change wheel TOYOTA xD 2013 Accessories, Audio & Navigation (in English)

54
1. AUDIO SYSTEM OPERATION
9. STEERING SWITCHES
zThe actual design and button position will
differ depending on the vehicle. For
details, refer to vehicle “Owner’s Manual”.
zDetails of the specific switches, controls,
and features are described below.
zSteering switches are not equipped on
FR-S.
Volume control switch
zPress the “+” side to increase the volume.
The volume continues to increase while
the switch is being pressed.
zPress the “-” side to decrease the vol-
ume. The volume continues to decrease
while the switch is being pressed. “” “” switch
XRadio
To select a preset station: Press the
“”
or “ ”
switch.
To seek a radio station: Press and hold
the
“” or “” switch until you hear a beep.
If you press either the
“” or “” switch in
seek mode, the seek mode will be can-
celled.
XCD player
To select a desired track or file: Press
the
“” or “” switch.
To select a desired folder (MP3/WMA):
Press and hold the
“” or “” switch until
you hear a beep.
XiPod
To select a desired song: Press the “ ”
or “ ” switch.
XUSB memory
To select a desired file: Press the
“” or
“”
switch.
To select a desired folder: Press and
hold the
“” or “” switch until you hear a
beep.
XBluetooth
® audio player
To select a desired track: Press the
“”
or “ ”
switch.
To select a desired album: Press and
hold the
“” or “” switch until you hear a
beep.
“MODE” switch
zPress the “MODE” switch to select an
audio mode. Each press changes the
mode sequentially if the desired mode is
ready to use.
zTo turn the audio system on, press the
“MODE” switch.
zPress and hold the “MODE” switch until
you hear a beep and the music will pause
or be muted. By the same operation, it is
released.
Some parts of the audio system can be
adjusted with the switches on the
steering wheel.
STEERING SWITCHES (WITH
TWO DIRECTION STEERING
SWITCH)
No.Switch
Volume control switch
“” “” switch
“MODE” switch

78
1. Bluetooth® HANDS-FREE SYSTEM OPERATION
6. TALK ON THE Bluetooth® PHONE
To adjust the volume of the other par-
ty’s voice: Touch “-” or “+”, turn the
“PWR/VOL” knob, or use the volume
switch on the steering wheel.
To hang up the phone: Touch .
To mute your voice: Touch “Mute”.
To input a Key: Touch “0-9”.
To transfer the call: Touch “Handsfree
Mode” or “Handset Mode”.
1Enter a number by touching the num-
ber keys.
To hang up the phone: Touch .
zIf the continuous tone signal is registered
in a phonebook, this screen appears. (If
not registered, “Send” and “Exit” are not
displayed.)
zConfirm the number displayed on the
screen and touch “Send”. The number
before marked sign will be sent.
zWhen you touch “Exit”, this function will
be finished and normal tone screen
appears.
To hang up the phone: Touch .
While you are talking on the phone,
this screen is displayed. You can do
the operation below on the screen.
INFORMATION
●When you change from cellular phone
call to Hands-free call, the Hands-free
screen will be displayed and you can
operate it on the screen.
WHEN YOU TOUCH “0-9”
INFORMATION
●The continuous tone signal is the
marked sign (p or w) and the number fol-
lowing phone number. (ex.
056133w0123p#1∗)
●You can do this operation when you
want to operate an answering machine
or use a telephone service in bank for
example. You can register the phone
number and the code number in the
phonebook.