TOYOTA SEQUOIA 2001 Service Repair Manual

DIDET±01
I18630
F18PASSENGER DOOR ECU
(w/o Driving Position Memory):
± DIAGNOSTICSPASSENGER DOOR CONTROL SYSTEM
DI±1819
2013 Author: Date:
2005 SEQUOIA (RM1146U)
TERMINALS OF ECU
Symbols (Terminal No.)Wiring ColorTerminal De-
scriptionConditionSpecified Condition
BDR e GND
(20 e 8)L±Y e W±BBatteryAlways10 to 14 V
CPUB e GND
(12 e 8)W±R e W±BBatteryAlways10 to 14 V
SIG e GND
(19 e 8)B±R e W±BIgnition switchIgnition switch ON10 to 14 V
GND e Body Ground
(8 e Body ground)W±B e Body
GroundGroundAlwaysBelow 1 V
PLS e SGND
(17 e 18)L±R e W±BPower window
pulse sensorPower window is operatedPulse generation
PLS e SGND
(17 e 18)L±R e W±BPower window
pulse sensorPower window is not operated (Switch ON)Below 1 V
PLS e SGND
(17 e 18)L±R e W±BPower window
pulse sensorPower window is not operated (Switch OFF)10 to 14 V
LMT e SGND
(16 e 18)L±W e W±BPower window
limit switchFront passenger's door window not fully closed positionBelow 1 V
LMT e SGND
(16 e 18)L±W e W±BPower window
limit switchFront passenger's door window fully closed position10 to 14 V
PU e PDN
(1 e 9)R e GPower window
motor (UP)Ignition switch ON and front passenger's window switch
OFFBelow 1 V
PU e PDN
(1 e 9)R e GPower window
motor (UP)Ignition switch ON and front passenger's window switch
UP10 to 14 V
PDN e PU
(9 e 1)G e RPower window
motor (DOWN)Ignition switch ON and front passenger's window switch
OFFBelow 1 V
PDN e PU
(9 e 1)G e RPower window
motor (DOWN)Ignition switch ON and front passenger's window switch
DOWN10 to 14 V
MPX1 e ±
(10 e ±)B e ±Multiplex com-
munication lineMultiplex communication circuit±
MPX2 e ±
(11 e ±)G±B e ±Multiplex com-
munication lineMultiplex communication circuit±

I18633
F18PASSENGER DOOR ECU
(w/ Driving Position Memory): DI±1820
± DIAGNOSTICSPASSENGER DOOR CONTROL SYSTEM
2014 Author: Date:
2005 SEQUOIA (RM1146U) PKL e LSWE
(3 e 13)
LG±B e W±B
Door key lock
and unlock
switch (LOCK)
Door key lock and unlock switch LOCKBelow 1 V
PKL e LSWE
(3 e 13)LG±B e W±B
Door key lock
and unlock
switch (LOCK)
Door key lock and unlock switch OFF or UNLOCK10 to 14 V
PKUL e LSWE
(2 e 13)LG±R e W±B
Door key lock
and unlock
switch (UN-
LOCK)
Door key lock and unlock switch UNLOCKBelow 1 V
PKUL e LSWE
(2 e 13)LG±R e W±B
Door key lock
and unlock
switch (UN-
LOCK)
Door key lock and unlock switch OFF or LOCK10 to 14 V
LSWP e LSWE
(4 e 13)R±Y e W±BDoor unlock
detection switchFront passenger's door is locked10 to 14 V
LSWP e LSWE
(4 e 13)R±Y e W±BDoor unlock
detection switchFront passenger's door is unlockedBelow 1 V
LSW e GND
(7 e 8)R±L e W±BWindow lock
switchWindow lock switch position UNLOCKBelow 1 V
LSW e GND
(7 e 8)R±L e W±BWindow lock
switchWindow lock switch position LOCK10 to 14 V
CTYB e PCYL
(6 e 5)R e R±WDoor courtesy
light (Front RH)Front passenger's door closed10 to 14 V
CTYB e PCYL
(6 e 5)R e R±WDoor courtesy
light (Front RH)Front passenger's door openBelow 1 V
LSWE e Body ground
(13 e Body ground)W±B e Body
groundGroundAlwaysBelow 1 V
SGND e Body ground
(18 e Body ground)W±B e Body
groundGroundAlwaysBelow 1 V
Symbols (Terminal No.)Wiring ColorTerminal De-
scriptionConditionSpecified Condition
MPX1 e ±
(20 e ±)B e ±Multiplex com-
munication lineMultiplex communication circuitPulse generation
SIG e GND
(21 e 13)B±R e W±BIgnition switchIgnition switch ON10 to 14 V

± DIAGNOSTICSPASSENGER DOOR CONTROL SYSTEM
DI±1821
2015 Author: Date:
2005 SEQUOIA (RM1146U) BDR e GND
(25 e 13)
L±Y e W±BBatteryAlways10 to 14 V
CPUB e GND
(23 e 13)W±R e W±BBatteryAlways10 to 14 V
LMT e SGND
(2 e 4)L±W e W±BPower window
limit switchFront passenger's door window not fully closedBelow 1 V
LMT e SGND
(2 e 4)L±W e W±BPower window
limit switchFront passenger's door window fully closed10 to 14 V
PLS e SGND
(3 e 4)L±R e W±BPower window
pulse sensorPower window is operatedPulse generation
SGND e Body ground
(4 e Body ground)W±B e Body
groundGroundAlwaysBelow 1 V
PU e PDN
(1 e 14)R e GPower window
motor (UP)Ignition switch ON and front passenger's window switch
OFFBelow 1 V
PU e PDN
(1 e 14)R e GPower window
motor (UP)Ignition switch ON and front passenger's window switch
UP10 to 14 V
PDN e PU
(14 e 1)G e RPower window
motor (DOWN)Ignition switch ON and front passenger's window switch
OFFBelow 1 V
PDN e PU
(14 e 1)G e RPower window
motor (DOWN)Ignition switch ON and front passenger's window switch
DOWN10 to 14 V
LSW e GND
(7 e 13)R±L e W±BWindow lock
switchWindow lock switch position UNLOCKBelow 1 V
LSW e GND
(7 e 13)R±L e W±BWindow lock
switchWindow lock switch position LOCK10 to 14 V
MPX2 e ±
(8 e ±)G±B e ±Multiplex com-
munication lineMultiplex communication circuitPulse generation
GND e Body ground
(13 e Body ground)W±B e Body
groundGroundAlwaysBelow 1 V
LSWP e LSWE
(24 e 9)R±Y e W±BDoor unlock
detection switchFront passenger's door is locked10 to 14 V
LSWP e LSWE
(24 e 9)R±Y e W±BDoor unlock
detection switchFront passenger's door is unlockedBelow 1 V
LSWE e Body ground
(9 e Body ground)W±B e Body
groundGroundAlwaysBelow 1 V
PKUL e GND
(10 e 13)LG±R e W±B
Door key lock
and unlock
switch (UN-
LOCK)
Door key lock and unlock switch UNLOCKBelow 1 V
PKUL e GND
(10 e 13)LG±R e W±B
Door key lock
and unlock
switch (UN-
LOCK)
Door key lock and unlock switch OFF or LOCK10 to 14 V
PKL e GND
(22 e 13)LG±B e W±B
Door key lock
and unlock
switch (LOCK)
Door key lock and unlock switch LOCKBelow 1 V
PKL e GND
(22 e 13)LG±B e W±B
Door key lock
and unlock
switch (LOCK)
Door key lock and unlock switch OFF or UNLOCK10 to 14 V
CTYB e PCYL
(5 e 6)R e R±WDoor courtesy
light (Front RH)Front passenger's door closed10 to 14 V

DI±1822
± DIAGNOSTICSPASSENGER DOOR CONTROL SYSTEM
2016 Author: Date:
2005 SEQUOIA (RM1146U) CTYB e PCYL
(5 e 6)
R e R±WDoor courtesy
light (Front RH)Front passenger's door openBelow 1 V
PVC e RE1
(11 e 12)GR±B e GR±
ROuter mirror
position sensorIgnition switch OFFBelow 1 V
PVC e RE1
(11 e 12)GR±B e GR±
ROuter mirror
position sensorIgnition switch ON4.8 to 5.2 V
VSSR e RE1
(18 e 12)GR±G e GR±
ROuter mirror
position sensorIgnition switch ON, outer mirror position full OUT0.5 to 1.8 V
VSSR e RE1
(18 e 12)GR±G e GR±
ROuter mirror
position sensorIgnition switch ON, outer mirror position full IN3.5 to 4.5 V
HSSR e RE1
(19 e 12)GR±L e GR±
ROuter mirror
position sensorIgnition switch ON, outer mirror position full DOWN0.5 to 1.8 V
HSSR e RE1
(19 e 12)GR±L e GR±
ROuter mirror
position sensorIgnition switch ON, outer mirror position full UP3.5 to 4.5 V
PM+R e GND
(15 e 13)L±W e W±BOuter mirror mo-
torRemote control mirror is not operatedBelow 1 V
PM+R e GND
(15 e 13)L±W e W±BOuter mirror mo-
torRemote control mirror is operated DOWN or RIGHT10 to 14 V
PMVR e GND
(17 e 13)LG±B e W±BOuter mirror mo-
torRemote control mirror is not operatedBelow 1 V
PMVR e GND
(17 e 13)LG±B e W±BOuter mirror mo-
torRemote control mirror is operated UP or RIGHT10 to 14 V
PMHR e GND
(16 e 13)LG±R e W±BOuter mirror mo-
torRemote control mirror is not operatedBelow 1 V
PMHR e GND
(16 e 13)LG±R e W±BOuter mirror mo-
torRemote control mirror is operated LEFT or DOWN10 to 14 V

DIDEU±01
± DIAGNOSTICSPASSENGER DOOR CONTROL SYSTEM
DI±1823
2017 Author: Date:
2005 SEQUOIA (RM1146U)
DATA LIST / ACTIVE TEST
1. DATA LIST
HINT:
According to the DATA LIST displayed by the hand±held tester, you can read the value of the switch, sensor,
actuator and so on without parts removal. Reading the DATA LIST as the first step of troubleshooting is one
of the methods to shorten labor time.
(a) Connect the hand±held tester to the DLC3.
(b) Turn the ignition switch ON.
(c) According to the display on the tester, read the DATA LIST.
P±DOOR:
ItemMeasurement Item/Dis-
play (Range)Normal conditionDiagnostic Note
P P/W AUTO SW
Front passenger power
window auto SW signal/
ON or OFFON: Front passenger power window auto UP/DOWN SW
is ON
OFF: Front passenger power window auto UP/DOWN SW
is OFF
±
LIMIT SWJam protection limit SW/
ON or OFFON: Window is almost fully open
OFF: Window is open*1
LOCK POS SWLock position SW signal/
ON or OFFON: Door lock is in unlock position
OFF: Door lock is in lock position±
*1: If the jam protection limit switch is turned ON, the jam protection function will stop.
Even if the switch is not turned ON when the windows are almost fully open, the window will not fully close
as jam protection operates at upper window positions during automatic±up operation.
HINT:
The following data list can be used when the power window is operated through manual±up operation during
the ACTIVE TEST.
ItemMeasurement Item/Display (Range)Normal conditionDiagnostic Note
GRASS POS±1/4
Detects things caught in the P/W / OK or
CAUTION
(Displayed during the active test)OK: Nothing caught in the range between
closed and 1/4 open*2
GRASS POS±1/2
Detects things caught in the P/W / OK or
CAUTION
(Displayed during the active test)OK: Nothing caught in the range between
1/4 open and 1/2 open*2
GRASS POS±3/4
Detects things caught in the P/W / OK or
CAUTION
(Displayed during the active test)OK: Nothing caught in the range between
1/2 open and 3/4 open*2
GRASS POS±OPEN
Detects things caught in the P/W / OK or
CAUTION
(Displayed during the active test)OK: Nothing caught in the range between
3/4 open and fully open*2
HINT:
*2: If the CAUTION is displayed without applying any resistance in each range, there must be something
caught somewhere in that range.
ItemMeasurement Item/Display (Range)Normal conditionDiagnostic Note
MIR POS SEN VVertical mirror position/Min.: 0, Max.: 5Within range from 0 to 5 V±
MIR POS SEN HVertical mirror position/Min.: 0, Max.: 5Within range from 0 to 5 V±

DI±1824
± DIAGNOSTICSPASSENGER DOOR CONTROL SYSTEM
2018 Author: Date:
2005 SEQUOIA (RM1146U)
2. ACTIVE TEST
HINT:
Performing the ACTIVE TEST using the hand±held tester allows the relay, VSV, actuator and so on to oper-
ate without parts removal. Performing the ACTIVE TEST as the first step of troubleshooting is one of the
methods to shorten labor time.
It is possible to display the DATA LIST during the ACTIVE TEST.
(a) Connect the hand±held tester to the DLC3.
(b) Turn the ignition switch ON.
(c) According to the display on the tester, perform the ACTIVE TEST.
P±DOOR:
ItemTest DetailsDiagnostic Note
P/W UP/DOWNDrive the P/W Motor UP/DOWN
During this ACTIVE TEST, jam protection,
caught detection can be monitored.
(Refer to the DATA LIST for details)
MIRR UP/DOWNMirror motor vertical operation UP/OFF/DOWN±
MIRR RIGHT/LEFTMirror motor horizontal operation RIGHT/OFF/
LEFT±

DI1PS±08
I28391
Power Window Motor

Pulse Sensor

Limit Switch
Door Courtesy Light Switch Power Window Switch Assembly

Passenger Door ECU

Door Lock Control Switch

Power Window Switch
Door Courtesy Light
Passenger door ECU is the same with Power Window Switch
Door Lock Assembly

Door Lock Motor

Door Unlock Detection
Switch Remote Control Mirror
(w/ Driving Position Memory)
Door Key Lock and
Unlock Switch
± DIAGNOSTICSPASSENGER DOOR CONTROL SYSTEM
DI±1825
2019 Author: Date:
2005 SEQUOIA (RM1146U)
PARTS LOCATION

DI1PQ±11
I28436
Instrument Panel J/B
BDR
CPUB
GND W±R
W±B
AW±R Engine Room J/B F10
Fusible Link BlockI18
Ignition SW
IF Battery BB 4 5ALT
8
W1L1AM1
121C6
17
1FW±L1 2 B±YIG1 AM1
1C4 ECU±IG
4
1F B±R AAJ/C
B±R
II27
B±R19
L±Y20
II23
L±Y
1
2D 2C8 SHORT PIN
ECU±B
Sub J/B No. 3
3D
3ASIG
PWR No. 2
Instrument Panel J/B
3
1J2
1E
11
II2
W±B J12
J/C12
8 6
II2 W±RFront Passenger Door ECU
W±R 11F18 J37
B±R
Sub J/B No. 3
3A 3C88J38 F18
F18 F18
F18 F18
F18 F1821
25
23
13 (*1) (*2)
(*1) (*2)
(*1) (*2)
(*1) (*2)
*1: w/ Driving Position Memory
*2: w/o Driving Position Memory DI±1826
± DIAGNOSTICSPASSENGER DOOR CONTROL SYSTEM
2020 Author: Date:
2005 SEQUOIA (RM1146U)
CIRCUIT INSPECTION
Power source circuit
CIRCUIT DESCRIPTION
This circuit provides power to operate the passenger door ECU.
WIRING DIAGRAM

± DIAGNOSTICSPASSENGER DOOR CONTROL SYSTEM
DI±1827
2021 Author: Date:
2005 SEQUOIA (RM1146U)
INSPECTION PROCEDURE
1 Check ECU±IG, AM1, PWR No. 5 and ECU±B fuse.
CHECK:
Check continuity of the ECU±IG, AM1, PWR No. 5 and ECU±B fuse.
OK:
Continuity
NG Replace the faulty fuse.
OK
2 Check voltage between terminals BDR, CPUB, SIG and GND of passenger door
ECU connector.
PREPARATION:
Turn the ignition switch ON.
CHECK:
Measure the voltage between terminals SIG and GND of the passenger door ECU of the wire harness side
connector.
OK:
Voltage: 10 to 14 V
PREPARATION:
(a) Turn the ignition switch OFF.
(b) Disconnect the passenger door ECU connector.
CHECK:
Measure the voltage between terminals BDR, CPUB and GND of the passenger door ECU of the wire har-
ness side connector.
OK:
Voltage: 10 to 14 V
OK Proceed to next circuit inspection shown in
problem symptoms table (See page DI±1818).
NG

DI±1828
± DIAGNOSTICSPASSENGER DOOR CONTROL SYSTEM
2022 Author: Date:
2005 SEQUOIA (RM1146U)
3 Check wire harness and connector between passenger door ECU and battery
(See page IN±35).
NG Repair or replace wire harness or connector.
OK
4 Check wire harness and connector between passenger door ECU and body
ground (See page IN±35).
NG Repair or replace wire harness or connector.
OK
Proceed to next circuit inspection shown in
problem symptoms table
(See page DI±1782).