navigation TOYOTA PRIUS PRIME 2019 Accessories, Audio & Navigation (in English)

146
PRIUS PRIME_Navi_OM47D14U_(U)
18.10.16 10:48
2. MOBILE ASSISTANT OPERATION
1. MOBILE ASSISTANT
1Press and hold this switch until you
hear the beeps.
2The Mobile Assistant can be used only
when the following screen is displayed.
To cancel the Mobile Assistant: Select
“Cancel” , press the on the steering
wheel, or press and hold the on the
steering wheel.
 To restart the Mobile Assistant for addi-
tional commands, press the on the
steering wheel.
• Mobile Assistant can only be restarted
after the system responds to a voice
command. • After some phone and music com-
mands, the Mobile Assistant feature will
automatically end to complete the
requested action.
The Mobile Assistant feature will
activate Apple’s Siri
® Eyes Free mode
via the steering wheel switches. To
operate the Mobile Assistant, a
compatible cellular phone must be
registered and connected to this
system via Bluetooth
®. ( P.44)
PS098IO
 The volume of the Mobile Assistant can
be adjusted using the “PWR
·VOL”
knob or steering wheel volume control
switches. The Mobile Assistant and
phone call volumes are synchronized.
INFORMATION
● The available features and functions
may vary based on the iOS version
installed on the connected device.
● Some Siri
® features are limited in Eyes
Free mode. If you attempt to use an
unavailable function, Siri
® will inform
you that the function is not available.
● If Siri
® is not enabled on the cellular
phone connected via Bluetooth®, an
error message will be displayed on the
screen.
● While a phone call is active, the Mobile
Assistant cannot be used.
● If using the navigation feature of the cel-
lular phone, ensure the active audio
source is Bluetooth
® audio or iPod in
order to hear turn by turn direction
prompts.

158
1. REAR VIEW MONITOR SYSTEM
PRIUS PRIME_Navi_OM47D14U_(U)
18.10.16 10:48
2. REAR VIEW MONITOR SYSTEM PRECAUTIONS
The image adjustment procedure for the
rear view monitor system screen is the
same as the procedure for adjusting the
navigation screen. ( P.41)
AREA DISPLAYED ON
SCREEN
The rear view monitor system displays
an image of the view from the bumper
of the rear area of the vehicle.
Screen Displayed area
Corners of bumper
INFORMATION
●The area displayed on the screen may
vary according to vehicle orientation
conditions.
● Objects which are close to either corner
of the bumper or under the bumper can-
not be displayed.
● The camera uses a special lens. The
distance of the image that appears on
the screen differs from the actual dis-
tance.
● Items which are located higher than the
camera may not be displayed on the
monitor.

163
1. REAR VIEW MONITOR SYSTEM
PRIUS PRIME_Navi_OM47D14U_(U)
18.10.16 10:48
PERIPHERAL MONITORING SYSTEM
6
3. THINGS YOU SHOULD KNOW
If you notice any of the following symptoms, refer to the likely cause and the
solution, and re-check.
If the symptom is not resolved by the solution, have the vehicl e inspected by
your Toyota dealer.
IF YOU NOTICE ANY SYMPTOMS
SymptomLikely causeSolution
The image is difficult to see
 The vehicle is in a dark
area
 The temperature around
the lens is either high or low
 The outside temperature is
low
 There are water droplets on
the camera
 It is raining or humid
 Foreign matter (mud etc.) is
adhering to the camera
 Sunlight or headlights are
shining directly into the
camera
 The vehicle is under fluo-
rescent lights, sodium
lights, mercury lights etc.
Back up while visually check-
ing the vehicle’s surround-
ings. (Use the monitor again
once conditions have been
improved.)
The procedure for adjusting
the picture quality of the rear
view monitor system is the
same as the procedure for
adjusting the navigation
screen. ( P.41)
The image is blurry
Dirt or foreign matter (such as
water droplets, snow, mud
etc.) is adhering to the cam-
era.Flush the camera with a large
quantity of water and wipe the
camera lens clean with a soft
and wet cloth.
The image is out of alignmentThe camera or surrounding
area has received a strong
impact.Have the vehicle inspected by
your Toyota dealer.
The fixed guide lines are very
far out of alignment
The camera position is out of
alignment.Have the vehicle inspected by
your Toyota dealer.
The vehicle is tilted (there is
a heavy load on the vehicle,
tire pressure is low due to a
tire puncture, etc.)
 The vehicle is used on an
incline.If this happens due to these
causes, it does not indicate a
malfunction.
Back up while visually check-
ing the vehicle’s surround-
ings.

184
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
PRIUS PRIME_Navi_OM47D14U_(U)
18.10.16 10:48
1Display the message inbox screen.
(P.181)
2Select the desired message from the
list.
3Select “Quick Message” .
4Select the desired message.
5Select “Send” .
While the message is being sent, a send-
ing message screen is displayed.
 To cancel sending the message, select
“Cancel” .
■EDITING QUICK REPLY MESSAG-
ES
1Select “Quick Message” .
2Select corresponding to the de-
sired message to edit.
3Select “OK” when editing is complet-
ed.
REPLYING TO A MESSAGE
(QUICK REPLY)
15 messages have already been
stored.
INFORMATION
● Depending on the type of Bluetooth®
phone, reply function is not available.
This operation cannot be performed
while driving.
INFORMATION
●To reset the editquick reply messages,
select “Default” .
● “Quick Message 1” (“I am driving and
will arrive in approximately [ETA]
minutes.”) :
This message cannot be edited and will
automatically fill in [ETA] with the
navigation calculated estimated time of
arrival on the confirm message screen.
If there are waypoints set, [ETA] to the
next waypoint will be shown.
If there is no route currently set in the
navigation system, “Quick Message 1”
cannot be selected.

206
PRIUS PRIME_Navi_OM47D14U_(U)
18.10.16 10:48
1. QUICK REFERENCE ................... 208
MAP SCREEN ..................................... 208
NAVIGATION OPTIONS SCREEN...... 210
2. MAP SCREEN OPERATION ....... 211
CURRENT POSITION DISPLAY ......... 211
MAP SCALE ........................................ 212
ORIENTATION OF THE MAP ............. 212
SWITCHING THE MAP MODE............ 213
SCREEN SCROLL OPERATION ........ 215
ADJUSTING LOCATION IN SMALL INCREMENTS................................... 216
3. MAP SCREEN INFORMATION .......................... 217
DISPLAYING MAP INFORMATION .... 217
DISPLAYING INFORMATION ABOUT
THE ICON WHERE THE CURSOR
IS SET ............................................... 219
STANDARD MAP ICONS .................... 220
4. TRAFFIC INFORMATION ............ 221
DISPLAYING TRAFFIC INFORMATION ON THE MAP .......... 223
1. DESTINATION SEARCH SCREEN .................................... 224
2. SEARCH OPERATION. ............... 226
SELECTING SEARCH AREA .............. 227
SETTING HOME AS
DESTINATION................................... 227
SETTING PRESET DESTINATIONS AS DESTINATION ............................. 227
SEARCHING BY ADDRESS ................ 228
SEARCHING BY POINT OF INTEREST ......................................... 229
SEARCHING FROM PREVIOUS DESTINATIONS ................................ 232
SEARCHING BY ADDRESS BOOK ................................................ 232
SEARCHING BY EMERGENCY .......... 233
SEARCHING BY INTERSECTION AND FREEWAY ................................ 233
SEARCHING BY MAP ......................... 235
SEARCHING BY COORDINATES ....... 235
3. STARTING ROUTE GUIDANCE ....... ....................... .. 236
STARTING ROUTE GUIDANCE.......... 236
PAUSING GUIDANCE ......................... 239
1BASIC OPERATION2DESTINATION SEARCH
8
NAVIGATION SYSTEM

8
207
PRIUS PRIME_Navi_OM47D14U_(U)
18.10.16 10:48
1
2
3
4
5
6
7
8
9
1. ROUTE GUIDANCE SCREEN ..... 240
SCREEN FOR ROUTE GUIDANCE ... 240
ROUTE OVERVIEW............................ 241
DURING FREEWAY DRIVING............ 242
WHEN APPROACHING INTERSECTION ............................... 243
TURN LIST SCREEN .......................... 244
TURN-BY-TURN ARROW SCREEN ........................................... 244
2. TYPICAL VOICE GUIDANCE PROMPTS.................................. 245
3. EDITING ROUTE ......................... 246
ADDING DESTINATIONS ................... 247
REORDERING DESTINATIONS ......... 247
DELETING DESTINATIONS ............... 247
SETTING ROUTE PREFERENCES ............................... 248
SELECTING ROUTE TYPE ................ 248
DETOUR SETTING ............................. 249
1. MEMORY POINTS SETTINGS .... 250
SETTING UP HOME ........................... 251
SETTING UP PRESET DESTINATIONS................................ 252
SETTING UP ADDRESS BOOK ......... 254
SETTING UP AREAS TO AVOID ........ 257
DELETING PREVIOUS DESTINATIONS................................ 259
1. DETAILED NAVIGATION SETTINGS ................................. 260
SCREENS FOR NAVIGATION
SETTINGS ........................................ 260
2. TRAFFIC SETTINGS................... 264
SCREEN FOR TRAFFIC SETTINGS ........................................ 264
AUTO AVOID TRAFFIC....................... 265
MY TRAFFIC ROUTES ....................... 266
1. GPS (GLOBAL POSITIONING SYSTEM) .................... ............... 271
LIMITATIONS OF THE
NAVIGATION SYSTEM..................... 271
2. MAP DATABASE VERSION AND COVERED AREA ............. 274
MAP INFORMATION ........................... 274
ABOUT THE MAP DATA ..................... 275
3ROUTE GUIDANCE
4MEMORY POINTS
5SETUP
6TIPS FOR THE NAVIGATION
SYSTEM
NAVIGATION SYSTEM

208
PRIUS PRIME_Navi_OM47D14U_(U)
18.10.16 10:48
1. BASIC OPERATION
1. QUICK REFERENCE
MAP SCREEN
To display this screen, press the “APPS” button, then select “Navigation” on the
“Apps” screen.
No.NameFunctionPage
2D North-up, 2D
heading-up or 3D
heading-up sym-
bolIndicates whether the map orientation is set to
north-up or heading-up. The letter(s) beside this
symbol indicate the vehicle’s heading direction
(e.g. N for north). In 3D map, only a heading-up
view is available.
212
Options buttonSelect to display the “Navigation Options” screen.210
“GPS” mark
(Global Position-
ing System)Shows that the vehicle is receiving signals from
the GPS.271

209
1. BASIC OPERATION
PRIUS PRIME_Navi_OM47D14U_(U)
18.10.16 10:48
NAVIGATION SYSTEM
8
Traffic indicator
Shows that traffic information is received. Select
to start voice guidance for traffic information.
When traffic information is received via HD, HD
mark is displayed on the right.
221
Scale indicatorThis figure indicates the map scale.212
Zoom in/out but-
tonSelect to magnify or reduce the map scale. When
either button is selected, the map scale indicator
bar appears at the bottom of the screen.212
Current position
button/voice
guidance button Select to display the current position address.
 Select to repeat voice guidance.
245
Destination but-
tonSelect to display the “Destination” screen.224
Speed limit iconIndicates the speed limit on the current road. The
display of the speed limit icon can be set to on/off.217
Route informa-
tion bar
Displays the current street name, or the distance
with the estimated travel time/arrival time to the
destination. The route information bar fills from
left to right as the vehicle progresses on the
route.
240
Route informa-
tion buttonSelect to change the display between the current
street name and the distance with the estimated
travel/arrival time.
240
No.NameFunctionPage

210
1. BASIC OPERATION
PRIUS PRIME_Navi_OM47D14U_(U)
18.10.16 10:48
NAVIGATION OPTIONS SCREEN
The navigation options allow you to change map configurations, display/hide POI
icons, and edit the navigation routes. To display the “Navigation Options” screen,
press the “APPS” button, select “Navigation” on the “Apps” screen, and select
“Options” on the map screen.
No.FunctionPage
Select to change the map configuration.213
Select to change the displayed map information such as POI icon s,
route trace, speed limit, etc.217
Select to display the map version and coverage area.274
Select to edit the set route.246
Select to pause or resume route guidance.239
Select to display the over view of the entire route.241

211
1. BASIC OPERATION
PRIUS PRIME_Navi_OM47D14U_(U)
18.10.16 10:48
NAVIGATION SYSTEM
8
2. MAP SCREEN OPERATION
1Press the “APPS” button.
2Select “Navigation” .
3Check that the current position map is
displayed.
CURRENT POSITION
DISPLAY
To correct the current position manually:
P. 2 6 2
PS081IO
INFORMATION
● While driving, the current position mark
is fixed on the screen and the map
moves.
● The current position is automatically set
as the vehicle receives signals from the
GPS (Global Positioning System). If the
current position is not correct, it is auto-
matically corrected after the vehicle
receives signals from the GPS.
● After the battery disconnection, or on a
new vehicle, the current position may
not be correct. As soon as the system
receives signals from the GPS, the cor-
rect current position is displayed.