sensor AUDI A3 1997 8L / 1.G AEB ATW Engines Exhaust System Components Workshop Manual

[x] Cancel search | Manufacturer: AUDI, Model Year: 1997, Model line: A3, Model: AUDI A3 1997 8L / 1.G
Pages: 35, PDF Size: 0.46 MB
AUDI A3 1997 8L / 1.G AEB ATW Engines Exhaust System Components Workshop Manual A3 1997 8L / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/951/w960_951-0.png AUDI A3 1997 8L / 1.G AEB ATW Engines Exhaust System Components Workshop Manual
Search: (trunk, fuel pressure, ESP inoperative, remote start, refuelling, towing capacity)

Page 4 of 35

AUDI A3 1997 8L / 1.G AEB ATW Engines Exhaust System Components Workshop Manual 26-3 5 - Bolt 25 Nm (18 ft lb) 6 - Mount 7 - Gasket Always replace 8 - Nut Always replace30 Nm (22 ft lb) 9 - Gasket Always replace 10 - Turbocharger Removing and installing Page 21 -30

Page 5 of 35

AUDI A3 1997 8L / 1.G AEB ATW Engines Exhaust System Components Workshop Manual 26-4 CAUTION! Part numbers are listed here for reference only. Always check with your Parts department for the latest information. 12 - Heated Oxygen Sensor (HO2S) 50 Nm (37 ft lb)Only grea

Page 11 of 35

AUDI A3 1997 8L / 1.G AEB ATW Engines Exhaust System Components Workshop Manual 26-8 7 - Heated Oxygen Sensor (HO2S) 50 Nm (37 ft lb)Only grease threads with "G 052 112 A3." Do NOT allow grease to get into slots on sensor body Checking Repair Manual, 1.8 Liter 4-Cyl. 5V

Page 22 of 35

AUDI A3 1997 8L / 1.G AEB ATW Engines Exhaust System Components Workshop Manual 26-17 Exhaust manifold, removing and installing Removing Note: Replace gaskets and self-locking nuts. Flexpipe in front exhaust pipe must not be bent more than 10

Page 27 of 35

AUDI A3 1997 8L / 1.G AEB ATW Engines Exhaust System Components Workshop Manual 26-21 Three Way Catalytic Converter (TWC), removing and installing Removing Note: Replace gaskets and self-locking nuts. Flexpipe in front exhaust pipe must not be

Page 29 of 35

AUDI A3 1997 8L / 1.G AEB ATW Engines Exhaust System Components Workshop Manual 26-22 - Remove air guide duct between cowl and air cleaner housing. - Remove air cleaner housing cover. - Remove the following lines/harness connectors: 1 - At wastegate bypass

Page 30 of 35

AUDI A3 1997 8L / 1.G AEB ATW Engines Exhaust System Components Workshop Manual 26-23 Installing Installation is the reverse of removal, noting the following: Only grease threads of oxygen sensor with "G 052 112 A3." Do NOT allow grease to get into slo
Search: (fuse, oil level, auxiliary battery, remove seats, change time, oil viscosity)