” “”:
Darkens the screen.
“Contrast” “+”:
Strengthens the contrast of the screen.
“Contrast” “”:
Weakens the contrast of the screen.
“Tone” “+”: Strengthens the tone of the
screen.
“Tone” “”: Weakens the tone of the
screen.
“Color” “Red”:
Strengthens the red color of the screen.
“Color” “Green”:
Strengthens the green color of the screen.