key TOYOTA SEQUOIA 2009 2.G Navigation Manual

Page 125 of 273

OTHER FUNCTIONS
126
If a memo is added, the system informs of
the memo entry when the system is started
on the memo date. (See page 25.)
1. Push the “INFO” button.
2. Touch “Calendar”.
3. Touch the date you want to add a
memo on the “Calendar” screen.
5U5012F
4. Touch “Add Memo”.
Up to 100 memos can be added.
5U5013F
5. Touch “Memo”.
5U5014F
6. Enter text using the keys.
Up to 24 letters can be entered.
After entering the text, touch “OK” at the
bottom right of the screen.
5U5015F
7. When registering information on the
memo, touch “Location”.
A screen similar to the destination search
screen appears. Search the same way as
searching a destination. (See “Destination
search” on page 43.)
— Adding a memo

Page 127 of 273

OTHER FUNCTIONS
128
5U5019F
5. To delete and/or edit the memo,
touch the desired memo button.
“Delete All”: To delete all the displayed
memos.
A message will be displayed.
6. To delete, touch “Yes”. To cancel the
deletion, touch “No”.
To display memos for a specified pe-
riod of time
1. Touch “Period” on the “Memo
Search” screen.
5U5020F
2. Enter the period using the numeral
keys.
The period from January 1, 2005 through
December 31, 2024 can be set for search-
ing.
3. After setting the period, touch “OK”.
The “Memo List” screen will be displayed.

Page 134 of 273

OTHER FUNCTIONS
135
5U5026F
6. When this screen is displayed, input
the Passkey displayed on the screen
into the phone.
For the operation of the phone, see the
manual that comes with your cellular
phone.
If you want to cancel it, touch “Cancel”.
5U5027F
7. When the connection is completed,
this screen is displayed.
You do not need to enter the phone in case
of using the same one.
5U5028F
When this screen is displayed, follow the
guidance on the screen to try again.
Connecting a Bluetooth phone
(i) Automatically
5U5029F
When you register your phone, auto
connection will be turned on. Always
set it to this mode and leave the Blue-
tooth
 phone in a condition where con-
nection can be established.
Each time you touch “Auto Connect”,
auto connection will be switched on or off.
5U5030F
When the engine switch is turned to the
ACC or ON position, the selected Blue-
tooth
 phone will be automatically con-
nected and the connection result is dis-
played.
This screen appears when the Bluetooth

phone is first connected after the engine
switch is turned to the ACC or ON position.

Page 136 of 273

OTHER FUNCTIONS
137
After you enter the Bluetooth phone,
you can call by using handsfree sys-
tem. You can call using the 7 methods
described below.
(i) By dial
You can call by inputting the telephone
number.
This cannot be operated while driving.
5U5033F
1. Touch the desired key to input the
telephone number.
Each time you touch , an inputted digit is
deleted.
When you touch
, the number you
called last is inputted.
2. Touch
or push the switch of
the steering wheel. (ii) By phone book
You can call by phone book data which
is transferred from your cellular phone.
The system has one phone book. You
can register up to 1000 numbers.
This cannot be operated while driving.
5U5034F
1. Touch “Phone Book” to display
“Phone Book” screen.
5U5035F
2. Select the desired number from the
list.
5U5036F
3. Touch or push the switch of
the steering wheel.
— Call on the Bluetooth
phone

Page 143 of 273

OTHER FUNCTIONS
144
5U5053F
While you are talking on the phone, this
screen is displayed. You can do the op-
eration below on the screen.
To adjust the volume of the other party’s
voice: Touch
“–” or “+” or use the volume
switch of the steering wheel.
To hang up the phone: Touch
or push the switch of
the steering wheel.
To mute your voice: Touch “Mute”.
To input a Key: Touch “09”.
To transfer the call Touch “Transfer Call” .
You cannot change from Hands −free call
to cellular phone call while driving.
When you change from cellular phone call
to Hands− free call, the Hands −free screen
will be displayed and you can operate it on
the screen.
Transferring method and behavior are dif-
ferent depending on the cellular phone
which you have.
For the operation of the phone, see the
manual that comes with your cellular
phone.
5U5054F
Touch the desired number to input the key.
To hang up the phone: Touch
or push the switch of
the steering wheel.
This cannot be operated while driving.
— Talk on the Bluetooth
phone

Page 147 of 273

OTHER FUNCTIONS
148

Deleting all of the speed dial
5U5069F
1. Touch “Delete All” of “Speed Dial”.
5U5070F
2. Touch “Yes”.
(b) Registering the speed tone
You can
register the desired tone num-
ber. Up to 6 speed tone numbers can be
registered.
5U5071F
1. Touch “Register” of “Speed Tone”.
5U5072F
2. Use the software keyboard to input
the name.
5U5073F
3. Input the number and touch “OK”.

Page 148 of 273

OTHER FUNCTIONS
149
5U5074F
4. Touch the desired touchscreen
button you want to register in.
5U5075F
5. If you select a touchscreen button
you register before, this screen is dis-
played.
Touch “Yes” if you want to overwrite it.
Editing the speed tone.
You can edit the speed tone.
5U5076F
1. Touch “Edit” of “Speed Tone”.
5U5077F
2. Touch the touchscreen button you
want to edit.
5U5078F
3. Use the software keyboard to input
the name.

Page 156 of 273

OTHER FUNCTIONS
157

Registering the phone book data
You can register the phone book data.
5U5105F
1. Touch “Register” of “Phone Book”.
5U5106F
2. Touch the desired touchscreen
button to edit the phone book.
5U5107F
3. When you complete the edit, touch
“OK”.
Editing the name
When you don’t input the name, the
number is displayed on the list.
5U5108F
1. Touch “Name”.
5U5109F
2. Use the software keyboard to input
the name.

Page 163 of 273

OTHER FUNCTIONS
164

Selecting a group icon
5U5144F
1. Touch “Icon”.
5U5145F
2. Select the desired icon.
Editing a group name
5U5146F
1. Touch “Name”.
5U5147F
2. Use the software keyboard to input
the name.

Page 171 of 273

OTHER FUNCTIONS
172

Changing a device name
You can change a device name. If you
change a device name, the name regis-
tered in your cellular phone is not
changed.
5U5176F
1. Touch “Change”.
5U5177F
2. Use the software keyboard to input
the device name.
Changing the Bluetooth settings
You can change the display and settings of
Bluetooth
 information on the system.
The information displays the following
items.
Device Name The name in the Bluetooth
 net-
. . .
work. You can change it.
Passkey The password when you register
. . .
your cellular phone in the system.
You can change it into the figure of
4− 8 digits.
Bluetooth
∗ Device Address
The address peculiar to the system.
. . .
You cannot change it. If you have
registered two Bluetooth
 phones
with the same Device Name or
Passkey and you cannot distin-
guish one from the other, refer to it.
∗: Bluetooth is a registered trademark of
Bluetooth SIG. Inc.

Page:   < prev 1-10 11-20 21-30 next >