wheel bolts YAMAHA TW200 2006 Owners Manual

Page 28 of 80


PRE-OPERATION CHECKS
4-3
2
3
45
6
7
8
9

Drive chain

Check chain slack.

Adjust if necessary.

Check chain condition.

Lubricate if necessary.6-21, 6-23
Wheels and tires

Check for damage.

Check tire condition and tread depth.

Check air pressure.

Correct if necessary.6-13, 6-16
Brake and shift pedals

Make sure that operation is smooth.

Lubricate pedal pivoting points if necessary.6-24
Brake and clutch levers

Make sure that operation is smooth.

Lubricate lever pivoting points if necessary.6-24
Sidestand

Make sure that operation is smooth.

Lubricate pivot if necessary.6-25
Chassis fasteners

Make sure that all nuts, bolts and screws are properly tightened.

Tighten if necessary.—
Instruments, lights, signals
and switches

Check operation.

Correct if necessary.—
Sidestand switch

Check operation of ignition circuit cut-off system.

If system is defective, have Yamaha dealer check vehicle.3-11
Battery

Check fluid level.

Fill with distilled water if necessary.6-27
ITEM CHECKS PAGE

Page 35 of 80


PERIODIC MAINTENANCE AND MINOR REPAIR
6-3
1
2
3
4
5
6
7
8
9

10

*
Wheels

Check runout, spoke tightness and for damage.

Tighten spokes if necessary.









11

*
Tires

Check tread depth and for damage.

Replace if necessary.

Check air pressure.

Correct if necessary.











12

*
Wheel bearings

Check bearing for looseness or damage.









13

*
Swingarm

Check operation and for excessive play.










Lubricate with lithium-soap-based grease. Every 24,000 km
14

Drive chain

Check chain slack.

Make sure that the rear wheel is properly aligned.

Clean and lubricate.Every 500 km and after washing the motorcycle or
riding in the rain
15

*
Steering bearings

Check bearing play and steering for roughness.












Lubricate with lithium-soap-based grease. Every 24,000 km
16

*
Chassis fasteners

Make sure that all nuts, bolts and screws are properly
tightened.











17

Sidestand

Check operation.

Lubricate.











18

*
Sidestand switch

Check operation.













19

*
Front fork

Check operation and for oil leakage.









20

*
Shock absorber assem-
bly

Check operation and shock absorber for oil leakage.









21

*
Carburetor

Check starter (choke) operation.

Adjust engine idling speed.













22

Engine oil

Change.

Check oil level and vehicle for oil leakage.













23

Engine oil filter element

Clean.







24

*
Engine oil strainer

Clean.


NO. ITEM CHECK OR MAINTENANCE JOBODOMETER READING (
×
1,000 km)
ANNUAL
CHECK
1 6 12 18 24