Carburetor YAMAHA BLASTER 200 2004 User Guide
Page 297 of 386
8-49
5. Install the mixing chamber cap and tighten it.
6. Install the securing plate by installing the
screw.
NOTE:
When installing the securing plate, align the slot
in the securing plate with a projection on the car-
buretor mixing chamber cap.
7. Install the carburetor and tighten the clamp
screws.
8. Connect the fuel hose and the oil hose.
9. Tighten the carburetor float bowl drain
screw.
1. Screw 2. Projection 3. Slot1. Vis 2. Saillie 3. Fente1. Tornillo 2. Protuberancia 3. Ranura
5VM-9-61-05 3/14/03 10:48 PM Page 50
Page 369 of 386
10-3
Model YFS200
Fuel:
Type Premium unleaded gasoline only
Tank capacity 9 L
Reserve amount 2 L
Carburetor:
Type/quantity VM26SS/1
Manufacturer MIKUNI
Spark plug:
Type/Manufacturer BR8ES/NGK
Spark plug gap 0.7–0.8 mm
Clutch:
Type Wet, multiple-disc
Operation Left hand operation
Transmission:
Primary reduction system Helical gear
Primary reduction ratio 71/22 (3.227)
Secondary reduction system Chain drive
Secondary reduction ratio 40/13 (3.077)
Transmission type Constant mesh 6-speed
Operation Left foot operation
5VM-9-61-06 3/14/03 9:40 PM Page 14