maintenance reset TOYOTA HIGHLANDER HYBRID 2018 Owners Manual (in English)

1102. Instrument cluster
HIGHLANDER_HV_U (OM0E032U)
Select using the meter control switches.
Select an item and then set it with the center button.
■LDA (Lane Departure Alert with steering control) settings
→P. 6 6 9
■PCS (Pre-Collision System) settings
→P. 6 6 9
■BSM (Blind Spot Monitor) settings (if equipped)
Select to activate/deactivate the BSM (Blind Spot Monitor).
(
→P. 669)
■Meter settings
● Language
Select to change the language on the display.
● Units
Select to change the unit of measure for fuel consumption.
● Maintenance system (for U.S.A)
Select to reset the maintenance data after the required mainte-
nance is performed. (
→P. 498)
● EV Indicator Light
Select to activate/deactiva te the EV Indicator Light.
● switch settings
You can register 1 screen as the top screen. To register, press
and hold while the desired screen is displayed.
● Drive information 1 through 3
Select to select up to 2 items t hat will be displayed on a Drive
information screen, up to 3 Drive information screens can be set.
● Pop-up display
Select to set the following pop-up displays, which may appear in
some situations, on/off.
• Route guidance display of t he navigation system-linked sys-
tem (if equipped)
• Incoming call display of the hands-free phone system
• Instrument panel brightness adjustment display
Settings display
1
2

4987-2. Maintenance
HIGHLANDER_HV_U (OM0E032U)
■Repair and replacement
It is recommended that genuine Toyota parts be used for repairs to ensure
performance of each system. If non-Toyota parts are used in replacement or if
a repair shop other than a Toyota dealer performs repairs, confirm the war-
ranty coverage.
■ Resetting the message indicating maintenance is required (U.S.A. only)
After the required maintenance is performed according to the maintenance
schedule, please reset the message.
To reset the message, follow the procedure described below:
Using the trip meter
Turn the power switch off with the trip meter A reading shown.
While pressing the trip meter reset button ( →P. 104), turn the power switch
to the ON mode (do not start the hybrid system because otherwise the
reset mode will be canceled).
Continue to press and hold the button until the trip meter displays “000000”.
Using the multi-information display
While the hybrid system operating, switch the multi-information display to
. (→P. 110)
Select “Maintenance System” on
of the multi-information display.
Select “Yes” on the “Maintenance System” screen.
“Initialization Completed” will be displayed on the multi-information display
when the reset procedure has been completed.
■ Allow inspection and repairs to be performed by a Toyota dealer
●Toyota technicians are well-trained specialists and are kept up to date with
the latest service information. They are well informed about the operations
of all systems on your vehicle.
● Keep a copy of the repair order. It proves that the maintenance that has
been performed is under warranty cove rage. If any problem should arise
while your vehicle is under warranty, your Toyota dealer will promptly take
care of it.
1
2
3
1
2
3

5257-3. Do-it-yourself maintenance
7
Maintenance and care
HIGHLANDER_HV_U (OM0E032U)■
How to initialize the tire pressure warning system
Park the vehicle in a safe place and turn the power switch to off.
Initialization cannot be performed while the vehicle is moving.
Adjust the tire inflation pressure to the specified cold tire inflation
pressure level. ( →P. 646)
Make sure to adjust the tire pressu re to the specified cold tire infla-
tion pressure level. The tire pressure warning system will operate
based on this pressure level.
Turn the power switch to the ON mode.
Press and hold the tire pres-
sure warning reset switch
until the tire pressure warn-
ing light blinks slowly 3 times.
Wait for a few minutes with the power switch in ON mode and
then turn the power switch off.
1
2
3
4
5

5297-3. Do-it-yourself maintenance
7
Maintenance and care
HIGHLANDER_HV_U (OM0E032U)■
The initialization operation
●Make sure to carry out in
itialization after adjusting the tire inflation pres-
sure.
Also, make sure the tires are cold be fore carrying out initialization or tire
inflation pressure adjustment.
●If you have accidentally turned the power switch to off during initializa-
tion, it is not necessary to press th e reset switch again as initialization
will restart automatically wh en the power switch has been turned to the
ON mode for the next time.
●If you accidentally press the reset s witch when initialization is not neces-
sary, adjust the tire inflation pressu re to the specified level when the
tires are cold, and conduct initialization again.
■When initialization of the tire pr essure warning system has failed
Initialization can be completed in a few minutes. However, in the following
cases, the settings have not been recorded and the system will not oper-
ate properly. If repeated attempts to record tire inflation pressure settings
are unsuccessful, have the vehicle inspected by your Toyota dealer.
●When operating the tire pressure wa rning reset switch, the tire pressure
warning light does not blink 3 times.
●After carrying out the initialization procedure, the tire pressure warning
light blinks for 1 minute then stays on after driving for 20 minutes.

5307-3. Do-it-yourself maintenance
HIGHLANDER_HV_U (OM0E032U)■
Tire pressure warning system certification
FCC ID: PAXPMVC010
NOTE:
This device complies with part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC WARNING:
Changes or modifications not expressl y approved by the party responsi-
ble for compliance could void the user ’s authority to operate the equip-
ment.
NOTE:
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
NOTE:
L’utilisation de ce dispositif est au torisée seulement aux deux conditions
suivantes : (1) il ne doit pas produire de brouillage, et (2) l’utilisateur du
dispositif doit être pr êt à accepter tout brouillage radioé lectrique reçu,
même si ce brouillage est susceptible de comp romettre le fonctionne-
ment du dispositif.
WARNING
■When inspecting or replacing tires
Observe the following precautions to prevent accidents.
Failure to do so may cause damage to parts of the drive train as well as
dangerous handling characteristics, which may lead to an accident
resulting in death or serious injury.
●Do not mix tires of different makes, models or tread patterns.
Also, do not mix tires of remarkably different treadwear.
●Do not use tire sizes other than those recommended by Toyota.
●Do not mix differently constructed ti res (radial, bias-belted or bias-ply
tires).
●Do not mix summer, all season and snow tires.
●Vehicles with a compact spare tire: Do not tow if your vehicle has a
compact spare tire installed.
■When initializing the tire pressure warning system
Do not operate the tire pressure warning reset switch without first
adjusting the tire inflation pressure to the specified level. Otherwise, the
tire pressure warning light may not come on even if the tire inflation
pressure is low, or it may come on when the tire inflation pressure is
actually normal.

5868-2. Steps to take in an emergency
HIGHLANDER_HV_U (OM0E032U)
Indicates that the accelerator and brake pedal
are being depressed simultaneously
→Release the accelerator or brake pedal.
Indicates that the washer fluid level is low
→Add washer fluid.
Indicates that remaining fuel is approximately 2.6
gal. (9.7 L, 2.1 Imp. gal.) or less
→Refuel the vehicle.
Indicates that the TRAC (Traction Control) sys-
tem has been deactivated
→Turn the TRAC on. ( →P. 331)
(U.S.A. only)
Indicates that all maintenance according to the
driven distance on the maintenance schedule
*1
should be performed soon.
Comes on approximately 4500 miles (7200 km)
after the message has been reset.
→If necessary, perform maintenance.
(U.S.A. only)
Indicates that all maintenance is required to cor-
respond to the driven distance on the mainte-
nance schedule
*1.
Comes on approximately 5000 miles (8000 km)
after the message has been reset.
(The indicator will not work properly unless the
message has been reset.)
→ Perform the necessary maintenance.
Please reset the message after the mainte-
nance is performed. ( →P. 498)
Indicates that the Automatic High Beam switch is
pressed while the headlights are in low beam.
→Turn the high beam on and press the Auto-
matic High Beam switch again.
Warning messageDetails/Actions
(Flashes)

6679-2. Customization
9
Vehicle specifications
HIGHLANDER_HV_U (OM0E032U)
Some function settings are changed simultaneously with other func-
tions being customized. Contact your Toyota dealer for further details.
Settings that can be changed on the audio system screen
Settings that can be changed by the meter control switches
Settings that can be changed by your Toyota dealer
Definition of symbols: O = Av ailable, — = Not available
■Gauges, meters and multi-information display
( → P. 103, 107)
Customizable features
1
2
3
Function*1Default settingCustomized set-
ting
Language*2EnglishFrenchOO—Spanish
Units*2miles (MPG US)
km (km/L)
OO—km (L/100 km)
miles (MPG
Imperial)
Maintenance system ini-
tialization
*3OffOn—O—
EV indicatorOn
(Self-lighting)Off—O—
switch settingsDrive
information 1Desired status screen
*4—O—
Drive information 1
Current fuel con- sumption
*5—O—Average fuel
economy (after reset)
Drive information 2
Distance (driving range)
*5—O—Average fuel
economy (after
refueling)
123

711Alphabetical index
HIGHLANDER_HV_U (OM0E032U)
Rear view mirrorInside rear view mirror .......... 173
Outside rear view mirrors...... 175
Rear view monitor system ...... 304
Rear window defogger ............ 436
Rear window wiper .................. 254
Refueling .................................. 256 Capacity ................................ 641
Fuel types ............................. 641
If the fuel filler door cannot be opened............... 259
Opening the fuel tank cap ..... 258
Replacing Electronic key battery ........... 539
Fuses .................................... 541
Light bulbs ............................ 545
Tires ...................................... 596
Reporting safety defects for U.S. owners ...................... 680
Resetting the message
indicating maintenance is
required .................................. 498
Road accident cautions ............ 89
Roof rails .................................. 205 Safety Connect ........................ 479
Seat belt reminder light .......... 568
Seat belts ................................... 32
Adjusting the seat belt ............ 35
Automatic Locking Retractor .............................. 36
Child restra int system
installation ............................ 70
Cleaning and maintaining the seat belt........................ 495
Emergency Locking
Retractor .............................. 36
How to wear your seat belt ..... 30
How your child should wear the seat belt.......................... 37
Pregnant women, proper seat belt use ......................... 38
Reminder light and buzzer.... 568
Seat belt extender .................. 37
Seat belt pretensioners........... 36
SRS warning light ................. 567
Seat heaters ............................. 445
Seat position memory ............. 163
Seat ventilators........................ 445
Seating capacity ...................... 207
Seats ................................. 154, 156 Adjustment.................... 154, 156
Adjustment
precautions................. 155, 162
Child seats/child restraint
system installation ................ 66
Cleaning ............................... 495
Driving position memory ....... 163
Head restraints ..................... 167
Properly sitting in the seat ...... 30
Seat heaters ......................... 445
Seat position memory ........... 163
Seat ventilators ..................... 445S
*: Refer to “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL”

713Alphabetical index
HIGHLANDER_HV_U (OM0E032U)
Heated steering wheel switch ................................. 445
Ignition switch ....................... 225
Intuitive parking assist
*
LDA (Lane Departure Alert with steering control)
switch ................................. 285
Light switches ....................... 241
Meter control switches .......... 108
Moon roof switches ............... 181
Outside rear view mirror
switches.............................. 175
Panoramic moon roof switches.............................. 185
Power back door main switch ................................. 133
Power back door opener
and closer switch ................ 130
Power door lock switch ......... 126
Power switch......................... 225
Power window switches ........ 177
Rear window and outside rear view mirror
defoggers switch ................ 436
Rear window wiper and washer switch ..................... 254
Seat heater switches ............ 445
Seat ventilator switches ........ 445
“SOS” button ......................... 479
Steering wheel switch ........... 108
Talk switch
*.......................... 427
Telephone switches
*............ 408
Tire pressure warning reset
switch ................................. 525
Vehicle-to-vehicle distance switch ................................. 292
VSC OFF switch ................... 330
Window lock switch............... 178
Windshield wiper and washer switch .............. 250 Tail lights.................................. 241
Light switch ........................... 241
Replacing light bulbs ............ 545
Talk switch
*............................. 427
Telephone switches
*.............. 408
Theft deterrent system Alarm ...................................... 93
Immobilizer system .. ............... 91
Tire inflation pressure............. 532 Maintenance data ................. 646
Warning light......................... 569
Tire information ....................... 653 Glossary ............................... 660
Size....................................... 656
Tire identification number ..... 655
Uniform Tire Quality Grading .............................. 658
Tire pressure warning system.................................... 524 Function ................................ 524
Initializing .............................. 524
Installing tire pressure warning valves
and transmitters ................. 524
Registering ID codes ............ 526
Tire pressure warning reset switch ................................. 525
Warning light......................... 569
T
*: Refer to “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL”