engine oil AUDI A3 1999 8L / 1.G AEB ATW Engines Lubrication System Components Workshop Manual

AUDI A3 1999 8L / 1.G AEB ATW Engines Lubrication System Components Workshop Manual A3 1999 8L / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/953/w960_953-0.png AUDI A3 1999 8L / 1.G AEB ATW Engines Lubrication System Components Workshop Manual

Page 1 of 33

AUDI A3 1999 8L / 1.G AEB ATW Engines Lubrication System Components Workshop Manual 17-1
 
     
Lubrication system 
components, removing and 
installing 
     
WARNING! 
     
Do not re-use any fasteners that are worn or 
deformed in normal use. 
     Some fasteners are designed to

Page 7 of 33

AUDI A3 1999 8L / 1.G AEB ATW Engines Lubrication System Components Workshop Manual 17-4
 
  
19 - 
Bolt 
45 Nm (33 ft lb)
20 - 
Oil drain plug 50 Nm (37 ft lb)
21 - 
Sealing washer Always replace
22 - 
Oil pan Removing and installing   Page 17
-9
Clean contact surface before install

Page 8 of 33

AUDI A3 1999 8L / 1.G AEB ATW Engines Lubrication System Components Workshop Manual 17-5
 
  
CAUTION! 
Part numbers are listed here for reference only. 
Always check with your Parts department for 
the latest information.  24 - 
Gasket 
Always replace
25 - 
Bolt 10 Nm (7 ft lb)
26 -

Page 11 of 33

AUDI A3 1999 8L / 1.G AEB ATW Engines Lubrication System Components Workshop Manual 17-7
 
  
11 - 
Engine oil temperature sensor -G8- 
10 Nm (7 ft lb)
12 - 
Sealing washer If leaking, cut open and replace
13 - 
O-ring Always replaceSnap into grooves on oil cooler
14 - 
Oil cooler Re

Page 13 of 33

AUDI A3 1999 8L / 1.G AEB ATW Engines Lubrication System Components Workshop Manual 17-9
      
Oil pan, removing and installing
 
     
Special tools and equipment  
     
10-222A engine support bridge with 10-222A/1 
bracket for engine 
     2024A engine sling
     3249 puller

Page 22 of 33

AUDI A3 1999 8L / 1.G AEB ATW Engines Lubrication System Components Workshop Manual 17-18
      
Installing  
      Installation is the reverse of removal, noting the 
following:  
     
Note:  
     
Replace gaskets and O-rings.
     When installing oil pan on removed engine, 
note

Page 23 of 33

AUDI A3 1999 8L / 1.G AEB ATW Engines Lubrication System Components Workshop Manual      
   Tightening torque: 45 Nm (33 ft lb)
     
-  Tighten M10 bolts between oil pan and engine 
block. 
     
   Tightening torque: 45 Nm (33 ft lb)
     
-  Tighten all M6 bolts between oil pan a

Page 24 of 33

AUDI A3 1999 8L / 1.G AEB ATW Engines Lubrication System Components Workshop Manual 17-19
      
-  Install subframe   Repair Manual, Suspension, 
Wheels, Steering,Repair Group 40.      
-  Place torque support on rubber buffer for torque 
support and tighten bolts to 25 Nm (18 ft lb

Page 25 of 33

AUDI A3 1999 8L / 1.G AEB ATW Engines Lubrication System Components Workshop Manual 17-20
      
Tightening torques  
     
Component  
  
Tightening 
torques  
Oil pan to engine block   M6   10 Nm (7 ft lb)  
   M10   45 Nm (33 ft lb)  
Oil pan to transmission   45 Nm (33 ft lb)  
E

Page 26 of 33

AUDI A3 1999 8L / 1.G AEB ATW Engines Lubrication System Components Workshop Manual 17-21
      
Oil pump, removing and installing
 
     
Removing  
     
-  Remove oil pan   Page 17
-9 .
     
-  Unhinge baffle plate and remove.
    
Installing  
Installation is the reverse of remo
Page:   1-10 11-20 next >