display TOYOTA xD 2011 Accessories, Audio & Navigation (in English)

OTHER FUNCTIONS
137
V573_E

After you enter the Bluetooth® phone,
you can call by using hands-free sys-
tem. You can call using the 6 meth-
ods described below.
z By key pad
You can call by inputting the tele-
phone number.
This cannot be operated while driving.

Touch the desired key to input the
telephone number.
Each time you touch ◄, an inputted digit
is deleted.
When you touch
, the number
you called last is inputted.
Touch the off-hook button (
) on the
screen. z
By phone book
You can call by phone book data
which is transferred from your cellular
phone.
The system has one phone book.
You can register up to 1000 numbers.
This cannot be operated while driving.

1. Touch “Phone Book” to display
the “Phone Book” screen.

2. Select the desired number from
the list.

Touch the off-hook button () on the
screen.


— Call on the Bluetooth®
phone

OTHER FUNCTIONS

138
V573_E
z By dialed numbers
You can call by dialed number. The
system memorizes up to 5 dialed
numbers. If there are more than 5,
the oldest number is deleted.
This cannot be operated while driving.

1. Touch “Call Log” to display the
“Outgoing Calls” screen.

z When you call by phone book, the
name (if registered) is displayed.
z When you call the same number
continuously, only the newest num-
ber is registered.
2. Select the desired number from
the list.

Touch the off-hook button () on the
screen.

OTHER FUNCTIONS
139
V573_E

z By received calls
You can call by received calls. When
a call is received, the system memo-
rizes up to 5 numbers. If there are
more than 5, the oldest number is
deleted.
This cannot be operated while driving.

1. Touch “Call Log” to display the
“Outgoing Calls” screen.

2. Touch “Incoming Calls” to display
the “Incoming Calls” screen.

z When a telephone number regis-
tered in the phone book is received,
the name and the number are dis-
played.
z Received calls which you did not
answer are also memorized in the
system and “ Abs.” is displayed on
the left side of the number.
z Received calls which you refused
are also memorized in the system
and “
” is displayed on the left side
of the number.
z Unrecognized telephone number
such as a public telephone is not
memorized in the system.
3. Select the desired number from
the list.

Touch the off-hook button () on the
screen.
z An international phone call may not
be made depending on the cellular
phone which you have.

OTHER FUNCTIONS

140
V573_E
z By speed dial
You can call by registered telephone
number which you selected from a
phone book, dialed numbers and re-
ceived calls. (See “(a) Registering
the speed dial” on page 144 for regis-
tering the speed dial.)

1. Touch “Speed Dial” to display the
“Speed Dial” screen.

2. Touch the desired number to call.
You can change the page by touching
“Speed Dial 2” or “Speed Dial 3”.
When you push the teleph one button
while driving, the screen above appears.
Touch the desired name to call. (The
telephone number is not displayed.) z
By POI call

You can call by touching when it
is displayed on the screen from navi-
gation system. (See page 30 for de-
tails.)

OTHER FUNCTIONS
141
V573_E


When a call is received, this screen is
displayed with a sound. Touch

to talk on the phone.
To hang up the phone:
Touch the on-hook button (
) on
the screen.
To refuse to receive the call: Touch
and hold it.
To adjust the volume of received call:
Touch
“–” or “+” or use the vol-
ume switch of the steering wheel.
On the international phone call, the other
party’s name may not be displayed cor-
rectly depending on the cellular phone
which you have.


While you are talking on the phone,
this screen is displayed. You can do
the operation below on the screen.
To adjust the volume of the other party’s
voice:
Touch
“–” or “+” or use the vol-
ume switch of the steering wheel.
To hang up the phone:
Touch the on-hook button (
) on
the screen.
To mute your voice: Touch “Mute” .
To input a Key: Touch “0-9”.
To transfer the call: Touch “Transfer Call” .
You cannot change from Hands −free call
to cellular phone call while driving.
When you change from cellular phone
call to Hands-free call, the Hands-free
screen will be displayed and you can
operate it on the screen.
Transferring method and behavior are
different depending on the cellular phone
which you have.
For the operation of the phone, see the
manual that comes with your cellular
phone.

— Receive on the
Bluetooth
® phone
— Talk on the Bluetooth
®
phone

OTHER FUNCTIONS

142
V573_E

Touch the desired number to input the
key.
To hang up the phone:
Touch the on-hook button (
) on
the screen.
This cannot be operated while driving.

If the continuous tone signal is regis-
tered in a phone book, this screen
appears. (If not registered, “Send”
and “Exit” are not displayed.)
Confirm the number displayed on the
screen and touch “Send”. The num-
ber before marked sign will be sent.
When you touch “Exit”, this function will
be finished and normal tone screen ap-
pears.
To hang up the phone:
Touch the on-hook button (
) on
the screen.
The continuous tone signal is the marked
sign (p or w) and the number following
telephone number.
(ex. 056133w0123p#1 ∗)
You can do this operation when you
want to operate an answering machine
or use a telephone service in bank for
example. You can register the phone
number and the code number in the
phone book.

OTHER FUNCTIONS
143
V573_E

z Sending a tone by the speed tone
You can send a tone by the speed
tone. (For registering the speed tone,
see “(b) Registering the speed tone”
on page 146.)

1. Touch “Speed Tone”.

2. Touch the desired touch screen
button to send a tone.

Touch “Settings” to display the “Set-
tings” screen.

You can change the settings of the
phone.


— Change the settings of
the Bluetooth
®phone

OTHER FUNCTIONS

144
V573_E
(a) Registering the speed dial
You can register the desired tele-
phone number from phone book, di-
aled numbers and received calls. Up
to 17 speed dial numbers can be reg-
istered.
The 6th entry is the speed dial for redial-
ing.

1. Touch “Speed Dial” to display the
“Speed Dial Settings” screen.

2. Touch “Register” of “Speed Dial”.

3. Select the data you want to regis-
ter.

4. Touch the desired telephone
number.

5. Touch the touch screen button
you want to register in.
The latest dialed number is registered in
the 6th item (speed redial).

If you select a touch screen button
you registered before, this screen is
displayed.
6. Touch “Yes” if you want to over-
write it.

OTHER FUNCTIONS

146
V573_E
(b) Registering the speed tone
You can register the desired tone
number. Up to 6 speed tone numbers
can be registered.

1. Touch “Register” of “Speed
Tone”.

2. Use the software keyboard to in-
put the name.

3. Input the number and touch “OK”.


4. Touch the desired touch screen
button you want to register in.

If you select a touch screen button
you registered before, this screen is
displayed.
5. Touch “Yes” if you want to over-
write it.

INFORMATION
If you often use a certain set of tone
signals, you can register that set of
code as a speed tone number to al-
low a one-touch operation during
calls.

OTHER FUNCTIONS
149
V573_E

(c) Setting the volume

1. Touch “Volume” to display the
“Volume Settings” screen.

2. Touch “-” or “+” to adjust the
“Voice Volume” or “Ring Volume”.
“Voice Volume” ..... Adjusting the other party’s voice.
“Ring Volume” ....... Adjusting the ring volume. z
Automatic volume settings for
high speed
You can set the volume one step up
when the speed is over 50 mph (80
km/h). (When it is under 43 mph (70
km/h), previous volume is back.)
Each time you touch “Adaptive Volume
Control” , you can switch on or off.