stop start TOYOTA PRIUS PRIME 2021 Owners Manual (in English)

16
ELECTRIC VEHICLE SYSTEM
Charging Information
Remaining charging time and charging information is displayed on the
Multi-Information%JTQMBZ .*%
PSJOEJTQMBZ JGFRVJQQFE

When any door is opened during charging, the current charging condition and
remaining time until charging is complete can be checked.
If approximately 100 seconds elapse after the power switch is turned to ON mode
during charging, the power switch will automatically turn off and the display will
disappear.
After charging is complete, the first time that the hybrid system is started, a
message detailing the results of the charging is displayed. Also, a message is
displayed if an operation that stops charging is performed or a situation where
charging cannot be performed occurs.
Refer to the Owner’s Manual for limitations and more details.
WHILE CHARGING
AFTER CHARGING IS COMPLETED

17
OVERVIEW ELECTRIC VEHICLE SYSTEM FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY &
EMERGENCY FEATURES
Charging system safety functions
- The Hybrid System will not start while the charging cable is attached to the
vehicle, even if the POWER switch is operated.
*GUIFDIBSHFDBCMFJTDPOOFDUFEXIJMFUIF3&"%:JOEJDBUPSJTJMMVNJOBUFE
UIF
Hybrid System will stop automatically and driving will not be possible.
- When the charge cable is connected to the vehicle, the shift position cannot be
changed from P to another position.
- If the latch release button is pressed, charging will not begin even if the charge
cable is connected.
- Charging will stop if the latch release button is pressed and held for several
seconds during charging. When restarting charging, reinsert the charge
connector after pulling it out, and check that the charging indicator illuminates.

18
Hybrid Synergy Drive System
FEATURES & OPERATIONS
The Hybrid Synergy Drive System utilizes a computer-controlled gasoline engine
and electric motor to provide the most efficient combination of power for the
vehicle. To conserve energy, when the brakes are applied the braking force
generates electricity which is then sent to the traction battery. In addition, the
engine shuts off when the vehicle is stopped. The benefits are better fuel economy
and reduced vehicle emissions.
NOTE: Fuel consumption and energy information of the Hybrid System are
shown on the Multi-Information Display.
-Ensure tire pressures are maintained at levels specified in the Owner’s Manual.
-When possible, link trips to reduce engine cold starts.
-Avoid driving at speeds that are higher than necessary, especially on the highway.
-When possible, avoid sudden stops to maximize regenerative braking energy.
-Minimize use of the air conditioning.
5*14'03*.1307&%'6&-&$0/0.:
45"35*/(:0637&)*$-&
Auto lock/unlock
Automatic door locks can be programmed to operate in different modes, or turned
OFF.
Shift position linked door locking/unlocking function
-Doors lock when shifting from Park.
-Doors unlock when shifting into Park.
Speed linked door locking function
%PPSTMPDLXIFOUIFWFIJDMFTQFFEJTBQQSPYJNBUFMZNQI LNI
PSIJHIFS
'ULYHU

32
FEATURES & OPERATIONS
Power outlets-12V DC
5IFi108&3wTXJUDINVTUCFJOUIFi"$$&4403:wPSi*(/*5*0/0/wNPEFGPS
use.
Qi wireless charger (if equipped)
Powerswitch
Chargearea
Press(1)
Whentheengineisturnedoff,thelaststate
(ON/OFF)ofthechargerismemorized.
Place(2)
A mobile device can be charged wirelessly on the tray. (1) Press the wireless
charger power switch and the green operation indicator light turns on. (2) Place
a compatible mobile device on the tray as shown in the illustration. An amber
indicator illuminates while charging is in progress. When charging is complete, the
indicator illuminates green. Some phones, cases or cover type wireless chargers
may not cause the green indicator to illuminate even though it is fully charged.
Refer to the Owner’s Manual for limitations and more details on this system before
attempting to use it.
Operationindicatorlight
Placedevicenearestthecenterofchargingarea
forbestresults.Movingdevicemayresultin
stoppingorrestartingthechargingprocess.

37
OVERVIEW ELECTRIC VEHICLE SYSTEM FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY &
EMERGENCY FEATURESAssist mode will be canceled or stopped in the following cases.
Assist control is canceled when
• The system temperature preservation function operates
• There is a system malfunction
• System determined that the parking environment is not suitable for assist to
continue
When assist control is canceled, firmly grasp the steering wheel, depress the brake
pedal and stop the vehicle.
Start again from the beginning, as the system will already be canceled. When
continuing to park manually, operate the steering wheel as you normally would.
Assist control is stopped when
• The steering wheel is operated
t5IFWFIJDMFTQFFEFYDFFETNQI LNI
EVSJOHBTTJTUDPOUSPM
• The Parking Support Brake function operates
When assist control is stopped, it can be resumed by following the guidance shown
on the screen.
5IF*OUFMMJHFOU1BSLJOH"TTJTU *1"
TZTUFNSFRVJSFTESJWFSCSBLFDPOUSPM"MXBZT
look around outside the vehicle and use mirrors to confirm clearance.
* Refer to section S-APGS (Simple Advanced Parking Guidance System) in the
Owner’s Manual for limitations and more details.
** Refer to section PKSB (Parking Support Brake function) in the Owner’s Manual
for limitations and more details.
CANCELING OF STOPPING ASSIST MODE
The VSC OFF switch can be used to help free a stuck vehicle in surroundings like
mud, dirt or snow. While the vehicle is stopped, press switch to disable the TRAC
system.
To disable both VSC and TRAC systems, press and hold the switch for at least 3
seconds.
Refer to the Owner’s Manual for limitations and more details.
Push
Vehicle Stability Control (VSC)/
TRAC OFF switch