key TOYOTA LAND CRUISER 2007 J200 Navigation Manual

viiiTo search for a destination, the switches
below perform the following operations.
1“Address” switch
You can input the house number and the
street address by using the input keys.
xxxiii . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2“POI Name” switch
You can select one of the many POIs (Points
of Interest) that have already been stored in
the system’s database. xxxvi. . . . . . . . . . . .
3“POI Category” switch
You can select a destination from the POI
category. xl. . . . . . . . . . . . . . . . . . . . . . . . . . .
4“Previous” switch
You can select a destination from any of the
last 99 previously set destinations and from
the previous starting point. xliv. . . . . . . . . .
5“Memory” switch
You can select the location from those regis-
tered as “Memory points”. (To register
memory points, see page lxxvii.) xliv. . . . .
6“Emergency” switch
You can select one of the three categories of
emergency service points that have been al-
ready stored in the system’s database.
xliii . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
— “Destination” screen

ii
Touch switch operation
This system is operated mainly by the
switches on the screen. To prevent dam-
age to the screen, lightly touch switches
on the screen with your finger. When you
touch a switch on the screen, a beep
sounds.Do not use objects other than your finger
to touch the screen.
INFORMATION
If the system does not respond to a
touch of a switch, move your finger
away from the screen and then
touch it again.
You cannot operate dimmed
switches.
Wipe off fingerprints on the surface
of the display using a glass cleaning
cloth.
The displayed image may become
darker and moving images may be
slightly distorted when the display is
cold.
When you look at the screen through
polarised material such as polarised
sunglasses, the screen may be dark
and hard to see. If so, change the
angle of the screen or take off your
sunglasses.
Inputting letters and numbers
When searching for an address or a name,
or entering a memo, you can input letters
and numbers via the touch screen.
To input letters
To display the alphabet keys, touch the
“AZ” switch or the “ÀÝ” switch.
Enter letters by touching the alphabet keys
directly.
:Touching this switch erases one
letter. Holding this switch will con-
tinue to erase letters.

iii
To input numerals and symbols
To display the number keys and symbol
keys, touch the
“09” switch.
Enter numerals and symbols by touching the
number keys and symbol keys directly.
:Touching this switch erases one
letter. Holding this switch will con-
tinue to erase letters.
:Touching this switch displays other
symbols.
To display the list
To search for an address or a name, touch
the “List” switch. Matching items from the
database are listed even if the entered ad-
dress or name is incomplete.
If the number of matches is four or less, the
list is displayed without touching the
“List”
switch.
INFORMATION
The number of matching items is
shown to the right side of the screen.
If the number of matching items is
more than 9,999, the system displays
“
∗∗∗∗” on the screen.

lxxxii
To delete an attribute, touch the “Yes”
switch. To return to the previous screen,
touch the “No” or “Back” switch.
To change “Name”
Touch the alphabet and/or numeral keys.
When the entry has been completed, touch
the
“OK” switch on the screen.
The previous screen will be displayed.
“Show Name”
You can set the name of a memory point
to be displayed or not on the map.
To show the name, touch the
“On”
switch. Not to show it, touch the “Off”switch.
To change “Location”
Touch the eight direction switch to move
the cursor to the desired point on the
map.
Touch the
“Enter” switch and the previous
screen will be displayed.

lxxxiii
To change “Phone #” (telephone
number)
Touch numeral keys.
When the entry has been completed, touch
the
“OK” switch on the screen.
The previous screen will be displayed.
(c) Deleting memory points
1. Push the “MENU” button to display
the “Menu” screen and touch the
“My
Places”
switch.
2. Touch the “Delete” switch of the
“Memory Points”.
3. Touch the corresponding switch. To
delete all memory points, touch the
“De-
lete All” switch.
For efficient memory point search, memory
points can be sorted by the
“Date”,
“Icon”, “Name” or “Attribute”
switch.
To delete, touch the
“Yes” switch. To can-
cel the deletion, touch the “No” switch.

lxxxvi
To change “Name”
Touch alphabet or numeral keys.
When the entry has been completed, touch
the
“OK” switch on the screen.
The previous screen will be displayed.
“Show Name”
The avoid area name can be set to be dis-
played or not on the map. To show the
name, touch the
“On” switch. Not to
show it, touch the
“Off” switch.
To change “Location”
Set the cursor to the desired location,
then touch the
“Enter” switch. The pre-
vious screen will be displayed.
To change “Area size”
Touch either or switch to change
the size of area you want to avoid, and touch
the
“OK” switch. The previous screen will
be displayed.

cviii
Maintenance information
This system informs you when to replace
certain parts or components and shows
dealer information (if registered) on the
screen. (See “Information items” on
page cix.) When the navigation system
begins operating after either the informa-
tion item’s preset data arrives or the
driving distance reaches a predeter-
mined setting, the “Information” screen
will be displayed. This screen will appear
every time the system is turned on until
you touch the
“Do not display this
message again”
switch.
To prevent this information screen from be-
ing displayed again, touch the
“Do not
display this message again”
switch.1. Push the
“INFO” button to display
the “Information Menu” screen and
touch the
“Maintenance” switch.
5u004
2. Touch the desired icon and input the
conditions.
Notice of “Date”: You can input the next
maintenance date.
Notice of “Distance”: You can input the
driving distance until the next maintenance
check.
When you touch the
switch on the
“Maintenance” screen, the screen changes
to the “Personal Event” screen. Touch the
keys to input the desired name and then in-
put conditions.
After you input the date and/or distance,
touch the
“OK” switch. The screen then
returns to the “Maintenance” screen.
The following switches appear.
“Delete All”: To cancel all conditions which
have been inputted.

cxi
(b) Edit dealer
You can edit the dealer name, staff, loca-
tion and phone number.
1. Touch the
“Set Dealer” switch on
the “Maintenance” screen. The “Edit
Dealer” screen appears.
2. To edit, touch the corresponding
switch.
To edit “Dealer” or “Contact”
To input the name, touch the alphabet,
numeral and/or umlaut keys. You can in-
put up to 24 letters.
After inputting, touch the
“OK” switch at
the bottom right of the screen. The previous
screen will be displayed.

cxii
To edit “Location”
Set the cursor to the desired point,
and touch the
“Enter” switch on the
screen.
To edit “Phone #” (telephone number)
Touch numeral keys.
After inputting, touch the
“OK” switch. The
previous screen will be displayed.
(c) Delete dealer
1. Touch the “Delete Dealer” switch
on the screen.
2. A message will appear on the screen.
To delete, touch the
“Yes” switch. To
cancel the deletion, touch the
“No” or
“Back” switch.

cxv
Enter text using the keys. You can enter
text up to 24 letters.
After entering the text, touch the
“OK”
switch at the bottom right of the screen.
Location
Touch the “Location” switch to set
location.
A screen similar to the destination input
screen appears. Input the same way as
inputting a destination. (See page xxx.)
You can add the memos up to 100 until
December 31, 2022.
The date inputted is marked as shown
above.
You can choose the desired mark and/or
date color.