tow VOLKSWAGEN BEETLE 2015 Owner´s Manual
Page 366 of 370
Installing the rear towing eye
Fig. 176 In the right rear bumper: Removing the cover.
Fig. 177 In the right rear bumper: Installing the towing eye.
Page 367 of 370
NOTICE
Always make sure the towing eye is screwed all the way into threaded hole so that it is secure. If not, it could be pulled out while your vehicle is being towed.
Installing the rear towing eye (Beetle R-Line)
Fig. 178 In the right rear bumper: Removing the cover.
Fig. 179 In the right rear bumper: Installing the towing eye.
Page 368 of 370
x Screw the towing eye counterclockwise into the threaded hole as far as it will go (arrow)
⇒ fig. 179 ⇒ . Use the lug wrench to turn and tighten the towing eye completely and securely.
x When towing is complete, unscrew the towing eye clockwise to remove it.
x Position the lower tab of the cover ⇒ fig. 178 into the opening in the bumper and carefully push on the upper area of the cover until it has locked in place.
NOTICE
Always make sure the towing eye is screwed all the way into threaded hole so that it is secure. If not, it could be pulled out while your vehicle is being towed.
Driving tips while towing