phone VOLKSWAGEN BEETLE 2017 User Guide

Removing the portable iPhone® holder
x Remove the iPhone® before removing the portable iPhone® holder.
x Hold the portable iPhone® holder securely with one hand and press the release button ⇒ fig. 148 A (small arrow).
x Pull the portable iPhone® holder up and out of the mount in the instrument panel and store securely.
x Press the cover in the direction of the arrow until it snaps into place ⇒ fig. 148 B, ⇒ .
WARNING
Operating the iPhone® and using the apps while driving can cause driver distraction, accidents, and serious personal injury.
x Always pay attention and be responsible when driving.
x Select a volume level that allows you to hear audible signals (such emergency vehicle sirens) clearly at all times.
x A volume level that is too high can damage hearing. This is true even if you are exposed to loud noises for only short periods of time.
WARNING
An obstructed field of view may limit visibility and cause accidents and serious personal injury.
x While driving, the iPhone® must be swiveled to the horizontal (landscape) position so that the driver’s view through the windshield is not blocked.
WARNING
If either the iPhone® or the portable iPhone® holder is loose or not secured properly, it can be thrown around the vehicle interior during sudden braking or driving maneuvers or in a collision and cause injuries.
x Always insert the portable iPhone® holder and the iPhone® securely in their mounts or store them safely in the vehicle.
WARNING
Never use a mobile telephone, CB radio, or other radio equipment while refueling. The electromagnetic radiation can cause sparks that can ignite fuel vapors and cause a fire.
NOTICE
Swiveling the iPhone® mount incorrectly can damage the portable iPhone® holder.
x Do not use the portable iPhone® holder as a handle or use it to hold anything other than the iPhone®.
x Do not press down on the portable iPhone® holder when swiveling the iPhone®. The portable iPhone® holder and the instrument panel could be damaged.

NOTICE
Extremely high or low temperatures can affect the function of the portable iPhone® holder or damage the iPhone®.
x Only use or store the iPhone® at an acceptable temperature. Read and follow the iPhone® owner's manual.
x Always take the portable iPhone® holder with you when leaving the vehicle to help protect it from extremely high or low temperatures or strong sunlight.
NOTICE
The iPhone® must always be switched off in areas where it is required and where the use of mobile devices is prohibited. When switched on, the radiation emitted by the iPhone® can cause interference with sensitive technical and medical devices, which can result in malfunctions or damage to the devices.
NOTICE
Moisture can damage the electrical contacts for the portable iPhone® holder on the instrument panel.
x Do not use anything damp to clean the portable iPhone® holder. Use only a dry cloth.
NOTICE
Do not install the iPhone® in the portable iPhone® holder when there are protective covers on the front or rear of the iPhone®. If there are any protective covers on the front or rear of the iPhone®, remove them before installing the iPhone®.
x Always insert the iPhone® straight into the portable iPhone® holder ⇒ fig. 149. If the iPhone® is inserted at an angle, the electrical contacts on the iPhone® and the portable iPhone® holder could be damaged.
Volkswagen recommends always taking the portable iPhone® holder with you when leaving the vehicle to help prevent theft.
Please check to be sure your version of the iPhone® is compatible with the iPhone® holder in the vehicle. Different portable iPhone® holders are required for different iPhone® versions or models.

Declaration of Compliance, Telecommunications and
Electronic Systems
Radio Frequency Devices and Radiocommunication Equipment User Manual Notice.
Radio-based equipment
x Mobile Phone Package
x Electronic immobilizer
x Remote control vehicle key
x Keyless Access with push-button start
x Car-Net (US only)
x Blind Spot Monitor with Rear Traffic Alert
These devices comply with:
FCC Part 15.19
These devices comply with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Part 15.21
CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
These devices comply with RSS-210 of Industry Canada.
Operation is subject to the following 2 conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.

WARNING
Improper use of jumper cables when jump-starting a vehicle with a dead battery can cause the battery to explode, leading to serious personal injury. To help reduce the risk of battery explosion:
x All work on the batteries or the electrical system in your vehicle can cause serious acid burns, fires, or electrical shocks. Always read and heed the following WARNINGS and safety
precautions before working on the batteries or the electrical system ⇒  Vehicle battery.
x Always make sure that the battery providing starting assistance (the booster battery) has the same voltage as the dead battery (12 V) and about the same amperage capacity (see battery label).
x Never jump-start a vehicle with a thawed or frozen vehicle battery. The battery can explode. A dead battery can freeze at temperatures around +32 °F (0 °C).
x A battery that is frozen or was frozen, but has since thawed, must be replaced.
x When the vehicle battery is jump-started, it gives off hydrogen gas, which is highly explosive! Always keep fire, sparks, open flame, and smoking materials far away from vehicle batteries. Never use a mobile telephone while connecting or disconnecting jumper cables.
x Jump-start batteries only in well-ventilated areas. Batteries give off highly explosive hydrogen gas during jump-starting.
x Always route the jumper cables so that they cannot get caught in any moving parts in the engine compartment.
x Never short out the battery terminals by connecting the positive (+) and negative (-) terminals with each other.
x Never connect the negative cable from the other vehicle directly to the negative terminal of the dead battery, as this may cause the hydrogen gas given off by the dead battery to explode.
x Never attach the negative cable from the vehicle providing starting assistance to any part of the fuel system or to the brake hoses or brake lines.
x Never allow the non-insulated parts of the battery clamps to touch.
x Never allow the jumper cable attached to the positive battery terminal to contact metal parts of the vehicle.
x Always follow the instructions of the jumper cable manufacturer.
NOTICE
To help prevent extensive damage to the vehicle electrical system, read and heed the following:
x Connecting jumper cables improperly can cause a short circuit and do expensive damage to the vehicle's electrical system.
x Do not let the vehicles touch each other while the jumper cables are connected. If they do, electrical current may flow between the vehicles when the positive (+) terminals are connected, causing electrical system damage.