turn signal TOYOTA LAND CRUISER 2003 J100 Navigation Manual

MAP/VOICE buttonTouch this button to
repeat voice guidance,
cancel one touch scroll
and start guidance. For
details, see page 34.
DEST button
Push this button to
display the Destination
screen. For details, see
page 4.
MENU button
Push this button to display the Menu
screen. This screen allows you to make
adjustments or correct settings of various
options and functions.
DISPLAY button
Push this button to
display the Display
screen. For details, see
page 103.
INFO button
Push this button to
display the Information menu screen. For
details, see page 88. GPS (Global
Positioning System)
mark
Whenever your vehicle
is receiving signals
from the GPS, this
mark is displayed. For
details, see page 50.
Map/Guidance
Touch this switch to
change the screen
mode. For details, see
page 28.
Current vehicle
position mark
Indicates the current
position. For details,
see page 34.
Current street name
Turn on this function
to indicate the current
street name. For
details, see page 87.
Northup or Headingup symbol and Scale of map
Indicates a map view with north up or heading up.
Touching this symbol changes the map orientation. The
figure also indicates the map scale. For details, see
page 49.
Distance and time to destination
Displays the distance and the estimated travel time to the
destination. If you input more than two destinations, it displays
the distance and time to the next destination. Touching this
indication will change it to the distance and time to the other
destinations. The direction will be indicated when your vehicle
is off the route.
viii
2003 Land Cruiser 100 Navigation (OM60A00U)
Symbols, Switches and Buttons

34
2003 Land Cruiser 100 Navigation (OM60A00U)
1UE058
Touch the “Edit” switch, the Edit route
preview screen appears.
To next POI: Preview the Next POI
To next
: Preview the Next destination
Delete: To delete the POI icon.
Select POI: To select the POI icon.
Touch the
“OK” switch after the selection.
1UE059
The current vehicle position mark ap-
pears in the center of the Map screen. You
can return to this map screen showing
your current position at any time from
any screen by pushing the
“MAP/
VOICE”
button.
During driving, the current vehicle position
mark is fixed in the center of the screen and
the map moves.
If you move the map with a “one −touch”
scroll (see page 48 for details), the current
vehicle position mark continues to track your
current location.
INFORMATION
When you use the “onetouch” scroll
feature, the current vehicle position
mark may disappear from the screen.
Move the map with a “onetouch”
scroll again or push the
“MAP/
VOICE” button to return to the current
vehicle position map location display.
The current position is automatically set
as your vehicle receives signals from the
GPS (Global Positioning System). If your
current position is not correct, it is auto-
matically corrected after your vehicle re-
ceives signals from the GPS.
INFORMATION
After the battery disconnection, or on a
new vehicle, the current position may
not be correct. As soon as the system
receives signals from the GPS, the cor-
rect current position is displayed.
If you must correct the current position
manually, follow the steps on page 79.
Current position display

120
2003 Land Cruiser 100 Navigation (OM60A00U)
UNG608
BASS ”+” or ””: Adjusts low−pitched
tones.
MID ”+” or ””: Adjusts mid −pitched tones.
TREB ”+” or ””: Adjusts high−pitched
tones.
”Front” or ”Rear”: Adjusts sound balance
between the front and rear speakers.
”L” or ”R”: Adjusts sound balance between
the left and right speakers.
”OK”: The previous screen returns. The antenna automatically extends when
the radio is on or the radio RDS system is on,
and retracts when the radio mode is off.
I17003
To adjust the height of the antenna manu-
ally, push the switch.
Clean the antenna mast periodically with a
clean dry cloth.
CAUTION
Before extending the antenna,
confirm
that no one is close enough to get
injured.
NOTICE
 To prevent damage to the antenna,
make sure it is retracted before
driving your vehicle through an
automatic car wash.
 Antenna mast have to be extended
higher than 100 mm (3.94 in) length
when the audio is on. Extend the an-
tenna mast when the radio signal is
weak.
(d) Your radio antenna

122
2003 Land Cruiser 100 Navigation (OM60A00U)
UNG610
Push these buttons to choose either an
AM or FM station.
”AM”, ”FM1”, ”FM2” or ”FM TYPE” appears
on the display.
Turn this knob to step up the station band
or to step down.
Your radio automatically changes to stereo
reception when a stereo broadcast is re-
ceived. ”ST” appears on the display. If the
signal becomes weak, the radio reduces the
amount of channel separation to prevent the
weak signal from creating noise. If the signal
becomes extremely weak, the radio
switches from stereo to mono reception. In
this case, ”ST” disappears from the display.
UNG604
1. Tune in the desired station.
2. Touch one of the station selector
switches (16) and hold it until a beep is
heard. This sets the station to the switch
and the frequency appears on the switch.
Each switch can store FM1, FM2 and AM. To
change the preset station to a different one,
follow the same procedure.
The preset station memory is cancelled
when the power source is interrupted by bat-
tery disconnection or a blown fuse.
Radio operation
(a) Listening to the radio(b) Presetting a station