engine coolant TOYOTA tC 2007 Warranties & Maintenance Guides (in English)

5
Maintenance Log: 2007 tC ‹‹
1Reset the oil replacement reminder (“MAINT REQD”) light after replacing engine oil.2Perform these service items only if you drive primarily under the conditions indicated.3See page 21 for details.
15,000 Miles or 18 Months
Replace engine oil and oil filter1
Rotate tires
Visually inspect brake linings/drums and brake pads/discs
Inspect the following:__Ball joints and dust covers
__ Brake lines and hoses
__ Drive shaft boots
__ Engine coolant
3
Additional Maintenance Items for Special Operating Conditions2
Driving on dirt roads or dusty roads:
Inspect engine air filter
Tighten nuts and bolts on chassis
__ Exhaust pipes and mountings
__ Radiator core and condenser
__ Steering gear box
__ Steering linkage and boots
Dealer Service Verification:
Date:
Mileage:

7
Maintenance Log: 2007 tC ‹‹
1Reset the oil replacement reminder (“MAINT REQD”) light after replacing engine oil.2Perform these service items only if you drive primarily under the conditions indicated.3Inspect thickness measurement and disc runout.4See page 21 for details.
30,000 Miles or 36 Months
Replace engine oil and oil filter1
Rotate tires
Replaceengine air filter
Inspect the following:__ Ball joints and dust covers
__ Brake lines and hoses
__ Brake linings/drums and
brake pads/discs
3
__ Differential oil
__ Drive shaft boots
__ Engine coolant
4
__ Exhaustpipes and mountings
Additional Maintenance Items for Special Operating Conditions2
Driving on dirt roads or dusty roads:
Tighten nuts and bolts on chassis
Dealer Service Verification:
Date:
Mileage:
__ Fuel lines and connections, fuel
tank band and fuel tank vapor vent
system hoses
__ Fuel tank cap gasket
__ Radiator core and condenser
__ Steering gear box
__ Steering linkage and boots
__ Transmission fluid or oil

9
Maintenance Log: 2007 tC ‹‹
1Reset the oil replacement reminder (“MAINT REQD”) light after replacing engine oil.2Perform these service items only if you drive primarily under the conditions indicated.3See page 21 for details.
45,000 Miles or 54 Months
Replace engine oil and oil filter1
Rotate tires
Visually inspect brake linings/drums and brake pads/discs
Inspect the following:__ Ball joints and dust covers
__Brake lines and hoses
__ Drive shaft boots
__ Engine coolant
3
Additional Maintenance Items for Special Operating Conditions2
Driving on dirt roads or dusty roads:
Inspect engine air filter
Tighten nuts and bolts on chassis
Dealer Service Verification:
Date:
Mileage:
__ Exhaust pipes and mountings
__ Radiator core and condenser
__ Steering gear box
__ Steering linkage and boots

11
Maintenance Log: 2007 tC ‹‹
1Reset the oil replacement reminder (“MAINT REQD”) light after replacing engine oil.2Perform these service items only if you drive primarily under the conditions indicated.3Inspect thickness measurement and disc runout.4Initial inspection at 60,000 miles/72 months. Inspect every 15,000 miles/18 months thereafter.5See page 21 for details.
60,000 Miles or 72 Months
Replace engine oil and oil filter1
Rotate tires
Replace engine air filter
Inspect the following:__Ball joints and dust covers
__ Brake lines and hoses
__ Brake linings/drums and
brake pads/discs
3
__ Differential oil
__ Drivebelts4
__ Drive shaft boots
__ Engine coolant5
__ Engine valve clearance
Additional Maintenance Items for Special Operating Conditions2
Driving on dirt roads or dusty roads:
Tighten nuts and bolts on chassis
Dealer Service Verification:
Date:
Mileage:
__ Exhaust pipes and mountings
__ Fuel lines and connections, fuel
tank band and fuel tank vapor
vent system hoses
__ Fuel tank cap gasket
__ Radiator core and condenser
__ Steering gear box
__ Steering linkage and boots
__ Transmission fluid or oil

13
Maintenance Log: 2007 tC ‹‹
1Reset the oil replacement reminder (“MAINT REQD”) light after replacing engine oil.2Perform these service items only if you drive primarily under the conditions indicated.3See page 21 for details.
75,000 Miles or 90 Months
Replace engine oil and oil filter1
Rotate tires
Visually inspect brake linings/drums and brake pads/discs
Inspect the following:
__ Ball joints and dust covers
__Brake lines and hoses
__ Drive belts
__ Drive shaft boots
__ Engine coolant
3
Additional Maintenance Items for Special Operating Conditions2
Driving on dirt roads or dusty roads:
Inspect engine air filter
Tighten nuts and bolts on chassis
Dealer Service Verification:
Date:
Mileage:
__Exhaust pipes and mountings
__ Radiator core and condenser
__ Steering gear box
__ Steering linkage and boots

15
Maintenance Log: 2007 tC ‹‹
1Reset the oil replacement reminder (“MAINT REQD”) light after replacing engine oil.2Perform these serviceitems onlyif you drive primarily under the conditions indicated.3Inspect thicknessmeasurement and disc runout.4See page 21 for details.
90,000 Miles or 108 Months
Replace engine oil and oil filter1
Rotate tires
Replace engine air filter
Inspect the following:__ Ball joints and dust covers
__ Brake lines and hoses
__ Brake linings/drums and
brake pads/discs
3
__ Differential oil
__ Drivebelts
__ Drive shaft boots__ Engine coolant
4
__ Exhaustpipes and mountings
Additional Maintenance Items for Special Operating Conditions2
Driving on dirt roads or dusty roads:
Tighten nuts and bolts on chassis
Dealer Service Verification:
Date:
Mileage:
__ Fuel lines and connections, fuel
tank band and fuel tank vapor vent
system hoses
__ Fuel tank cap gasket
__ Radiator core and condenser
__ Steering gear box
__ Steering linkage and boots
__ Transmission fluid or oil

16
›› Maintenance Log: 2007 tC
95,000 Miles or 114 Months
Replace engine oil and oil filter1
Rotate tires
Visually inspect brake linings/drums
and brake pads/discs
Additional Maintenance Items for
Special Operating Conditions2
Driving on dirt roads or dusty roads:
Inspect ball joints and dust covers
Inspect drive shaft boots
Inspect engine air filter
Inspect steering linkage and boots
Tighten nuts and bolts on chassis
100,000 Miles or 120 Months
Replace engine oil and oil filter1
Replace engine coolant3
Rotate tires
Visually inspect brake linings/drums
and brake pads/discs
Additional Maintenance Items for
Special Operating Conditions2
Driving on dirt roads or dusty roads:
Inspect ball joints and dust covers
Inspect drive shaft boots
Inspect engine air filter
Inspect steering linkage and boots
Tighten nuts and bolts on chassis
Dealer ServiceVerification:
Date: Mileage: Dealer ServiceVerification:
Date: Mileage:

17
Maintenance Log: 2007 tC ‹‹
1Reset the oil replacement reminder (“MAINT REQD”) light after replacing engine oil.2Perform these service items only if you drive primarily under the conditions indicated.3Initial replacement at 100,000 miles/120 months. Replace every 50,000 miles/60 months
thereafter. See page 21 for additional information.
4See page 21 for details.
105,000 Miles or 126 Months
Replace engine oil and oil filter1
Rotate tires
Visuallyinspect brake linings/drums and brake pads/discs
Inspect the following:__ Ball joints and dust covers
__ Brake lines and hoses
__ Drivebelts
__ Drive shaft boots __ Engine coolant
4
Additional Maintenance Items for Special Operating Conditions2
Driving on dirt roads or dusty roads:
Inspect engine air filter
Tighten nuts and bolts on chassis
Dealer Service Verification:
Date:
Mileage:
__Exhaustpipes and mountings
__ Radiator core and condenser
__ Steering gear box
__ Steering linkage and boots

19
Maintenance Log: 2007 tC ‹‹
1Reset the oil replacement reminder (“MAINT REQD”) light after replacing engine oil.2Perform these service items only if you drive primarily under the conditions indicated.3Required under the terms of the Emission Control Warranty.4Inspect thickness measurement and disc runout.5See page 21 for details.
120,000 Miles or 144 Months
Replace engine oil and oil filter1
Rotate tires
Replace engine air filter
Replace spark plugs3
Inspect the following:__ Ball joints and dust covers
__Brake lines and hoses
__ Brake linings/drums and
brake pads/discs
4
__ Differential oil
__ Drive belts
__ Drive shaft boots__Engine coolant
5
__Engine valve clearance
Additional Maintenance Items for Special Operating Conditions2
Driving on dirt roads or dusty roads:
Tighten nuts and bolts on chassis
Dealer Service Verification:
Date:
Mileage:
__ Exhaust pipes and mountings
__ Fuel lines and connections, fuel
tank band and fuel tank vapor
vent system hoses
__ Fuel tank cap gasket
__ Radiator core and condenser
__ Steering gear box
__ Steering linkage and boots
__ Transmission fluid or oil

Drive Shaft Boots
Check the drive shaft boots and clamps for cracks, deterioration
and damage. Replace any deteriorated or damaged parts and, if
necessary, repack the grease. A qualified technician should perform
these operations.
Engine Air Filter
Replace at specified intervals. When performing inspections, check
for damage, excessive wear and oiliness, and replace if necessary.
Engine Coolant
Drain and flush the cooling system and refill with an ethyleneglycol
type coolant. Inspect the radiator, condenser and/or intercooler for
leaves, dirt and insects and clean if necessary. Inspect hoses and con
nections for corrosion and leaks. Tighten connections and replace parts
as necessary.A qualified technician should perform these operations.
(For further details, refer to “Radiator, Condenser and Hoses” in the
“Vehicle Maintenance and Care” section of the
Owner’s Manual.)
Note:Your Scion is equipped with Genuine Toyota Super LongLife
Coolant. The replacement intervals for engine coolant recommended
in this booklet are based on replacement with Genuine Toyota Super
LongLife Coolant or similar highquality nonsilicate, nonamine,
nonborate ethyleneglycol coolant with longlife hybrid organic acid
technology (i.e., a combination of low phosphates and organic acids). If
another type of ethyleneglycol coolant is used, replacement intervals
may be different.
Engine Oil and Oil Filter
Replacethe oil filter and drain and refill the engine oil at specified
intervals. For recommended oil grade and viscosity, refer to the
Owner’s Manual.
Engine Valve Clearance
Check for tappet noise and engine vibration and adjust if necessary.
A qualified technician should perform this operation.
Exhaust Pipes and Mountings
Visually inspect the exhaust pipes, muffler and hangers for cracks,
deterioration and damage. Start the engine and listen carefully for
any exhaustgas leakage. Tighten connections or replace parts as
necessary.
21
Explanation of Maintenance Items ‹‹