TOYOTA LAND CRUISER 2013 J200 Owners Manual

691 6-1. Specifications
6
Vehicle specifications
LC200_OM_OM60F57U_(U)
*:Table 1  Occupant loading and distribution for vehicle normal load
for various designated seating capacities
Designated seating
capacity, Number of
occupantsVehicle normal load,
Number of occupantsOccupant distribution in
a normally loaded
vehicle
2 through 4 2 2 in front
5 through 10 32 in front, 1 in second
seat
11 through 15 52 in front, 1 in second
seat, 1 in third seat, 1
in fourth seat
16 through 20 72 in front, 2 in second
seat, 2 in third seat, 1
in fourth seat

692
LC200_OM_OM60F57U_(U)
6-2. Customization
Customizable features
Customizing vehicle features using the touch screen (vehicles
with navigation system)
Press “SETUP”.
Touch “Vehicle” on the “Setup” screen.
Touch “Vehicle Customization”.
Touch the setting to be changed.
Change each setting and touch
“Save”.
If “Save” is not touched before
switching to another screen, any
changes will be lost.
A message indicating that the settings are being saved will
appear.
Do not perform any other operations while this message is
displayed.
Your vehicle includes a variety of electronic features that can be per-
sonalized to your preferences.
Programming of these preferences can be performed by your Toyota
dealer.
For vehicles with the navigation system, it is also possible to cus-
tomize certain vehicle features yourself using the touch screen.
Some function settings are changed simultaneously with other functions
being customized. Contact your Toyota dealer for further details.
STEP1
STEP2
STEP3
STEP4
STEP5

693 6-2. Customization
6
Vehicle specifications
LC200_OM_OM60F57U_(U)
Customizable features
Vehicle customization settings can be changed at your Toyota dealer.
For vehicles with the navigation system, some settings can be
changed using the touch screen.
Settings that can be changed using the touch screen
Settings that can be changed using the vehicle switches
Settings that can be changed by your Toyota dealer
Definition of symbols: O= Available, — = Not available
ItemFunctionDefault
settingCustomized
setting
Smart key
system
(P. 32)Smart key
systemOn Off O — O
Smart door
unlockingDriver’s door All the doors O O O

694 6-2. Customization
LC200_OM_OM60F57U_(U)
Wireless
remote
control
(P. 44)Wireless remote
controlOn Off — — O
Open door warn-
ing function
(when locking the
vehicle)On Off — — O
Unlocking opera-
tionDriver’s door
unlocked in
one step, all
doors
unlocked in
two stepsAll doors
unlocked in
one stepO—O
Smart key
system
(P. 32)
and
wireless
remote
control
(P. 44) Operation signal
(Emergency
flashers)On Off O — O
Time elapsed
before automatic
door lock function
is activated if
door is not
opened after
being unlocked60 secondsOff
O—O 30 seconds
120 seconds
Adjust the vol-
ume of confirma-
tion buzzer
sounds when the
vehicle is locked
or unlocked7Off
O—O
1 to 6
ItemFunctionDefault
settingCustomized
setting

695 6-2. Customization
6
Vehicle specifications
LC200_OM_OM60F57U_(U)
Door lock
(P. 46)Unlocking using a
mechanical keyDriver’s door
unlocked in
one step, all
doors
unlocked in
two stepsAll doors
unlocked in
one stepO—O
Speed-detecting
automatic door
lock functionOff On O O O
Shifting the shift
lever to position
other than “P”
locks all doorsOn Off O O O
Shifting the shift
lever to “P”
unlocks all doorsOn Off O O O
Opening driver’s
door unlocks all
doorsOff On O O O
Power
windows
(P. 93)Mechanical key
linked operation
(close)Off On — — O
Mechanical key
linked operation
(open)Off On — — O
Wireless remote
control linked
operation (open)Off On — — O
Linked entry
functionOff On — — O
ItemFunctionDefault
settingCustomized
setting

696 6-2. Customization
LC200_OM_OM60F57U_(U)
Moon roof
(P. 97)Mechanical key
linked operation
(open)
*1Off On — — O
Mechanical key
linked operation
(close)
*1Off On — — O
Linked operation
of components
when door key is
usedSlide only Tilt only — — O
Wireless remote
control linked
operation
(open)
*2
Off On — — O
Linked operation
of components
when wireless
remote control
usedSlide only Tilt only — — O
Linked entry
function
*3Off On — — O
ItemFunctionDefault
settingCustomized
setting

697 6-2. Customization
6
Vehicle specifications
LC200_OM_OM60F57U_(U)
ItemFunctionDefault
settingCustomized
setting
Illumination
(P. 462)Time period
before the interior
lights turn off15 secondsOff
O—O 7.5 seconds
30 seconds
Operation after
the “ENGINE
START STOP”
switch is turned
offOn Off — — O
Operation when
the doors are
unlockedOn Off — — O
Operation when
you approach the
vehicle with the
electronic key on
your person
(When the inte-
rior light switch is
door position)On Off — — O
Sensitivity of the
ambient light sen-
sor used for dim-
ming the meter
lights etc.Standard -2 to 2 — — O
Sensitivity of the
ambient light sen-
sor used for
brightening the
meter lights etc.Standard -2 to 2 — — O

698 6-2. Customization
LC200_OM_OM60F57U_(U)
Automatic
light control
system
(P. 196)Light sensor sen-
sitivityStandard -2 to 2 O — O
Daytime running
light systemOn Off O — O
Time elapsed
before head-
lights automati-
cally turn off after
doors are closed30 secondsOff
O—O 60 seconds
90 seconds
Intuitive
parking
assist
(P. 229)Detection dis-
tance of the rear
center sensorFar Near O — O
Alert Volume
(alert volume can
be adjusted)3 1 to 5 O — O
Display setting
(when intuitive
parking assist is
operating)All sensors
displayedDisplay off O — O
Automatic
air
conditioning
system
(P. 336)A/C Auto switch
operationAuto Manual O — O
Eco Driving
Indicator
Light
(P. 156)Eco Driving
Indicator LightOn Off — O O
ItemFunctionDefault
settingCustomized
setting

699 6-2. Customization
6
Vehicle specifications
LC200_OM_OM60F57U_(U)
*1: The settings can be changed when the mechanical key linked operation of
the power window is set to ON.
*2: The settings can be changed when the wireless remote control linked oper-
ation of the power window is set to ON.
*3: The settings can be changed when the entry function linked operation of the
power window is set to ON.
■Vehicle customization
●If the smart key system is turned “OFF”, unlock door cannot be selected.
●If the doors are not opened after unlocking and are then automatically re-
locked, a signal will be given if “Operation signal (Emergency flashers)”
or “Operation signal (Buzzer)” are set to ON.
■When setting using the vehicle switches (vehicles with navigation sys-
tem)
When using the vehicle switches to set an item that can also be set using the
touch screen, the item displayed on the touch screen will not change imme-
diately.
If the “ENGINE START STOP” switch is first turned to OFF, the screen dis-
play will change once the “ENGINE START STOP” switch is turned to IGNI-
TION ON mode again.
■When customizing using the touch screen (vehicles with navigation
system)
Stop the vehicle in a safe place, apply the parking brake, and shift the shift
lever to “P”. Also, to prevent battery discharge, leave the engine running
while customizing the features.

700 6-2. Customization
LC200_OM_OM60F57U_(U)
Multi-information display (P. 189)
CAUTION
■During customization
As the engine needs to be running during customization, ensure that the
vehicle is parked in a place with adequate ventilation. In a closed area such
as a garage, exhaust gases including harmful carbon monoxide (CO) may
collect and enter the vehicle. This may lead to death or a serious health haz-
ard.
NOTICE
■During customization
To prevent battery discharge, ensure that the engine is running while cus-
tomizing features.
Available languagesEnglish (U.S.A.), Spanish