navigation YAMAHA FX HO CRUISER 2022 Owners Manual

Page 20 of 136

Safety information
11
tercraft, otherwise you increase your
chance of hitting a submerged object,
which could result in injury.
This watercraft is not equipped with light-
ing required for night operation. Do not op-
erate the watercraft after sunset or before
dawn, otherwise you increase the risk of
colliding with another boat, which could re-
sult in severe injury or death.
Follow navigation rules, and state/provin-
cial and local laws that apply to watercraft.
EJU43131
Operation requirements
All riders must wear a personal flotation de-
vice (PFD) that is approved by the appro-
priate authorities and is suitable for
personal watercraft use.
Wear protective clothing. Severe internal
injuries can occur if water is forced into
body cavities as a result of falling into the
water or being near the jet thrust nozzle.
You must wear shorts with neoprene (wet-
suit material) to keep water from being
forcefully injected into the rectum or vagina
during a fall backward. Riders not wearing
neoprene shorts have received severe rec-
tal, vaginal, and internal injuries resulting in
permanent damage. Normal swimwear
does not offer adequate protection.
Eye protection is recommended to keep
wind, water, and glare from the sun out of
your eyes while you operate your water-
craft. Restraining straps for eyewear are
made which are designed to float should
your eyewear fall in the water.
Footwear and gloves are recommended.
You must decide whether to wear a helmet
while you ride for recreation. You should
know that a helmet could help protect you
60 cm (2 ft)
1Authority-approved PFD
2 Wetsuit bottom
1
2
UF3V73E0.book Page 11 Friday, October 8, 2021 1:30 PM

Page 57 of 136

Instrument operation
48
(3) Select the target waypoint to display thewaypoint details.
(4) Select “Go-To” displayed in the way- point details pop-up.
TIP
When the “Go-To” function is activated,
the “Go-To” button changes color to red.
The “Go-To” function can also be activated
from the waypoint manager on the settings
screen.
The “Go-To” function can also be activated
by selecting a waypoint “ ” displayed on
the map screen.
Activating the “Go-To” function displays
directional assistance to the waypoint on
the map screen.
When you arrive at the target waypoint using
the “Go-To” function, a pop-up window ap-
pears. After arriving at the waypoint, select
“Yes” to stop the “Go-To” function. To stop the “Go-To” function before arriving
at the target waypoint, select “ ” for direc-
tional assistance.
EJU46691Track
Set a track to display a course on the multi-
function information center.
You can create a track using the “Create
Track” function. You can follow a created
track using the “Follow” function. You can re-
cord the course you ran as track information
using the “Record” function.
To add a track using the “Create Track”
function:
(1) Select “ ” on the “overflow menu”.
(2) Select “Create Track”.
TIP
The maximum number of Tracks that can be
set is 5. Once the limit is reached, it is not
1
“Go-To”
1 Directional assistance
Go-ToAdd Waypoint
Waypoints
1
AKADistance: 498.50 Lat: 34.69164 Lon: 137.58110
1
1
“Yes”
1 “Create Track”
NoYe s
You have reached your destination! Would you like to
stop navigation?
1
FollowCreate TrackRecord
Tracks
REC
1
UF3V73E0.book Page 48 Friday, October 8, 2021 1:30 PM

Page 59 of 136

Instrument operation
50
TIP
The “Follow” function can be activated
from the track manager on the settings
screen.
When the “Follow” function is activated, di-
rectional assistance to the waypoint is dis-
played on the map screen.
When you arrive at the end point using the
“Follow” function, a pop-up window appears.
After arriving at the end point, select “Yes” to
stop the “Follow” function.
TIP
You can also stop the “Follow” function by
opening the track manager from the setting
menu screen.
Select “ ” on directional assistance to
stop the “Follow” function before arriving at
the end point.
To add a track using the “Record” func-
tion:
(1) Select “ ” on the “overflow menu”.
(2) Select “Record”.
(3) After arriving at the end point, select “ ” on the “overflow menu”.
(4) Select “Stop” on the pop-up window.
(5) Select “Save”.
1 Directional assistance
1 “Yes”
Following: ABA
Next Point: 3355 m
1
NoYe s
You have reached your destination! Would you like to
stop navigation?
1
1“Record”
1 “Stop”
1 “Save”
FollowCreate TrackRecord
Tracks
REC
1
NoStop
Tracks
Stop Recording Track?
1
SaveTrack Manager
Save Track?
1
UF3V73E0.book Page 50 Friday, October 8, 2021 1:30 PM