manual radio set TOYOTA LAND CRUISER 2007 J200 Navigation Manual

clxi
(b) Presetting a station
lxb001a
1. Tune in the desired station.
2. Touch one of the station selector
switches (16) and hold it until a beep is
heard. This sets the station to the switch
and the frequency appears on the switch.
Each switch can store FM1, FM2 and AM.
To change the preset station to a different
one, follow the same procedure.
The preset station memory is cancelled
when the power source is interrupted by bat-
tery disconnection or a blown fuse.
(c) Selecting a station
Your Toyota has an electronic tuning radio
(ETR). Tune in the desired station using one
of the following methods.
Preset tuning: Touch the switch (1−6) or
push the “
” or “” side of the “CH” button
for the station you want. The switch (1−6) is
highlighted in green and station frequency
appears on the display.
Manual tuning: Turn the “TUNE” knob brief-
ly. Each time you turn the knob, the radio will
step up or down to another frequency.
Seek tuning: Push the “
” or “” side of
the “SEEK” button and hold it until you hear
a beep. The radio will begin seeking up or
down for a station of the nearest frequency
and will stop on reception. Each time you
push the button, the stations will be
searched out one after another.
lxb001a
Scan tuning:Touch the “SCAN” switch
briefly. “SCAN” appears on the display. The
radio will find the next station up or down the
band, stay there for a few seconds, and then
scan again. To select a station, touch the
“SCAN” switch a second time.
Preset scan tuning: Touch the “SCAN”
switch and hold it until you hear a beep. “P.
SCAN” appears on the display. The radio
will tune in the next preset station up or down
the band, stay there for a few seconds, and
then move to the next preset station. To se-
lect a station, touch the “SCAN” switch a se-
cond time.

clxvi
(e) Selecting a channel
Tune in the desired channel using one of the
following methods.
Preset tuning: Touch the switch (1−6) or
push the “
” or “” button of the “CH” but-
ton for the channel you want. The switch
(1−6) is highlighted in green.
Manual tuning within the channel catego-
ry: Turn the “TUNE” knob. The radio will
step up or down the channel.
Manual tuning within the current channel
category: Push the “SEEK” button. The ra-
dio will step up or down the channel within
the current channel category. Touch the
“TYPE SEEK” switch. The radio will step up
the channel within the current channel cate-
gory.lc022
To scan the currently selected channel
category: Touch the “TYPE SCAN” switch
or push the “SCAN” button briefly. “SCAN”
appears on the display. The radio will find
the next channel in the same channel cate-
gory, stay there for a few seconds, and then
scan again. To select a channel, push the
“SCAN” button a second time.
To scan the preset channels: Touch the
“TYPE SCAN” switch or push the “SCAN”
button and hold it until you hear a beep.
“P.SCAN” appears on the display. The radio
will find the next preset channel, stay there
for a few seconds, and then move to the next
preset channel. To select a channel, push
the “SCAN” button a second time.
(f) Channel category
lc023
Touch either “” or “” switch to switch to the
next or previous category.
VI