ECU TOYOTA xB 2012 Accessories, Audio & Navigation (in English)
Page 30 of 76
30
<CRB3643-A/S>30
About handling the
iPod
• This unit supports only an iPod fea-turing the Dock connector port.
• Operations may vary depending on
the software version of iPod.
• The iPod Equalizer set by the iPod
is forcibly turned off.
• The Shuffle function of the iPod is
operated as Random on this unit.
CAUTION
Store the data into another
media, to avoid losing the
data during iPod operation
with this unit.
Do not allow direct sunlight
to fall on the iPod when it is
not being used. Extended
exposure to direct sunlight
can result in iPod malfunction
due to the resulting high
temperatures.
Do not leave the iPod in
high temperatures or direct
sunlight.
Fix the iPod securely when
using with this unit. Do not
let the iPod fall onto the floor,
where it may become jammed
under the brake or accelerator
pedal.
•
•
•
•
For details, refer to the User Guide of your iPod.
About iPod software version
The iPod software versions that can be used with this unit are as follows (operations verified as of October 2010):
•
iPod (5th generation)ver. 1.3
iPod classicver. 1.1.2
iPod classic 120 GBver. 2.0.1
iPod classic 160 GBver. 2.0.4
iPod nano
(1st generation)ver. 1.3.1
iPod nano
(2nd generation)ver. 1.1.3
iPod nano
(3rd generation)ver. 1.1.3
iPod nano
(4th generation)ver. 1.0.4
iPod nano
(5th generation)ver. 1.0.2
iPod nano
(6th generation)ver. 1.0
iPod touch
(1st generation)iOS3.1.3
iPod touch
(2nd generation)iOS4.1
iPod touch
(3rd generation)iOS4.1
iPod touch
(4th generation)iOS4.1
iPhoneiOS3.1.3
iPhone 3GiOS4.1
iPhone 3GSiOS4.1
iPhone 4iOS4.1
* Please note that no guarantee applies to iPod operations and future updated versions of iPod software.
Page 37 of 76
37
<CRB3643-A/S>37
Registering Bluetooth Audio
Device
There are two methods for register-ing Bluetooth audio device to this system, both of which are explained below. If another Bluetooth audio device has already been connected, you will need to cancel this connection prior to beginning the registration process.You will mainly be working with your Bluetooth audio device to register it with the system. For details, see the user manual for your Bluetooth audio device.
Sending your pass key for registration
1. Touch [
] d [Bluetooth] d
[Connect Audio Player] d [Add
New]. If a device has already been
connected, a screen will appear
seeking confirmation of whether
this connection is to be cancelled
or not. Touch [YES].
2. Using the Bluetooth audio, search
for the Bluetooth- enabled device
and then select this unit ([CAR
MULTIMEDIA]).
3. Send the Passkey that appears
on the screen from the Bluetooth
audio device to the system.
If the Passkey has been sent
correctly, Bluetooth audio will
register it to the system and it will
be connected.
•Registering via SSP (Secure Simple Pairing)
1. Touch [
] d [Bluetooth] d
[Connect Audio Player] d [Add
New]. If a device has already been
connected, a screen will appear
seeking confirmation of whether
this connection is to be cancelled
or not. Touch [YES].
2. Using the Bluetooth audio, search
for the Bluetooth- enabled device
and then select this unit ([CAR
MULTIMEDIA]). • For some types of devices and authentication methods, number authentication or other means of verification may be required.
• Bluetooth 2.0 or higher is required
Connecting a Bluetooth Audio DeviceOnce the Bluetooth audio device is registered to the System, connec-tion takes place automatically. Up to five Bluetooth audio devices can be registered on the system. You can select the device that you want to listen to and it will be connected.Touch [] d [Bluetooth] d [Connect Audio Player] to display a list of devices. Touch the Bluetooth audio device that you want to connect.
Selecting Files
Any of the methods used below can be used to select Bluetooth audio files.
Selecting the previous/next fileTouch [] to return to the begin-ning of the file that is being played back. Touch [] again to play back the previous file. Touch [] to play back the next file.
A quick method for selecting the
previous/next fileTouch [] to change the MULTI SELECTOR to TUNE mode, then turn MULTI SELECTOR to the left to begin playback of the previous file. Turning MULTI SELECTOR to the right will begin playback of the next file.• If the volume changes when you turn the MULTI SELECTOR, touch [] and then turn the MULTI SELECTOR back and forth.
•
Page 57 of 76
57
<CRB3643-A/S>57
Sending your pass key for registration
1. Touch [] d [Bluetooth] d [Connect Phone] d [Add New]. If a device has already been connected, a screen will appear seeking confirmation of whether this connection is to be cancelled or not. Touch [YES].
2. Using the Bluetooth cell phone,
search for the Bluetooth- enabled device and then select this unit ([CAR MULTIMEDIA]).
3. Send the Passkey that appears on
the screen from the Bluetooth cell phone to the system.
If the Passkey has been sent
correctly, Bluetooth cell phone will register it to the system and it will be connected.
Registering via SSP (Secure Simple Pairing)
1. Touch [] d [Bluetooth] d [Connect Phone] d [Add New]. If a device has already been connected, a screen will appear seeking confirmation of whether this connection is to be cancelled or not. Touch [YES].
2. Using the Bluetooth cell phone,
search for the Bluetooth- enabled device and then select this unit ([CAR MULTIMEDIA]). • For some types of devices and authentication methods, number authentication or other means of verification may be required.
• Bluetooth 2.0 or higher is required
Page 73 of 76
73
<CRB3643-A/S>73
When problems occur with the XM tuner or HD Radio broadcast, a message will appear on the display. Refer to
the table below to identif y the problem, then take the suggested corrective action.
Check Antenna
The XM antenna is not connected.Check whether the XM antenna cable is attached securely.
A short-circuit occurring in the antenna or the surrounding antenna cable.Make sure that there is nothing unusual with the antenna or antenna cable.
No Signal
XM signal is too weak at the current location.Wait until your vehicle reaches a location with a stronger signal.
Even if SPS is received when HD Radio is not active, it doesn't sound it.Touch [HD Radio] to activate HD Radio.
Off AirThe channel you selected is not broadcasting any programming.Select another channel.
UpdatingThe unit is updating the encryption code.Wait until the update is finished.
The maximum of 50 HD Radio tags
have been stored.
Please connect your iPod to transfer
these tags before storing more tags
Because the HD radio tags saved in this unit had already been saved up to the number (50), the HD radio tags was not able to be saved though [Tag] was touched when iPod was unconnected.
Storing tag information.
Please wait...
Unit is acquiring the HD radio tags.Wait until the unit has saved the HD radio tags.
The XM Listener Care Center is also available on the phone, please call (800)-967-346 during the following hours:
Mon - Sat: 8 AM - 11 PM EST Sun: 8 PM - 8 PM EST