automatic transmission AUDI A3 1996 8L / 1.G ATW Engine Basic Setting Workshop Manual

01-58


Basic Setting (function 04)

With ignition on and engine at standstill, the
following operations can be performed using
"function 04", basic setting:

Adapt throttle valve control module to Engine
Control Module (ECM) Display group 060(
Page 24
-121
)

Vehicles with automatic transmission:
Adaptation of kick down function of accelerator
pedal position sensor to ECM Display group
063 ( Page 24
-139
)

With engine running, the following operations
can be performed using basic setting:

Adaptation of oxygen sensor control Page 24
-74

Pa
ge 1 of 5 Basic Settin
g (function 04
)
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.01.5

01-59

Test requirements for operations with engine
running:

No DTCs in DTC memory.
Coolant Temperature at least 80 C.

Electrical consumers switched off (radiator
fan must NOT run during test).
A/C switched off.
Vehicles with automatic transmission
Selector lever in P or N.

Test sequence

- Connect VAS5051 tester or VAG1551 scan tool
and select control module for engine electronics
using "address word" 01 Page 01
-10
. Ignition
must remain switched on.
or, depending on desired operation:

- Start engine.Rapid data transfer
HELP
Select function XX

When indicated on display
Pa
ge 2 of 5 Basic Settin
g (function 04
)
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.01.5