lock TOYOTA YARIS 2019 (in English) Repair Manual

145
YARIS SEDAN_OM_OM99S50z_(U)
3When Driving
3-1. Start/Stop EngineIgnition Switch ................... 146
Starting the Engine ........... 148
Turning the Engine Off ...... 153
3-2. Combination Meter and Display
Meters and Gauges .......... 154
Warning/Indicator Lights .............................. 162
3-3. Transaxle Manual Transaxle Operation ........................ 166
Automatic Transaxle Controls........................... 170
3-4. Switches and Controls Lighting Control ................. 181
Fog Lights ......................... 188
Turn and Lane-Change Signals ............................ 189
Windshield Wipers and Washer..................... 191
Rear Window Defogger ......................... 196
Hazard Warning Flasher ............................ 197
3-5. Brake Brake System .................... 198
Hill Launch Assist (HLA) ... 202 3-6. ABS/TCS/DSC
Antilock Brake System (ABS) .............................. 204
Traction Control System (TCS) .............................. 205
Dynamic Stability Control (DSC) .............................. 207
3-7. Fuel Economy Monitor Fuel Economy Monitor ...... 210
3-8. Drive Selection Drive Selection (Automatic Transaxle) ..... 213
3-9. Power Steering Power Steering ................. 215
3-10. Active Safety System Active Safety System ........ 216
Smart City Brake Support (SCBS)............................ 217
Laser Sensor..................... 223
3-11. Cruise Control Cruise Control ................... 225
3-12. Tire Pressure Monitoring System
Tire Pressure Monitoring System ............................ 230
3-13. Rear View Monitor Rear View Monitor ............ 234

146
YARIS SEDAN_OM_OM99S50z_(U)
3-1. Start/Stop Engine
Ignition Switch
The system operates only when the driver is in the vehicle or within
operational range while the key is being carried.
Each time the push button start is
pressed, the ignition switches in
the order of off, ACC, and ON.
Pressing the push button start
again from ON switches the igni-
tion off.
■Off
The power supply to electrical devices turns off and the push b utton
start indicator light (amber) also turns off.
In this position the st eering wheel is locked.
■ACC (Accessory)
Some electrical access ories will operate and the indicator light
(amber) illuminates.
■ON
This is the normal running posit ion after the engine is started. The
indicator light (amber) turns off. (The indicator light (amber) illumi-
nates when the ignition is switched ON and the engine is not ru n-
ning.)
Some indicator lights/warning lights should be inspected before the
engine is started ( P. 1 6 2 ) .
Push Button Start Positions
Push button start Indicator light

YARIS SEDAN_OM_OM99S50z_(U)
1473-1. Start/Stop Engine
3
When Driving
■Push Button Start Positions
●The engine starts by pressing the push button start while depre ssing the
clutch pedal (manual transaxle) or the brake pedal (automatic t ransaxle). To
switch the ignition position, press the push button start without depressing
the pedal.
● Do not leave the ignition switched ON while the engine is not r unning. Doing
so could result in the battery going dead. If the ignition is l eft in ACC (For
automatic transaxle, the selector lever is in the P position, a nd the ignition is
in ACC), the ignition switches off automatically after about 25 minutes.
■ ACC (Accessory)
The keyless entry system does not function while the push butto n start has
been pressed to ACC, and the doors will not lock/unlock even if they have
been locked manually.
■ ON
When the push button start is pressed to ON, the sound of the f uel pump
motor operating near the fuel tank can be heard. This does not indicate an
abnormality.
WARNING
■ Before leaving the driver’s seat, set the parking brake, make s ure the
selector lever is in 1st gear or R (manual transaxle) or in P ( automatic
transaxle), and always switch the ignition off
Leaving the driver’s seat without setting the parking brake, sh ifting the
selector lever to 1st gear or R (manual transaxle) or to P (automatic tran-
saxle), and switching the ignition off is dangerous. Unexpected vehicle
movement could occur which could result in an accident.
In addition, if your intention is to leave the vehicle for even a short period, it
is important to switch the ignition off, as leaving it in anoth er position will dis-
able some of the vehicle’s security systems and run the battery down.

YARIS SEDAN_OM_OM99S50z_(U)
1513-1. Start/Stop Engine
3
When Driving
If the engine cannot be started due to a dead key battery, the engine
can be started using the following procedure:
Continue to depress the brake pedal firmly until the engine has
completely started.
Manual transaxle:
Continue to depress the clutch p edal firmly until the engine has
completely started.
Make sure that the push button start indication light (green) f lashes.
The push button start indicator light (green) will flash even if the push but-
ton start is pressed before depressing the clutch pedal (manual transaxle)
or the brake pedal (automatic transaxle). If the clutch pedal i s depressed
(manual transaxle) or the brake pedal is depressed (automatic transaxle)
under this condition, the engine can be started by resuming the procedure
following this.
Touch the push button start
using the backside of the key
(as shown) while the push but-
ton start indicator light (green)
flashes.
When touching the push button
start using the backside of the key
as shown in the illustration, touch
the push button start with the lock
switch side of the key facing up.
Make sure that the push button start indicator light (green) tu rns on.
Press the push button start to start the engine.
● The engine cannot be started unless the clutch pedal is fully d epressed
(manual transaxle) or the brake pedal is fully depressed (autom atic tran-
saxle).
● If there is a malfunction with the push button start function, the push button
start indicator light (amber) flashes. In this case, the engine may start, how-
ever, have the vehicle checked at your Toyota dealer as soon as possible.
● If the push button start indicator light (green) does not illuminate, perform
the operation from the beginning again. If it does not illumina te, have the
vehicle checked at your Toyota dealer.
● To switch the ignition position without starting the engine, perform the follow-
ing operations after the push button start indicator light (gre en) turns on.
Release the clutch pedal (manual transaxle) or brake pedal (aut omatic
transaxle).
Engine Start Function Wh en Key Battery is Dead
1
2
3
Smart Key
Indicator light
Push button start
Q
R
S
N

170
YARIS SEDAN_OM_OM99S50z_(U)
3-3. Transaxle
Automatic Transaxle Controls
Various Lockouts:
The Sport AT has an option that is not included in the traditional automatic
transaxle that gives the driver the option of selecting each ge ar instead of
leaving it to the transaxle to shift gears. Even if you intend to use the auto-
matic transaxle functions as a traditional automatic, you shoul d also be aware
that you can inadvertently shift into manual shift mode and an inappropriate
gear may be retained as the vehicle speed increases. If you not ice the engine
speed going higher or hear the engine racing, confirm you have not acciden-
tally slipped into manual shift mode ( P. 174).
Lock-release button
Indicates that you must depress the brake pedal and hold in
the lock-release button to shift (The ignition must be
switched ON).
Indicates the selector lever can be shifted freely into any
position.
Indicates that you must hold in the lock-release button to
shift.

YARIS SEDAN_OM_OM99S50z_(U)
1713-3. Transaxle
3
When Driving
The selector position is indicated
when the ignition is switched ON.
■Gear position indication
In manual shift mode, the “M” of the shift position indication illumi-
nates and the numeral for the selected gear is displayed.
The warning light turns on when the system has a malfunction.
Refer to Warning Lights on P. 162.
• The shift position indicator light in the combination meter il lumi-
nates. Refer to Warning/I ndicator Lights on P. 162.
• The selector lever must be in P or N to operate the starter.
■P (Park)
P locks the transaxle and prevent s the front wheels from rotating.
■R (Reverse)
In position R, the vehicle moves only backward. You must be at a
complete stop before shifting to or from R, except under rare c ir-
cumstances as explained i n Rocking the Vehicle (P. 136).
■N (Neutral)
In N, the wheels and transaxle a re not locked. The vehicle will roll
freely even on the slightest inc line unless the parking brake o r
brakes are on.
Apply the parking brake or depress the brake pedal before moving the
selector lever from N to prevent the vehicle from moving unexpe ctedly.
■
D (Drive)
D is the normal driving position. From a stop, the transaxle wi ll
automatically shift through a 6-gearsequence.
Shift Position Indication
Warning Light
Transaxle Ranges

YARIS SEDAN_OM_OM99S50z_(U)
1733-3. Transaxle
3
When Driving
Active Adaptive Shift (AAS) automatically controls the transaxle shift
points to best suit the road conditions and driver input. This improves
driving feel. The transaxle may switch to AAS mode when driving up
and down slopes, cornering, driving at high elevations, or depressing
the accelerator pedal quickly while the selector lever is in th e D posi-
tion. Depending on the road and driving conditions/vehicle oper ations,
gear shifting could be delayed or not occur, however, this does not
indicate a problem because the AAS mode will maintain the optim um
gear position.
The shift-lock system prevents s hifting out of P unless the brake pedal
is depressed.
To shift from P:
Depress and hold the brake pedal.
Start the engine.
Press and hold the lock-release button.
Move the selector lever.
● When the ignition is switched to ACC or the ignition is switche d off, the
selector lever cannot be shifted from P.
● The ignition cannot be switched to OFF if the selector lever is not in P.
Active Adaptive Shift (AAS)
Shift-Lock System
1
2
3
4

174
YARIS SEDAN_OM_OM99S50z_(U)
3-3. Transaxle
If the selector lever will not move from P using the proper shift proce-
dure, continue to hold down the brake pedal.
Remove the shift-lock override
cover using a cloth-wrapped flat
head screwdriver.
Insert a screwdriver and push it
down.
Press and hold the lock-release
button.
Move the selector lever.
Take the vehicle to your Toyota dealer to have the system check ed.
The manual shift mode gives you the feel of driving a manual tran-
saxle vehicle by allowing you to operate the selector lever man ually.
This allows you to control engine rpm and torque to the drive w heels
much like a manual transaxle when more control is desired.
To change to manual shift mode,
shift the lever from D to M.
To return to automatic shift mo de, shift the lever from M to D.
Shift-Lock Override
Cover
1
2
3
Manual Shift Mode
4
5

186
YARIS SEDAN_OM_OM99S50z_(U)
3-4. Switches and Controls
The coming home light turns on the headlights (low beams) when the
lever is operated.
■To turn on the lights
When the lever is pulled with
the ignition switched to ACC or
OFF, the low beam headlights
turn on.
The headlights turn off after a
certain period of time has
elapsed after the doors are
closed.
● The time until the headlights turn off after all of the doors a re closed can be
changed.
Refer to Customizable Features on P. 584.
● If no operations are done for 3 minutes after the lever is pull ed, the head-
lights turn off.
● The headlights turn off if the lever is pulled again while the headlights are
illuminated.
The leaving home light turns on the lights when the smart key u nlock
button is pressed while away from the vehicle.
The following lights turn on wh en the leaving home light is operated.
Low beams, Parking lights, Tailli ghts, License plate lights, Dashboard
illumination
Coming Home Light
Leaving Home Light

YARIS SEDAN_OM_OM99S50z_(U)
1873-4. Switches and Controls
3
When Driving
■To turn on the lights
When the ignition switch and the headlight switch are in the follow-
ing conditions, the headlights will illuminate when the smart k ey
unlock button is pressed and the vehicle receives the smart key sig-
nal. The headlights turn off after a certain period of time has
elapsed (30 seconds). • Ignition switch: off
• Headlight switch: or
Lock button
Unlock button
● Operation of the leaving home light can be turned on or off.
Refer to Customizable Features on P. 584.
● When the smart key lock button is pressed and the vehicle recei ves the
smart key signal, the headlights turn off.
● When the headlight switch is in a position other than or , the head-
lights turn off.
The number of passengers and weight of cargo in the luggage com -
partment change the ang le of the headlights.
The angle of the headlights will be automatically adjusted when turn-
ing on the headlights.
Some countries require moving vehicles to have their lights on (day-
time running lights) during the daytime.
The daytime running lights turn on automatically when the vehic le
starts moving.
They turn off when the parking brake is operated or the shift l ever is
shifted to the P position ( automatic transaxle vehicle).
Except Canada:
The daytime running lights can be deactivated.
Refer to Customizable Features on P. 584.
1
2
Headlight Leveling (if equipped)
Daytime Running Lights