lug AUDI A3 1998 8L / 1.G ATW Engine Diagnostic Trouble Code Table Workshop Manual

01-23

DTC
DTC text
Corrective action
SAE
VAG


P0300 16684 Combustion misfire detected
- Check fuel pressure Page 24
-33
- Check fuel injectors Page 24
-38
P0301 16685 Cyl. 1 combustion misfire detected
- Check spark plugs and ignition wires with connector
P0302 16686 Cyl. 2 combustion misfire detected
- Ignition coils with power output stages Checking Page 28
-4
P0303 16687 Cyl. 3 combustion misfire detected
- Check misfire recognition Page 28
-51
P0304 16688 Cyl. 4 combustion misfire detected
- Fill fuel tank with fuel
P0321 16705 Engine Speed (RPM) sensor -G28-
Implausible signal - Check sender for fuel gauge Page 28
-26
P0322 16706 Engine Speed (RPM) sensor -G28-
No signal
Pa
ge 9 of 40 Dia
gnostic Trouble Code
(DTC
) table
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.01.3

01-38

DTC
DTC text
Corrective action
SAE
VAG


P1337 17745 Bank 1, Camshaft
Position (CMP) sensor -
G163-
Short circuit to Ground
(GND) - Check Camshaft Position (CMP) sensor Page 28
-45
P1338 17746 Bank 1, Camshaft
Position (CMP) sensor -
G163-
Open circuit/short circuit
to B+
P1340 17748 Camshaft Position
(CMP) / crankshaft
position sensor
incorrect allocation
Repair Manual, 1.8 Liter 4
-Cyl. 5V Turbo Engine Mechanical, Engine Code
(s): AEB, ATW, Repair Group 13; Engine, disassembling and assembling; removing and installing toothed belt
- Unscrew Camshaft Position (CMP) sensor and check whether shutter wheel
is mounted properly at camshaft. (If mounted improperly, locking lug will get
squished when mounting bolt is tightened.)
- Also check engine timing
Pa
ge 25 of 40 Dia
gnostic Trouble Code
(DTC
) table
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.01.3