sensor TOYOTA RAV4 2020 Owners Manual (in English)

Page 3 of 64

1
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
INDEX
Engine maintenance 11
Fuel tank door release & cap 10
Hood release 10
Indicator symbols 6-7
Instrument cluster 5
Instrument panel 2-4
Instrument panel light control 11
Keyless entry
1 8-9
Smart Key system1 9
1 Visit your Toyota dealer for information on customizing this feature.2 Programmable by customer. Refer to the Owner’s Manual for instructions and more information.3 HomeLink® is a registered trademark of Gentex Corporation.
OVERVIEW
FEATURES & OPERATIONSFEATURES & OPERATIONS (continued)
SAFETY & EMERGENCY FEATURES TOYOTA SAFETY SENSE™ (TSS 2.0)
Air conditioning/heating 19
Audio 23
Auto lock/unlock
1 12
Automatic transmission 12
Bird’s Eye View Camera
with Perimeter Scan function 28
Blind Spot Monitor with Rear
$SPTT5SBGmD"MFSU #4.X3$5"
 
Clock 20
Cup holders 26
Door locks 14
Downhill assist control system 28
Driving mode select 32-33
Electric parking brake 13
Front and Rear Parking Assist
with Automated Braking 30
Garage door opener (Homelink
®)3 35
Intuitive Parking Assist 30
Lights
1,2 & turn signals1 16-17
Moonroof 20
Multi-Information Display (MID)
2 25
Multi-terrain select 34
Panoramic moonroof 21
Power outlets-12V DC 26
Power outlets- 120V AC
26
Qi wireless charger 27
Rear door-Power Liftgate 18
Rear view monitor system 29
Seat adjustments-Front 15
Seat adjustments-Rear 15
Seat heaters/ventilators 22
Seats-Head restraints 15Steering lock release 14
Steering wheel-Heater 22
Steering wheel switches &
UFMFQIPOFDPOUSPMT #MVFUPPUI
®
 
Stop & Start system 31
Tilt & telescopic steering wheel 14
USB charge-ports 27
USB media Port 23
7FIJDMF4UBCJMJUZ$POUSPM 74$

TRAC/Trailer sway control
OFF switch 33
Windows-Power 17
Windshield wipers & washers 17
"VUPNBUJD)JHI#FBNT ")#
 
Full-Speed Range Dynamic Radar
$SVJTF$POUSPM %3$$
 
Lane Departure Alert with Steering
"TTJTU -%"X4"
 
-BOF5SBDJOH"TTJTU -5"
 
Pre-Collision System with Pedestrian
%FUFDUJPO 1$4X1%
 
Quick overview-
Toyota Safety Sense
™ 2.0
544
36
3PBE4JHO"TTJTU 34"
 
Sensors 37
BLUETOOTH® DEVICE
PAIRING SECTION 58-60 Floor mat installation 57
Rear door child safety locks 53
Safety Connect
® 55
Seat belts 53
Seat belts-Shoulder belt anchor 53
Spare tire & tools 54
Star Safety System
TM 56-57
Tire Pressure Monitoring
XBSOJOH
4ZTUFN 51.4
 

Page 19 of 64

17
Windows-Power
Windshield wipers & washers
Front fog lights come on only when the headlights are on low beam.
Turn OFFON
FRONT
*Intermittent windshield wiper
frequency adjustment Rotate to
increase/decrease wipe frequency.* Rain-sensing windshield wiper Rotate
to increase/decrease sensor sensitivity. Intermittent (if equipped)
Adjust frequency* Adjust frequency*Single wipeSingle wipe
Interval wipeInterval wipe
Slow
Slow
FastFastPull to wash
and wipePull to wash
and wipe Off
Off
Rain-sensing (if equipped)
REAR
Single wipe
Interval wipe
Off
Push to Wash and wipe
All window auto up/down Push the switch completely down or pull it completely
up and release to fully open or close. To stop window partway, lightly push the
switch in the opposite direction.
Window lock switch Deactivates all passenger windows. Driver’s window remains
operable.
Driver side
Up
Down
Window lock switch
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
'0(-*()54 *'&26*11&%

Page 20 of 64

18
FEATURES & OPERATIONS
NOTE: If battery is disconnected, the power back door needs to be reinitialized.
1. When the liftgate reaches the desired height, push the rear liftgate close-button
POUIFEPPSKBNPGUIFMJGUHBUF
PODF1SFTTBOEIPMEUIFCVUUPOVOUJMUIFCV[[FS
TPVOET UJNFT

2. To reset the height, with the liftgate open and not moving, press and hold the
rear liftgate close-button until the buzzer sounds 4 times, and continue to hold
until it buzzes again -then let go. Push the same button to close the liftgate.
When you next open the liftgate, it will open to the maximum height.
3. To set the height using the Multi-Information Display, press “
” or “” meter
control switches and select “
” from the MID. Press “” or “” and select
and then press “”. Select Opening Adjustment, then press “”. Select
EFTJSFEQPTJUJPO IFJHIUPQUJPOTUPDIPPTFGSPN

UIFOQSFTTi
”.
For more details, refer to the Owner’s Manual.To automatically open/close Power Liftgate Quickly swipe your foot near the
lower center part of the rear bumper for within 1 second to trigger sensor. To
operate, make sure that the touchless sensor operation is enabled and that you are
carrying the remote.
Rear door-Power Liftgate (if equipped)
Instrument panel
Power Liftgate (back door)
Hands-Free, Foot-Activated Power Liftgate
(if equipped)
Open: Push and hold
Close: Push and hold again
(close only)
Sensor area
(open only)
Carry Smart
Key remote
PROGRAMMABLE POWER LIFTGATE

Page 31 of 64

29
The Blind Spot Monitor is a system that has two functions:
t5IF#MJOE4QPU.POJUPSGVODUJPO BTTJTUTUIFESJWFSJONBLJOHUIFEFDJTJPOXIFOUP
DIBOHFMBOFT

t5IF3FBS$SPTT5SBGGJD"MFSUGVODUJPO BTTJTUTUIFESJWFSXIFOCBDLJOHVQ

The system is designed to use radar sensors to detect vehicles traveling in the
Rav4’s blind spot. If a vehicle is detected, the driver will be alerted via the outside
rear view side mirror indicators.
Rear Cross Traffic Alert function:
While in reverse, when a vehicle approaching from the right or left rear of the
vehicle is detected, the outside rear view mirror indicators flash.
Refer to the Owner‘s Manual for limitations and more details on this system before
attempting to use it.
Rear view monitor system
The rear view monitor system displays an image of the view from the bumper of
the rear area of the vehicle. The camera for the rear view monitor system is located
above the license plate.
To adjust the image on the rear view monitor screen, press the “MENU” button and
select “Display”. Select “Camera” to adjust the screen contrast and brightness.
Refer to the Owner‘s Manual for limitations and more details on this system.
Refer to the Owner’s Manual for more information.
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Blind Spot Monitor with Rear Cross
Traffic Alert (BSM w/RCTA)
(if equipped)
Buzzer (RCTA only)
System ON/OFF
IndicatorsMonitor screen
display (RCTA
function only) IndicatorIndicator

Page 32 of 64

30
FEATURES & OPERATIONS
If the sensors detect an obstacle, the buzzer and MID or navigation system
display informs the driver of the approximate position and distance of the obstacle
CZJMMVNJOBUJOHDPOUJOVPVTMZ GBS
PSCMJOLJOH OFBS
%FQFOEJOHPOZPVS"VEJP
Multimedia system, you can adjust settings.
To turn system ON/OFF:

Press “
/ ” or “ / ” and “” of the meter control switches and select

”GSPNUIF.VMUJ*OGPSNBUJPO%JTQMBZ .*%


4FMFDU
and press “”. The system displays when the the system is
operational.
Refer to the Owner’s Manual for limitations and more details.
Refer to all of the section Parking Support Brake functions (static objects and rear-
crossing vehicles) in the Owner’s Manual for limitations and more details.
Front
center sensor
Rear
center sensor Corner sensors
(front)Corner sensors
(front)
Corner sensors
(rear)Corner sensors
(rear)
Intuitive Parking Assist (if equipped)
The Front and Rear Parking Assist with Automated Braking consists of the following
functions that operate when driving at a low speed or backing up, such as when
parking. When the system determines that the possibility of a collision with a
detected object is high, a warning operates to urge the driver to take evasive
action. If the system determines that the possibility of a collision with a detected
object is extremely high, the brakes are automatically applied to help avoid the
collision or help reduce the impact of the collision.
CHANGE SETTINGS
Use “ / ” or “ / ” and “” of the meter control switches to select “”
and
JOUIF.VMUJ*OGPSNBUJPO%JTQMBZ .*%
UPDIBOHFTFUUJOHT5IFTZTUFNXJMM
DPOUJOVFJOUIFMBTUTUBUFJUXBTJO 0/PS0''
XIFOUIFFOHJOFJTTUBSUFEBHBJO
Front and Rear Parking Assist with
Automated Braking
(if equipped)

Page 39 of 64

37
Radar sensorCamera sensor
Sensors
TSS 2.0 combines an in-vehicle camera mounted in front of the inside rear view
mirror and a radar mounted in the front grille. These sensors support the driver assist
systems.
The Pre-Collision System uses a radar sensor and camera sensor to help detect a
vehicle or pedestrian or bicyclist in front of your vehicle.
As there is a limit to the degree of recognition accuracy and control performance that
this system can provide, do not overly rely on this system. This system will not prevent
collisions or lessen collision damage or injury in every situation. Do not use PCS
instead of normal braking operations under any circumstances. Do not attempt to test
the operation of the Pre-Collision System yourself, as the system may not operate or
engage, possibly leading to an accident. In some situations, such as when driving in
inclement weather such as heavy rain, fog, snow or a sandstorm or while driving on a
curve and for a few seconds after driving on a curve, a vehicle or pedestrian or bicyclist
may not be detected by the radar and camera sensors, preventing the system from
operating or engaging properly.
Refer to the Toyota Owner’s Manual for a list of additional situations in which the
system may not operate properly.
Pre-Collision Warning
When the system determines that the possibility of a frontal collision is high, a buzzer
will sound and a warning message will be displayed on the Multi-Information Display
(MID) to urge the driver to take evasive action.
Pre-Collision Brake Assist
If the driver notices the hazard and brakes, the system may provide additional braking
force using Brake Assist. This system may prime the brakes and may apply greater
braking force in relation to how strongly the brake pedal is depressed.
Pre-Collision System with
Pedestrian Detection (PCS w/PD)
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES

Page 40 of 64

38
TOYOTA SAFETY SENSE™
13&$0--*4*0/4:45&. $0/5*/6&%

Refer to the Toyota Owner’s Manual for additional information on PCS operation,
settings adjustments, limitations, and precautions before attempting to use it. Pre-Collision Braking
If the driver does not brake in a set time and the system determines that the possibility
of a frontal collision with a preceding vehicle is extremely high, the system may
automatically apply the brakes, reducing speed in order to help the driver reduce the
impact and in certain cases avoid the collision.
Monocular camera sensor
Millimeter
wave radar
As part of the Pre-Collision System, this function is also designed to first provide an
alert and then automatic braking if needed.
Refer to the Toyota Owner’s Manual for additional limitations and information.Under certain conditions, the PCS system included with the TSS 2.0 package
may also help to detect a pedestrian or bicyclist in front of your vehicle using the
in-vehicle camera and front grille-mounted radar. The in-vehicle camera of PCS
detects a potential pedestrian or bicyclist based on size, profile, and motion of
the detected pedestrian or bicyclist. However, a pedestrian or bicyclist may not
be detected depending on the conditions, including the surrounding brightness
and the motion, posture, size, and angle of the potential detected pedestrian or
bicyclist, preventing the system from operating or engaging.
PCS PEDESTRIAN DETECTION

Page 51 of 64

49
ADJUSTING DISTANCE
To change the vehicle-to-vehicle distance

Push the “
” button to cycle
through the settings, which will
change progressively.
This mode employs a radar sensor to detect the presence of a preceding vehicle
VQUPBQQSPYJNBUFMZGU N
BIFBE
EFUFSNJOFTUIFDVSSFOUWFIJDMFUPWFIJDMF
following distance and operates to maintain a preset following distance from the
vehicle ahead. These distances vary based on vehicle speed.
LONG
(default setting)MIDDLESHORT
Note: Vehicle-to-vehicle distance will close in when traveling on long downhill
slopes.
Preceding vehicle
mark
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
(1) (2) (3)

Constant speed cruising when there are no vehicles ahead
The vehicle travels at the speed set by the driver. The desired vehicle-to-
vehicle distance can also be set by operating the vehicle-to-vehicle distance
control.

Deceleration cruising and follow-up cruising when a preceding vehicle
driving slower than the set speed appears
When a vehicle is detected running ahead of you, the system automatically
decelerates your vehicle. When a greater reduction in vehicle speed is
OFDFTTBSZ
UIFTZTUFNBQQMJFTUIFCSBLFT UIFCSBLFMJHIUTXJMMDPNFPOBUUIJT
UJNF
5IFTZTUFNXJMMSFTQPOEUPDIBOHFTJOUIFTQFFEPGUIFWFIJDMFBIFBE
in order to maintain the vehicle-to-vehicle distance set by the driver. A warning
tone warns you when the system cannot decelerate sufficiently to prevent your
vehicle from closing in on the vehicle ahead.

Page 58 of 64

56
Star Safety System™
SAFETY & EMERGENCY FEATURES
"/5*-0$,#3",&4:45&. "#4

Toyota’s ABS sensors detect which wheels are locking up and limits wheel lockup
by “pulsing” each wheel’s brakes independently. Pulsing releases brake pressure
repeatedly for fractions of a second. This helps the tires attain the traction that
current road conditions will allow, helping you to stay in directional control.
#3",&"44*45 #"

Brake Assist is designed to detect sudden or “panic” braking, and then add braking
pressure to help decrease the vehicle’s stopping distance. When there’s only a split
second to react, Brake Assist can add additional brake pressure more quickly than
just the driver alone can.
&-&$530/*$#3",&'03$&%*453*#65*0/ &#%

5PZPUBT"#4UFDIOPMPHZIBT&MFDUSPOJD#SBLFGPSDF%JTUSJCVUJPO &#%
UPIFMQ
maintain control and balance when braking. EBD responds to sudden stops by
redistributing brake force to enhance the braking effectiveness of all four wheels. Your vehicle comes standard with the Star Safety System
TM, which combines Anti-
MPDL#SBLJOH4ZTUFN "#4

#SBLF"TTJTU #"

&MFDUSPOJD#SBLFGPSDF%JTUSJCVUJPO
&#%

4NBSU4UPQ5FDIOPMPHZ 445

7FIJDMF4UBCJMJUZ$POUSPM 74$
BOE5SBDUJPO
$POUSPM 53"$

5HIHUWRWKH2ZQHU

Page 59 of 64

57
Floor mat installation
There are two types of Toyota floor mats: carpeted and all-weather. Each vehicle
has model-specific floor mats. Installation is easy.
To keep your floor mat properly positioned, follow these steps:
• Only use Toyota floor mats designed for your specific model.
• Use only one floor mat at a time, using the retaining hooks to keep the mat in
place.
• Install floor mats right side up.
53"$5*0/$0/530- 53"$

VSC helps prevent loss of traction during cornering by reducing engine power, and
Traction Control helps maintain traction on loose gravel and wet, icy, or uneven
TVSGBDFTCZBQQMZJOHCSBLFGPSDFUPUIFTQJOOJOHXIFFM T

Toyota’s TRAC sensors are activated when one of the drive wheels starts to slip.
TRAC limits engine output and applies the brakes to the spinning wheel. This
transfers power to the wheels that still have traction to help keep you on track.
Always align the C marks
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES