washer fluid YAMAHA YZF-R1SC 2004 User Guide

4-42
FRONT AND REAR BRAKESCHAS
WARNING
27 Nm (2.7 m
kg, 20 ft
lb)
22 Nm (2.2 m
kg, 16 ft
lb)
30 Nm (3.0 m
kg, 22 ft
lb)
WARNING
CAUTION:
EAS00642
ASSEMBLING AND INSTALLING THE REAR
BRAKE CALIPER

Before installation, all internal brake com-
ponents should be cleaned and lubricated
with clean or new brake fluid.

Never use solvents on internal brake com-
ponents as they will cause the piston seals
to swell and distort.

Whenever a brake caliper is disassembled,
replace the brake caliper piston seals.
Recommended brake fluid
DOT 4
1. Install:

brake caliper
1
(front)
(rear)

brake pad pin

screw plug

copper washers
New

brake hose
2

union bolt 3
Proper brake hose routing is essential to in-
sure safe motorcycle operation. Refer to
“CABLE ROUTING”.
When installing the brake hose onto the
brake caliper
1, make sure the brake pipe a
touches the projection b on the brake cali-
per.
ProCarManuals.com