key TOYOTA SIENNA 2008 XL20 / 2.G Navigation Manual

OTHER FUNCTIONS
158
Changing a Device Name
You can change a Device Name. If you
change a Device Name, the name regis-
tered in your cellular phone is not
changed.
1. Touch “Change”.
2. Use the software keyboard to input the
Device name.
Changing the Bluetooth settings
You can change the display and settings of
Bluetooth information on the system.
The information displays the following items.
Device Name The name in the. . . .
Bluetooth network. You
can change it.
Passkey The password when you . . . . . . . . .
register your cellular
phone in the system. You
can change it into the fig-
ure of 4−8 digits.
Bluetooth
∗ Device Address
The address peculiar to . . . . . . . . . . . . .
the system. You can not
change it. If you have
registered two
Bluetooth phones with
the same Device Name
or Passkey and you
cannot distinguish one
from the other, refer to it.When you change the Device Name or
Passkey, do the followings.1. Touch “Bluetooth∗”.
2. Touch “Change” of “Device Name” or
“Passkey”.
∗: Bluetooth is a registered trademark of
Bluetooth SIG. Inc.

OTHER FUNCTIONS
159
3. Use the software keyboard to input the
Device Name.
You can input up to 20 characters.
4. Input a Passkey with 4 8 digits.
When you touch , the inputted number is
deleted.
5. When you complete the setting, touch
.
Initializing the Bluetooth settings
You can initialize the settings.
1. Touch “Default”.
2. Touch “Yes”.

Finish
AUDIO/VIDEO SYSTEM
203
DISPLAYING DVD CONTROLS
If you touch a part of the screen, where con-
trols are not located while watching video,
DVD controls will appear.
“Page2”: Touching this will display on the
second page of DVD controls.
“Page1”: Touching this will display the top
page of DVD controls.“Hide Buttons”: Touching this will turn off the
controls from the screen.
If “
” appears on the screen when you touch
a control, the operation relevant to the control
is not permitted.
DESCRIPTION OF DVD CONTROLS
Top page of DVD video controls
“Menu” and “Top Menu”: If you touch any
of the above controls, the menu screen for
DVD video appears. (For the operation, see
the manual that come with the DVD video disc
provided separately.)
: The menu control key appears on the
screen. (See page 204.)
: Touching this will pause the video
screen. When you touch this again, the video
screen advances frame by frame.
: Touching this will fast reverse during
playback.

: Touching this will stop the video screen.
: Touching this will pause during playback
and resume normal play during pause or slow
forward.
: Touching this will fast forward during
playback and forward slowly during pause.
Second page of DVD video controls
“Setup”: The initial set up screen appears.
(See page 206.)
“Search”: The title search screen appears.
(See page 204.)
“Return”: Touching this will display the pre-
determined scene and start playing from
there.
“AUDIO”: The audio changing screen ap-
pears. (See page 205.)
“Subtitle”: The subtitle changing screen ap-
pears. (See page 204.)
“Angle”: The angle selection screen ap-
pears. (See page 205.)

6
15“MENU” button
Push this button to display the “Menu”
screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8, 84, 234
16Distance and time to destination
Displays the distance, the estimated travel
time to the destination, and the estimated ar-
rival time at the destination. . . . . . . . . . . . . .
70
17“GPS” mark (Global Positioning
System)
Whenever your vehicle is receiving signals
from the GPS, this mark is displayed.
222 . . . . . .
18Speech command system indicator
This indicator is shown by pushing the talk
switch. The speech command system can
be operated while this indicator is shown.
161 . . . . . .
The “Destination” screen allows you to search for a destination. To display the “Destination”
screen, push the “DEST” button.
1“Address”
A house number and the street address can
be input by using the input keys. . . . . . . . . .
45
2“POI Name”
Select one of the many POIs (Points of Inter-
— “Destination” screen
0U5040

10
1“Distance”
The distance units “km” or “miles” can be
selected. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
100
2“Estimated Travel Time”
The system to display the travel time and the
arrival time to the destination on the route
guidance screen can be set. . . . . . . . . . . . .
101
3“Keyboard Layout”
Key layout can be changed. . . . . . . . . . . . . .
102
4“Time Zone”
The desired time zone can be selected.
102 . . . . . .
5“ Function”
The choice whether to display each touch
screen button and current street name on the
map screen can be set. . . . . . . . . . . . . . . . . .
103
6“Display POI Icons”
A selection of 6 icons displayed on the “Dis-
play POI Icons” top screen is possible.
104 . . . . . .
7“Display Building Shapes”
Selection of either ON or OFF to display the
building shape on the map screen is pos-
sible. 104
8“Traffic Restrict. Notification”
Notification of seasonal restrictions can be
selected. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
105
9“Voice Recognition Guidance”
Voice recognition guidance can be set.
105 . . . . . .
10“Voice Guidance in All Modes”
Voice guidance can be set in all modes.
105 . . . . . .
11“Auto Voice Guidance”
Automatic voice guidance can be set.
106 . . . . . .
12“Popup Message”
Selection of either ON or OFF to display the
pop−up message is possible. . . . . . . . . . . . .
106
13“Calibration”
Adjustment of the current vehicle position
mark can be done manually, or mis−calcula-
tion by changing tire will be adjusted.
107 . . . . . .
14“Default”
This touch screen button initializes all of the
settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
100
15“?”
Function help for the “Setup” screen can be
viewed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
26
0U5100