VOLVO S60T8 2019 Sensus Navigation Manual

Page 21 of 43

NAVIGATION
}}
* Option/accessory.19
Show traffic disruptions along theroute A list of traffic disruptions along the route can be shown when a destination has been entered in the navigation system *.
1. When the map appears, expand the left-side
toolbar using the down arrow and then the three dots.
2.
Tap Ahead.
3. Tap
Traffic. If there are no traffic problems
along your route, the traffic button will be grayed out.
> Any traffic problems along the route will be displayed according to their distance from the vehicle.
4. For additional information about a traffic dis- ruption, tap the row to open an informationcard. Select one of the information card'soptions and follow the instructions. 5.
Tap
Avoid to avoid the traffic disruption.
> The route will be recalculated and guid- ance will begin for the new route.
Related information
 Traffic disruptions on map (p. 18)
 Traffic information settings (p. 23)
 Information cards in the navigation system
*
(p. 6)
 Real Time Traffic Information (RTTI) (p. 20)
Selecting a detour in the navigation
system
*
Select a detour to avoid the next section of the route, e.g. if the road is closed.
1. Expand the left-side toolbar using the down arrow and then the three dots.
2.
Tap the Detour symbol to display an alter-
nate route with information on the new dis- tance and estimated travel time. Normally,only short detours are suggested to take youquickly back to your original itinerary.
3. To accept the suggested detour: Tap the
sign with the detour information. The route isalso accepted if you begin driving the sug-gested route. Once the suggestion has beenaccepted, guidance will resume using the detour as the new route. If you do not
accept the suggestion, continue driving the
original route.
Instead of choosing
Detour, you can instead
select another route and leave your itinerary's current route. The system will update the route
10 Only available in certain markets.11
Only available in certain markets.12 Real Time Traffic Information

Page 22 of 43

||
NAVIGATION
* Option/accessory.
20 automatically and continue guidance to your des- tination along the most suitable route. It is also possible to display an alternative route while driving.
Related information

Viewing alternative routes (p. 17)
Real Time Traffic Information
(RTTI)13
When the vehicle is connected to the Internet, the driver can access enhanced traffic informa- tion (RTTI 14
).
Information on traffic events and traffic flow is continuously retrieved from an Internet service.When a vehicle requests traffic flow information,anonymous data about traffic flow in the vehicle'slocation is also provided, which helps enable theservice to function. Anonymous data is only sentwhen RTTI is activated. Current traffic information is shown in the naviga- tion system * for highways/freeways, major roads,
secondary roads and in some cases urban routes. The amount of traffic information shown on the map depends on the distance to the vehicle andis only shown within approximately 120 km(75 miles) from the vehicle's location. Text and symbols on the map are displayed in the usual way and the traffic flow shows how fast thetraffic is moving on a road in comparison with theroad's speed limit. The traffic flow is shown onthe map on each side of the road with a coloredline in each direction.
 Green - no disturbances.
 Orange - slow-moving traffic. 
Red - congestion/traffic jam/accident.
 Black - road closed.
NOTE
Traffic information is not available in all areas/countries. Coverage areas for traffic information is con- tinuously extended.
Related information
 Activating and deactivating enhanced traffic information (p. 21)
13
Certain markets only.
14 Real Time Traffic Information

Page 23 of 43

NAVIGATION
}}
* Option/accessory.21
Activating and deactivating
enhanced traffic information15
When the vehicle is connected to the Internet, the driver can access enhanced traffic informa- tion (RTTI 16
) in the navigation system *.
To activate or deactivate RTTI: 1.
Tap
Settings in the center display's Top
view.
2. Tap
NavigationTraffic.
3. Select
Real Time Traffic Information to
activate (replace regular traffic information with RTTI) or deactivate RTTI.
4. One pop-up window with the heading
Terms
and conditions and one with the headingData sharing will appear if RTTI is being
used for the first time.
If the vehicle's Internet connection is lost when RTTI is activated, regular traffic information willbe automatically activated. RTTI will be reactiva-ted when the vehicle is once again connected tothe Internet.
Related information
 Real Time Traffic Information (RTTI) (p. 20)
 Traffic information settings (p. 23)
Navigation system
* settings
Select settings for how the route and other infor- mation should be presented in the navigationsystem.
SettingsNavigation
Settings can be personalized in the following areas:

Map - manages the content and appearance
of the map.

Route and Guidance - handles guidance
and how routes are calculated and displayed.

Traffic - manages traffic information.
Related information
 Map settings (p. 21)
 Route settings and guidance (p. 22)
 Traffic information settings (p. 23)
Map settings
The following settings determine how the map is displayed in the navigation system *.
SettingsNavigationMap
Settings can be personalized in the following areas:

Position Format
Map Display Format
Show Speed Cameras
Show Favorites
Point of Interest (POI)
Position FormatSelect Position Format to designate/display
the current location on the map using its address or its coordinates: 
Address
Coordinates and Altitude
15 Certain markets only.
16 Real Time Traffic Information

Page 24 of 43

||
NAVIGATION
* Option/accessory.
22
Map Display FormatSelect Map Display Format to choose back-
ground lighting for the map:

Day - bright colors.

Night - dark colors for better night vision.

Auto - the system will switch between Dayand Night depending on the ambient light in
the passenger compartment.
Speed cameras 17Select Show Speed Cameras to display speed
cameras on the map.
FavoritesTo display Favorites on the map, select.
Point of Interest (POI 18
)Select POIs to be displayed on the map underPoint of Interest (POI). Tap on the desired cat-
egory, e.g. "Transportation", and then select show all or specific sub categories. Tap
Back or Closeto exit the menu.
Related information
 Navigation system
* settings (p. 21)
 Route settings and guidance (p. 22)
 Traffic information settings (p. 23)
 Viewing points of interest along the route (p. 17) 
Entering a POI as a destination (p. 12)
 Entering a destination using Recent/Favor-ites/Library (p. 13)
Route settings and guidance Settings for how the route is calculated and how guidance is presented in the navigation system
*
are selected here.
SettingsNavigationRoute and
Guidance
Settings can be personalized in the following areas:

Arrival Time Format
Voice Guidance Level
Choose Default Route Type
Route Learning
Avoidance Settings
Propose Gas Station
17 This function is not available on all markets.
18 Point of Interest

Page 25 of 43

NAVIGATION
}}
* Option/accessory.23
Arrival Time FormatChoose how arrival time will be displayed:

ETA19 (estimated time of arrival at the desti-
nation)

RTA20 (remaining time to arrival at destina-
tion)
Times are displayed according to the time zone of the destination.
Voice Guidance Level1. Tap Voice Guidance Level.
2. Tap desired voice guidance:

None (no automatic voice guidance, but
guidance can be manually requested once)

Low (only one message per guidance
point)

Medium (up to 3 messages per guidance
point, with limited information provided)

Full (up to 4 messages per guidance
point and all available information provi- ded)
Choose Default Route TypeSelect the default type of route to be used:

Fast
Eco
Scenic (highways/freeways are avoided
whenever possible; note that this could lead to longer travel times)
It is also possible to display an alternative routewhile driving.
Route LearningSelect Route Learning to allow data to be col-
lected to optimize route calculations.
AvoidTap Avoidance Settings to open a menu of
options to automatically avoid (if possible) when calculating a route. Possible selections includetunnels, ferries, congestion charge zones, etc.
Suggest service stationTap Propose Gas Station to activate or deacti-
vate the display of suggestions for nearby service stations in the instrument panel when fuel level islow.
Related information
 Navigation system
* settings (p. 21)
 Map settings (p. 21)
 Traffic information settings (p. 23)
 Viewing alternative routes (p. 17)
Traffic information settings The following settings determine how traffic information 21
is presented in the navigation sys-
tem *.
SettingsNavigationTraffic
Settings can be personalized in the following areas:

Show and Handle Traffic Events
Avoid Traffic Events
Show Free Flowing Traffic
Real Time Traffic Information
Show & Handle Traffic EventsSelect to display traffic events on the map and use this information to calculate routes: 
None
Major
All types
19 Estimated Time of Arrival
20 Remaining Time to Arrival

Page 26 of 43

||
NAVIGATION
* Option/accessory.
24
Avoid Traffic EventsSelect to avoid traffic problems when calculating routes.

Never
Ask - (suggestions for alternate routes will
be provided when available during the trip)

Always
Show Free Flowing TrafficSelect Show Free Flowing Traffic to show this
on the map.
Using RTTI 22Select Real Time Traffic Information to use
enhanced traffic information when the vehicle is connected to the Internet (RTTI).
Related information
 Navigation system
* settings (p. 21)
 Map settings (p. 21)
 Route settings and guidance (p. 22)
 Real Time Traffic Information (RTTI) (p. 20)
Map updating
MapCare is a map update service for Volvo vehi- cles equipped with Sensus Navigation *.
General update informationThere are two ways to update maps. Either via a computer and USB flash drive or directly from the vehicle 23
(if the vehicle has an Internet connec-
tion). The vehicle's map is divided into a number of fixed regions. When updating map data, the driverdoes not need to update all of these regions, butcan instead choose to update only one or morespecific regions. One or more regions can be updated when the vehicle has an Internet connection. However,updating a large number of regions or the entiremap requires a significant amount of data, and itmay be advisable to use a computer and USBflash drive instead.
NOTE
If an itinerary includes more than one region, all regions should have the same versionnumber to enable the system to calculate thebest route to the destination.
Updating the map structureChanging the map structure may sometimes be necessary, e.g., if a region is added or if a largeregion is divided into smaller ones. If this is thecase, normal updates of individual regions maynot be possible and a message will be displayedexplaining what has happened. In this situation, the entire map must be reinstal- led from a USB flash drive. For additional infor-mation, see the Volvo Cars support site(support.volvocars.com) or contact a Volvoretailer.
Updating navigation system softwareIn addition to maps, the navigation system's ownsoftware is under constant development andneeds to be updated occasionally. This couldmean that a recently downloaded map is not sup-ported by the current navigation system software.In such cases, a message will be displayed indi-cating that the navigation system software mustbe updated. Consult a Volvo retailer for assis-tance with the update.
21 Certain markets only.22
Certain markets only.23 Only available in certain countries.

Page 27 of 43

NAVIGATION
}}
* Option/accessory.25
FAQs
AskAnswer
Can the map dataplatform bechangedfrom e.g.Europe toNorthAmerica? Yes, with some exceptions.Contact a Volvo retailer for up-to-date information.
How longdo mapupdatestake? This depends on the size of thefile(s) and the speed of theInternet connection. Informationabout the size of the update (inMB) will be displayed on thescreen.
How big isan update? This varies from market to mar-ket. For detailed information onyour market's map, see theVolvo Cars support site,support.volvocars.com.
The updateis not work-ing. Whatshould I do? Try the Volvo Cars support site(support.volvocars.com) or con-tact a Volvo retailer.
Related information

Updating maps with a computer and USB flash drive (p. 25)
 Updating maps from a vehicle with Internetconnection (p. 27)
 Frequently Asked Questions regarding the navigation system
* (p. 28)
 Navigation license agreements
* (p. 29)
 Navigation system
* copyright (p. 35)
Updating maps with a computer andUSB flash drive
New maps can be downloaded from the Internet to a USB flash drive and then transferred fromthe flash drive to the vehicle's navigation sys- tem *.
Preparations
Computer/USB flash drive update

Page 28 of 43

||
NAVIGATION
26
USB flash drive
For use in updates, the USB flash drive must meet the following requirements:
ParameterRequirement
USB standard (1.0/2.0/3.0): At least 2.0
File system(Ext2/NTFS/FAT32): FAT32
Capacity(8/16/32/64GB): Map file size varies frommarket to market. See filesize descriptions under"Detailed information" foryour market on the VolvoCars support site(support.volvocars.com).
Determining the current map version
1.
Tap Download Center in App view.
2. Tap the arrow to expand the region.
> Detailed map information will be dis-played.
3. Make a note of the map information shown under the map image.
Downloading map data from the Internet to a USB flash drive
Make sure you have a USB flash drive and the map information you noted down.
1. Go to the Volvo Cars support site(support.volvocars.com) on a computer con- nected to the Internet.
2. Select the maps, vehicle model and model year.
3. Tap the region to be updated. > A map containing information about thelatest map data for the region will appear.
4. Verify that the map version is newer than the version in the vehicle.
5. Connect a USB flash drive to the computer and download the update to the USB flashdrive.
The time required for the download variesdepending on the size of the map and the speedof the Internet connection.
Transferring map data from the USB flash drive to the vehicle
The time required to transfer data from the USB flash drive to the vehicle varies depending on thesize of the map data file. The update can be donewhile driving. The navigation system can be usedwhile updating a map region, but it cannot beused during the update of an entire map market,e.g. the EU. If the transfer has not been comple-ted when the ignition is switched off, the updatewill continue the next time the vehicle is driven.

Page 29 of 43

NAVIGATION
}}
* Option/accessory.27
Updating
1. Activate the navigation system.
2. Connect the USB flash drive to the vehicle's
USB port. If there are two USB ports, the other port cannot be used at the same time.
3. The navigation system automatically detects that an update is available and, during theupdate of the whole map database, shows onthe screen what percentage of the process iscomplete.
> When individual regions are updated, theupdate will start immediately. To start an update of the entire map data- base, tap
Confirm. Tap Cancel to stop
the installation.
4. Tap
Confirm. The update of the entire map
database will begin and progress information will be shown on the center display.
5. The center display will indicate when the update is finished. Remove the USB flashdrive from the port.
6. Restart the infotainment system.
7. Verify that the correct map data has been transferred to the vehicle by repeating the steps described above under "Determiningthe current map version".
Interruptions
If an update is interrupted, an explanatory text will always appear in the center display.
What happens if...Answer
the infotainment system is turned offwhile an update isin progress? The process will pauseand will continue auto-matically when the sys-tem is reactivated, e.g.when the engine isstarted.
The USB flash driveis removed from theUSB port beforethe update is fin-ished? The process will pauseand will continue auto-matically when the USBflash drive is reconnec-ted to the USB port.
For additional information, see the Volvo Cars support site (support.volvocars.com) or contact aVolvo retailer.
Related information

Updating maps from a vehicle with Internetconnection (p. 27)
 Map updating (p. 24)
Updating maps from a vehicle withInternet connection The navigation system's
* maps can be upda-
ted 24
when the vehicle is connected to the Inter-
net.
Remote update procedure.
24 Only available in certain countries.

Page 30 of 43

||
NAVIGATION
* Option/accessory.
28 The vehicle must be connected to the Internet.
1.
Tap Download Center in App view.
> The app will start and a number shown near
Maps indicates the number of avail-
able map updates for the specified home region. This number will be displayed untila new search for updates has been per-formed or until updates have been instal-led.
2. Tap
Maps.
3. Tap
Install and then Confirm.
> The installation/update of the selected map will begin.
For additional information, see the Volvo Cars support site (support.volvocars.com) or contact aVolvo retailer.
Automatic map updates
Automatic updates can only be selected if theAuto Software Update function is activated under
SettingsSystemDownload
Center.
1. Automatic map updates can only be selected for your home region. If the home region is not already selected, tap the down-arrow toexpand the region.
> Detailed map information will be dis-played.
2. Tap
Set as home region.
3. Check the
Auto update: box.
> When the vehicle is connected to the Internet and map updates are available, they will be automatically downloaded tothe vehicle.
Related information
 Updating maps with a computer and USBflash drive (p. 25)
 Map updating (p. 24)
Frequently Asked Questions
regarding the navigation system
*
Here are answers to some frequently asked questions about the navigation system SensusNavigation.
The vehicle's location on the map is not correct
The navigation system displays the vehicle's loca- tion with an accuracy of approximately 20 meters(65 ft). Accuracy may be reduced slightly when driving on a road that is parallel with another road, wind-ing roads, multi-level roads and long stretches ofroad with no distinct curves. High mountains, buildings, tunnels, viaducts, interchanges, multi-level roads, etc. may alsoaffect the satellite signal reception, which mayalso reduce the system's ability to accurately cal-culate the vehicle's location.
The system does not always calculate
the fastest/shortest route
Route calculation takes into account factors suchas distance, road width, type of road, traffic inten-sity and speed limits to find the theoretically bestpossible route. Familiarity with an area and expe-rience may enable the driver to find a more effi-cient route.

Page:   < prev 1-10 11-20 21-30 31-40 41-50 next >