TOYOTA PROACE 2019 Owners Manual (in English)

341
Toyota Pro Touch with navigation system
GPS satellite navigation - Connectivity - Multimedia audio - Bluetooth® telephone
ContentsFirst steps 342
Steering mounted controls 344
Menus 345
Voice commands 346
Navigation 352
Connected navigation 368
Connectivity 378
Radio Media 388
Telephone 400
Settings 412
Frequently asked questions 422
The system is protected in such a way that it will only operate in your vehicle.As a safety measure and because it requires sustained attention by the driver, the pairing of a Bluetooth mobile telephone with the Bluetooth hands-free system of your audio system must be done with the vehicle stationary and the ignition on.The display of the energy economy mode message signals that a change to standby is imminent. For more information on the Energy economy mode refer to the corresponding section.
.
Audio and Telematics

342
FM/87.5 MHz
87.5MHz 12:13
23 °C 87.5 MHz
First steps
With the engine running, a press mutes the sound.With the ignition off, a press turns the system on.
Volume.
Use the buttons either side of the touch screen for access to the menus, then press the virtual buttons in the touch screen. All of the touch areas of the screen are white.Each menu is displayed in one or two pages (primary page and secondary page).
Secondary pagePrimary page
The touch screen is of the "capacitive" type.To clean the screen, use a soft, non-abrasive cloth (spectacles cloth) with no additional product.Do not use sharp objects on the screen.Do not touch the screen with wet hands.
Audio and Telematics

343
12:13
23 °C531 kHz
Select the audio source (depending on version):- FM / DAB* / AM* stations.- Smartphone via MirrorLinkTM.- USB memory stick.- Media player connected to the auxiliary socket ( jack, cable not supplied).- Telephone connected by Bluetooth* and using Bluetooth* audio streaming.
* Depending on equipment.
Short-cuts: using the virtual buttons in the upper band of touch screen, it is possible to go directly to the selection of audio source, the list of stations (or titles, depending on the source), message notifications, emails, mapping updates and, depending on services, navigation notifications.
In very hot conditions, the volume may be limited to protect the system. It may go into standby (screen and sound off) for at least 5 minutes.The return to normal takes place when the temperature in the passenger compartment drops.
In the "Settings" menu you can create a profile for just one person or a group of people with common points, with the possibility of entering a multitude of settings (radio presets, audio settings, navigation history, contact favourites, ...); these settings are taken into account automatically.
.
Audio and Telematics

344
Steering mounted controls
Media (short press): change the multimedia source.Telephone (short press): call.Call in progress (short press): access to telephone menu.Telephone (long press): reject an incoming call, end call, access to telephone menu.
Decrease volume.
Voice commands:Short press, system voice commands.Long press, smartphone voice commands via the system.Mute / Restore the sound.
Radio (rotate): automatic search for the previous / next station.Media (rotate): previous / next track, move in a list.Short press: Confirm a selection. Other than selection, access to presets.
Radio: display the list of stations.Media: display the list of tracks.Radio, press and hold: update the list of stations received.
Increase volume.
Audio and Telematics

345
12:13
23 °C12:13
23 °C531 kH z
FM/87.5 MHz
87.5MH z 12:13
23 °C 87.5 MHz
12:13
23 °C531 kH z12:13
23 °C
Menus
Settings
Radio MediaConnected navigation
Driving
Connectivity
Telephone
Enter settings for a personal profile and/or adjust the settings for sound (balance, ambience, ...), and the display (language, units, date, time, ...).
Select an audio source, a radio station, display photographs.Enter navigation settings and choose a destination.Use services available in real time, depending on equipment.
Activate, deactivate, adjust the settings for certain vehicle functions.
Operate certain applications on a smartphone connected via MirrorLinkTM.Check the state of Bluetooth and Wi-Fi connections.
Connect a telephone by Bluetooth®, read messages and emails and send quick messages.
.
Audio and Telematics

346
Voice commands
First stepsSteering mounted controlsInformation - Using the system
Press the Push To Talk button and tell me what you'd like after the tone. Remember you can interrupt me at any time by pressing this button. If you
press it again while I'm waiting for you to speak, it'll end the conversation. If you need to start over, say "cancel". If you want to undo something, say "undo". And to get information and tips at any time, just say "help". If you ask to me do something and there's some information missing that I need, I'll give you some examples or take you through it step by step. There's more information available in "novice" mode. You can set the dialogue mode to "expert" when you feel comfortable.
To ensure that voice commands are always recognised by the system, please observe the following recommendations:- speak in a normal tone without breaking up words or raising your voice.- always wait for the "beep" (audible signal) before speaking.- for best operation, it is recommended that the windows and opening roof (if fitted) be closed to avoid inter ference from extraneous noises.- before making a voice command, ask other passengers to not speak.
The voice commands, with a choice of 12 languages (English, French, Italian, Spanish, German, Dutch, Portuguese, Polish, Turkish, Russian, Arabic, Brazilian), are made using the language previously chosen and set in the system.
The voice commands in Arabic for: "Navigate to address" and "Display POI in the city", are not available.
Example of a "voice command" for navigation:"Navigate to address 11 Regent Street, London".
Example of a "voice command" for
the radio and media:"Play ar tist Madonna".
Example of a "voice command" for the telephone:"Call David Miller".
Pressing this button activates the voice commands function.
Audio and Telematics

347
Global voice commands
These commands can be made from any screen page after pressing the voice command or telephone button located on the steering wheel, as long as there is no telephone call in progress.
"Voice command"Help message
Help
There are lots of topics I can help you with. You can say: "help with phone", "help with navigation", "help with media" or "help with radio". For an overview on how to use voice controls, you can say "help with voice c ont ro ls".
Voice command help
Navigation help
Radio help
Media help
Telephone help
Set dialogue mode as <...>Select &#34;beginner&#34; or &#34;expert&#34; mode.
Select profile <...>Select profile 1, 2 or 3.
Ye s
Say &#34;yes&#34; if I got that right. Other wise, say &#34;no&#34; and we&#39;ll start that again.
No
.
Audio and Telematics

348
&#34;Navigation&#34; voice commands
These commands can be issued from any screen page after pressing the voice command or telephone button on the steering wheel, as long as there is no telephone call in progress.
Depending on the country, give the destination instructions (address) in the language used by the system.
&#34;Voice command&#34;Help message
Navigate home
To start guidance or add a stopover, say &#34;navigate to&#34; and then the address or contact name. For example, &#34;navigate to address 11 Regent Street, London&#34;, or &#34;navigate to contact, John Miller&#34;. You can specify if it&#39;s a preferred or recent destination. For example, &#34;navigate to preferred address, Tennis club&#34;, &#34;navigate to recent destination, 11 Regent Street, London&#34;. Other wise, just say, &#34;navigate home&#34;. To see points of interest on a map, you can say things like &#34;show hotels in Banbury&#34; or &#34;show nearby petrol station&#34;. For more information you can ask for &#34;help with route guidance&#34;.
Navigate to work
Navigate to preferred address <...>
Navigate to contact <...>
Navigate to address <...>
Show nearby POI <...>
Remaining distance
To get information about your current route, you can say &#34;tell me the remaining time&#34;, &#34;distance&#34; or &#34;arrival time&#34;. Try saying &#34;help with navigation&#34; to learn more commands.
Remaining time
Arrival time
Stop route guidance
Audio and Telematics

349
&#34;Radio Media&#34; voice commands
These commands can be issued from any screen page after pressing the voice command or telephone button on the steering wheel, as long as there is no telephone call in progress.
&#34;Voice command&#34;Help message
Tune to channel <...>You can pick a radio station by saying &#34;tune to&#34; and the station name or frequency. For example &#34;tune to channel Talksport&#34; or &#34;tune to 98.5 FM&#34;. To listen to a preset radio station, say &#34;tune to preset number&#34;. For example &#34;tune to preset number five&#34;.
What&#39;s playingTo display the details of the current &#34;track&#34;, &#34;artist&#34; and &#34;album&#34;, you can say &#34; What&#39;s playing&#34;
Play song <...>
Use the command &#34;play&#34; to select the type of music you&#39;d like to hear. You can pick by &#34;song&#34;, &#34;artist&#34;, or &#34;album&#34;. Just say something like &#34;play artist, Madonna&#34;, &#34;play song, Hey Jude&#34;, or &#34;play album, Thriller&#34;.Play ar tist <...>
Play album <...>
Media voice commands are available only for a USB connection.
.
Audio and Telematics

350
&#34;Voice command&#34;Help message
Call contact <...>*
To make a phone call, say &#34;call&#34; followed by the contact name, for example: &#34;Call David M iller &#34;. You can also include the phone type, for example: &#34;Call David Miller at home&#34;. To make a call by number, say &#34;dial&#34; followed by the phone number, for example, &#34;Dial 107776 835 417&#34;. You can check your voicemail by saying &#34;call voicemail&#34;. To send a text, say &#34;send quick message to&#34;, followed by the contact, and then the name of the quick message you&#39;d like to send. For example, &#34;send quick message to David Miller, I&#39;ll be late&#34;. To display the list of calls, say &#34;display calls&#34;. For more information on SMS, you can say &#34;help with texting&#34;.
Dial <...>*
Display contacts*
Display calls*
Call (message box | voicemail)*
* This function is available only if the telephone connected to the system supports downloading of contacts and recent calls and if the download has
been done.
&#34;Telephone&#34; voice commands
If a telephone is connected to the system, these voice commands can be issued from any main screen page after pressing the telephone button on the steering wheel, as long as there is no telephone call in progress.If there is no telephone connected by Bluetooth, a voice message announces: &#34;Please first connect a telephone&#34; and the voice session will be closed.
Audio and Telematics