check engine YAMAHA YZF-R7 1999 Workshop Manual
Page 365 of 381
8 - 29
–+ELECELECTRONIC FUEL INJECTION SYSTEM
1Main switch
5Battery
6Main fuse
CCamshaft sensor
DThrottle position sensor
EIntake air pressure sensor
FAtmospheric pressure sensor
GIntake air temperature sensor
HCoolant temperature sensor
IPickup coil
JECU
KCylinder #1-injector 1
LCylinder #2-injector 1
MCylinder #3-injector 1
NCylinder #4-injector 1
OCylinder #1-injector 2
PCylinder #2-injector 2
QCylinder #3-injector 2
RCylinder #4-injector 2
XFall detection switch
YSpeed sensor
yFuel pump
zMain relay
}Engine stop switch
ŒElectronic fuel injection system fuse
£ECU fuse
TROUBLESHOOTING
NOTE:
• Before troubleshooting, remove the following part(-s):
1) bottom cowling
2) front cowling
• Troubleshoot with the following special tool(-s).
The condition code is displayed by the tachometer.
Check the condition code list to
identify the faulty part. Refer to
“ELECTRICAL CONTROL SYS-
TEM”.
In diagnosis mode, select the
appropriate diagnosis code to
check the operation of the faulty
part.Check the
wiring.Replace.
Co, diagnosis switch box
90890-03171
Test coupler adapter
90890-03149
Out of specifi-
cationNo good
Page 375 of 381
8 - 39
–+ELECELECTRICAL CONTROL SYSTEM
CO EMISSION ADJUSTMENT MODE
With the CO emission adjustment mode,
the amount of fuel injected by the injector
can be adjusted.
NOTE:
Prior to adjusting the CO emission, the
throttle bodies must be properly synchro-
nized.
• Remove the bottom cowling and front
cowling.
Refer to “COWLINGS” in chapter 3.
• Remove the CO check bolts from the
exhaust pipe assembly.
• Install the exhaust attachment 1 and CO
tester 2 to the exhaust pipe assembly.
• Attach the engine tachometer to the igni-
tion coil for cylinder #1.
Refer to “SYNCHRONIZING THE THROT-
TLE BODIES” in chapter 3.
• Remove the protection cap 3 from the EFI
test coupler 4.
• Connect the CO, diagnosis switch box 5
to the EFI test coupler 4.
• Start the engine and let it warm up for
several minutes.
Exhaust attachment
90890-03134
Engine tachometer
90890-06760
CO, diagnosis switch box
90890-03171
Engine idling speed
1,000 ~ 1,200 r/min
2