carburetor YAMAHA BLASTER 200 2002 User Guide
Page 291 of 368
8-43
4. Install the carburetor and tighten the joint
screws.
5. Install the securing plate. Match one of the
projections on the carburetor cap with one
of the indents on the securing plate.
cC
If the securing plate does not match a pro-
jection, tighten the carburetor cap until they
align. Do not loosen.
6. Tighten the securing plate screw to the
specified torque.
7. Connect the fuel hose and oil delivery hose.
Tightening torque:
3.5 Nm (0.35 m0kg)
5KJ-62 (8 shou) 4/23/01 3:08 PM Page 44
Page 351 of 368
10-3
Model YFS200
Fuel:
Type Premium unleaded gasoline
Tank capacity 9 L
Reserve amount 2 L
Carburetor:
Type/quantity VM26SS/1
Manufacturer MIKUNI
Spark plug:
Type/Manufacturer BR8ES/NGK
Spark plug gap 0.7~0.8 mm
Clutch:
Type Wet, multiple-disc
Operation Left hand operation
Transmission:
Primary reduction system Helical gear
Primary reduction ratio 71/22 (3.227)
Secondary reduction system Chain drive
Secondary reduction ratio 40/13 (3.077)
Transmission type Constant mesh 6-speed
Operation Left foot operation
5KJ-62 (9 shou ~) 4/23/01 3:09 PM Page 14