TPMS reset TOYOTA RAV4 HYBRID 2018 Owners Manual (in English)

2
OVERVIEWInstrument panel
Steering wheel controls
1 If equipped
2 For details, refer to the “Navigation System Owner’s Manual.” 3 For details, refer to the “2018 Entune™ Audio Quick Reference Gui\
de.”
Audio control switches1,2Multi-Information Display
(MID) controls2,3
Dynamic Radar Cruise
Control (DRCC) vehicle-
to-vehicle distance
button
Dynamic Radar Cruise
Control (DRCC) or Cruise
control switch
“ENGINE START STOP” button
Windshield wiper and washer controls Instrument cluster
Headlight, turn signal, fog light and
Auto High Beam (AHB) controls
Fuel tank door release lever
Hood lock release lever
Power Liftgate main switch1
Instrument panel
light control dial
Outside rear view
mirror switches
Heated steering
wheel switch1
Lane Departure Alert
(LDA) switch
Tire Pressure Monitoring (warning)
System (TPMS) reset switch1
Voice command
switch2
Tilt and telescopic
steering lock release lever
2018_RAV4-HV_QRG_V3-JA0804.indd 28/7/17 4:03 PM

38
System reset initialization
1. Push and hold “
SET” button
until the indicator blinks three times.
2. Wait a few minutes to allow
initialization to complete.
Seat belts
SAFETY & EMERGENCY FEATURES
Keep as low on
hips as possible
Take up slack
NOTE: If a passenger’s seat belt is fully extended, then retracted even slightly,
the Automatic locking retractor (ALR) will prevent it from being re-extended
beyond that point, unless fully retracted again. This feature is used to help
hold child restraint systems securely.
To find more information about seat belts, and how to install a child re\
straint
system, refer to the Owner’s Manual.
Tire Pressure Monitoring (warning) System (TPMS)
After adjusting tire pressures, or after tires have been rotated or repl\
aced, turn the
ignition switch to “ON” and press and hold the “
SET” button until indicator blinks
three times. Let the vehicle sit for a few minutes to allow initializati\
on to complete.
Refer to the load label on the door jamb or the Owner’s Manual for ti\
re inflation
specifications.
If the tire Qressure indicator fMashes for more than  seconds and then remains on,
take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or changes
in tire pressure from natural air leakage. If the system has not been initialized
recently, setting the tire pressures to factory specifications should turn off the
light.
Moving the lever downward will allow the door to be opened only from the\
outside.

3emove the rear decL Coard.

-essen the center fastener that secures the sQare tire.
Refer to the Owner’s Manual for tire changing and jack positioning pr\
ocedures.
TOOL LOCATION
REMOVING THE SPARE TIRE
(1)
2018_RAV4-HV_QRG_V2-JA0803.indd 388/4/17 4:36 AM

39
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Seat belts-Shoulder belt anchor
Spare tire & tools
Rear door child safety locks
System reset initialization
1. Push and hold “ SET” button
until the indicator blinks three times.
2. Wait a few minutes to allow
initialization to complete.
Seat belts
Take up slack
NOTE: If a passenger’s seat belt is fully extended, then retracted even slightly,
the Automatic locking retractor (ALR) will prevent it from being re-extended
beyond that point, unless fully retracted again. This feature is used to help
hold child restraint systems securely.
To find more information about seat belts, and how to install a child re\
straint
system, refer to the Owner’s Manual.
Tire Pressure Monitoring (warning) System (TPMS)
After adjusting tire pressures, or after tires have been rotated or repl\
aced, turn the
ignition switch to “ON” and press and hold the “
SET” button until indicator blinks
three times. Let the vehicle sit for a few minutes to allow initializati\
on to complete.
Refer to the load label on the door jamb or the Owner’s Manual for ti\
re inflation
specifications.
If the tire Qressure indicator fMashes for more than  seconds and then remains on,
take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or changes
in tire pressure from natural air leakage. If the system has not been initialized
recently, setting the tire pressures to factory specifications should turn off the
light.
Moving the lever downward will allow the door to be opened only from the\
outside.

3emove the rear decL Coard.

-essen the center fastener that secures the sQare tire.
Refer to the Owner’s Manual for tire changing and jack positioning pr\
ocedures.
TOOL LOCATION
REMOVING THE SPARE TIRE
Press lock release button
push to raise or lower
Jack
Tool bag
Spare tire
(1)(2)
2018_RAV4-HV_QRG_V2-JA0803.indd 398/4/17 4:36 AM