brake TOYOTA MIRAI 2016 1.G Quick Reference Guide

1
OVERVIEWHYDROGEN FUEL CELL SYSTEM
& SAFETY FEATURESFEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
INDEX
1 Visit your Toyota dealer for information on customizing this feature.2 Programmable by customer. Refer to the Owner’s Manual for instructions and more
information.
3 HomeLink® is a registered trademark of Gentex Corporation.
OVERVIEWFEATURES/OPERATIONS
Automatic air conditioning system 20
Audio 21
Automatic Transmission 14-15
Auto lock/unlock1,2 14
Bluetooth® Device Pairing Section 30-39Clock 22
Dynamic radar cruise control 24-25
Lights
1 & turn signals 19
Multi-Information display 23
Parking brake 16
Power outlet 21
Seat adjustments-Front 16
Seat heaters 19
Seats-Head restraints 17
Seats-Folding down rear seats 17
Starting your vehicle 14
Steering wheel switches 22
Windows-Power 17
Windshield wipers & washer 18
Tilt & telescopic steering wheel 18
USB/AUX port 21
Wireless charger 22



Door locks 28
Doors-Child safety locks 28
Emergency tire puncture repair kit 26
Floor mat installation 28
Garage door opener (Homelink®)
3 27
Seat belts 27
Seat belts-Shoulder belt anchor 27
Star Safety System™ 29
Tire pressure monitoring (warning) system 26
Fuel door release button and cap 8
Indicator symbols 4-5
Instrument cluster 4
Instrument panel
2-3Keyless entry1,2 6
Light control-Instrument panel 8
Smart Key System1,2 6-7







Automatic high beams 10
Blind spot monitor (BSM) 13
Hydrogen fuel cell system 9
Lane Departure Alert (LDA) 11
Pre-Collision System (PCS) 12
Water release (H2O) switch 10


















HYDROGEN FUEL CELL SYSTEM
& SAFETY FEATURES
SAFETY AND EMERGENCY FEATURES

3
OVERVIEWHYDROGEN FUEL CELL SYSTEM
& SAFETY FEATURESFEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
“ECO MODE” switch
“Traction OFF” or “ON” switch
“P” position switch
Luggage security system (disable trunk opener) switch
Transmission
Parking brake lever
Tilt and telescopic steering control switch
Hood lock release lever
Trunk opener
Fuel door opener
Instrument panel light control switches
Water release switch
Automatic high beam switch
1
For details, refer to the “Navigation System Owner’s Manual.”

4
OVERVIEW
Indicator symbols
Instrument cluster
Indicators and warning lights
Main display
Multi-Information Display
Clock
Transmission shift position indicator
Anti-lock Brake System warning1
Slip indicator1
Pre-Collision System warning light
Open door warning Hydrogen leak warning
Charging system warning1
Brake system warning1
Parking brake warning1
Electric power steering system warning1
Brake system warning light (yellow indicator)1


,ILQGLFDWRUGRHVQRWWXUQRIIZLWKLQDIHZVHFRQGVRIVWDUWLQJ+\GURJHQ)XHO&HOO6\VWHPWKHUH
 PD\EHPDOIXQFWLRQ+DYHYHKLFOHLQVSHFWHGE\\RXU7R\RWDGHDOHU
For details, refer to “Indicators and warning lights,” Section 3-3,  2ZQHU·V
0DQXDO.
High coolant temperature warning
Supplemental Restraint System warning

6
OVERVIEW
Keyless entry
Push
Locking operation
Push ONCE: Driver door
TWICE: All doors
Unlocking operation
NOTE: If a door is not opened within 60 seconds of unlocking, all doors will relock
for safety.
Unlocking trunk
Push and hold
Panic button
Push and hold
Smart Key system
Start function
Accessories such as the radio will operate.
Power ON; Fuel Cell System is not engaged.
All systems OFF.
Accessory
Ignition On
Without depressing the brake pedal, pressing the “POWER” switch will change the
operation mode in succession from:
Power (without starting the Fuel Cell System)
OFF
Push Depress
brake pedal

12
HYDROGEN FUEL CELL SYSTEM
& SAFETY FEATURES

Pre-Collision System (PCS)
When a high possibility of a frontal collision is detected by the radar sensor, a
buzzer sounds and a message urging the driver to take evasive action appears
on the multi-information display. If the driver then applies brakes, the system
applies greater brake force in relation to how strongly the brake pedal is
depressed. If the system determines that a collision is unavoidable, the brakes
are automatically applied to reduce the collision speed. The alert timing for the
pre-collision system can be changed or turned on/off, as necessary, by pressing
TRAC switch.
The system is enabled each time the power switch is turned to ON mode.
Refer to the Owner‘s Manual for more details on this system before attempting
to use it.


Each time the Pre-Collision System switch is pressed, the response to the distance
changes as follows:
Far
Middle
Near
Press the TRAC switch for 3 seconds or more.
Changing the pre-collision warning timing
Disabling the Pre-Collision System

14
FEATURES/OPERATIONS
Auto lock/unlock
Automatic door lock functions can be set, or turned OFF.
-Doors lock when shifting to any positions other than P.
-Doors lock when the vehicle speed is approximately 12 mph or higher.
-Doors unlock when shifting into P.
-Doors unlock when the driver’s door is opened.
Refer to the Owner’s Manual for more details.(1) Depress the brake pedal, and
press the “POWER” switch
EULH

16
P position switch
The shift position can be changed to P through the use of the P position switch.
Parking brake
Set: Depress
Release: Depress again
Push
Seat adjustments-Front
Seatback angle adjustment
Lumbar support adjustment
Vertical height adjustment
Seat cushion (front) angle adjustment
Seat position (forward/backward)
Power seat (driver side only)*
Note:
Be careful to not allow the head
rest to touch the ceiling.
FEATURES/OPERATIONS
(1) Fully stop the vehicle
(2) Keep depressing the brake pedal
(3) Press the P position switch.

24
FEATURES/OPERATIONS
Vehicle-to-vehicle distance button Indicators
Set speed Display
Dynamic radar control switch
Refer to the Owner’s Manual for more details and complete safety precautions
before attempting to use “Dynamic Radar Cruise Control.”
Dynamic radar cruise control
Distance control mode
In distance control mode, vehicle will cruise at a set speed, decelerate to maintain
selected distance from a slower vehicle traveling in front, and accelerate back up
to the selected speed if the vehicle in front changes lanes or speeds up.
(1) Push the ON-OFF button to activate/deactivate the system.
(2) To set, pull the lever down.
(3) To increase and set speed, push the lever up.
To decrease, push lever down. Move the lever slightly to adjust in 1 mph
increments. Move all way up/down to adjust in 5 mph increments.
(4) To resume set speed, push up and hold.
To cancel pull the lever toward you, or depress the brake pedal. (1) (2) (3)
Increase/Resume
Decrease Cancel
Push the vehicle-to-vehicle distance button to change distance.
PushLong
160 ft.*Medium
130 ft.*Short
100 ft.*Preceding
vehicle mark*Approximately

29
OVERVIEW
HYDROGEN FUEL CELL VEHICLE SYSTEMFEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
(QKDQFHG9HKLFOH6WDELOLW\&RQWUROSURYLGHVFRRSHUDWLYHFRQWURORIWKH$%675$&
VSC and EPS.
Enhanced VSC helps to maintain directional stability when loss of traction occurs
during a turn.
(QKDQFHG9HKLFOH6WDELOLW\&RQWURO96&
VSC helps prevent loss of traction during cornering by reducing Motor power
RXWSXWDQG7UDFWLRQ&RQWUROKHOSVPDLQWDLQWUDFWLRQRQORRVHJUDYHODQGZHWLF\
or uneven surfaces by applying brake force to the spinning wheel(s).
Toyota’s TRAC sensors are activated when one of the drive wheels starts to slip.
TRAC limits Motor power output and applies the brakes to the spinning wheel. This
transfers power to the wheels that still have traction to help keep you on track.
7UDFWLRQ&RQWURO75$&
$QWL/RFN%UDNH6\VWHP$%6
ABS helps prevent brakes from locking up by “pulsing” brake pressure to each
wheel. This limits brake lockup and helps provide directional control for the
current road conditions.
Toyota’s ABS sensors detect which wheels are locking up and limits wheel lockup
by “pulsing” each wheel’s brakes independently. Pulsing releases brake pressure
repeatedly for fractions of a second. This helps the tires attain the traction that
FXUUHQWURDGFRQGLWLRQVZLOODOORZKHOSLQJ\RXWRVWD\LQGLUHFWLRQDOFRQWURO
(OHFWURQLF%UDNH)RUFH'LVWULEXWLRQ(%'
7R\RWD