Convertible ASTON MARTIN V8 VANTAGE 2010 Manual PDF

Convertible Roof (01.17)
Body System (01.00)
May 2007 Workshop Manual 1-12-69
7. Open luggage compartment. secure velcro straps x2 and drain tubes x3.
8. Install front liner.
9. Close luggage compartment.
RH/LH Flex Shaft - Renew
Removal
10. Remove header panel assembly (see Workshop Manual procedure 01.05.BB Panel Assembly - Header - Renew).
11. Release insulation from header latch motor (see Figure 1).
12. Release flex shaft from centre securing clip (see Figure 2).
13. Release flex shaft from motor splines.
14. Release flex shaft from latch splines and remove.
Installation
1. Ensure header motor and latch are in fully open position prior to installation.
2. Align flex shaft on latch splines and install.
3. Align flex shaft to motor splines and install.
4. Secure flex shaft to centre securing clip.
5. Secure insulation to header latch motor.
6. Install header panel assemb ly (see Workshop Manual
procedure 01.05.BB Panel Assembly - Header - Renew).
Repair Operation Time (ROT)

Convertible Roof (01.17)
Body System (01.00)1-12-70 Workshop Manual May 2007