lock YAMAHA TW125 2000 User Guide

6-34
PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
3
4
5
6
7
8
92. Push the bulb inward and turn
it counterclockwise.
1. Screw (´2)
3. Place a new bulb in the socket.
Push the bulb inward and turn
it clockwise until it engages
into the socket.
4. Install the lens and the screws.
EC000108
cC
Do not over-tighten the screws as
the lens may break.
1. Bulb
EAU01579Supporting the motorcycle
Since the Yamaha TW125 has no
centerstand, follow these precau-
tions when removing the front and
rear wheel or performing other
maintenance requiring the motor-
cycle to stand upright. Check that
the motorcycle is in a stable and
level position before starting any
maintenance. A strong wooden
box can be placed under the
engine for added stability.
Front wheel service
To stabilize the rear of the motor-
cycle, either use a motorcycle
stand or place a motorcycle jack
under the frame in front of the rear
wheel to prevent it from moving
from side to side. Then use a
motorcycle stand to elevate the
front wheel off of the ground.11
5EK-9-E1 (TW125)<3.1> 4/6/0 11:50 PM Page 64