check engine AUDI A3 2000 8L / 1.G AEB ATW Engines Cooling System Components Workshop Manual

AUDI A3 2000 8L / 1.G AEB ATW Engines Cooling System Components Workshop Manual A3 2000 8L / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/946/w960_946-0.png AUDI A3 2000 8L / 1.G AEB ATW Engines Cooling System Components Workshop Manual

Page 6 of 34

AUDI A3 2000 8L / 1.G AEB ATW Engines Cooling System Components Workshop Manual 19-6
 
    
Filling  
Note: 
CAUTION!  -  Remove drain plug from coolant pump (arrow).
The cooling system is filled year-round with frost and corrosion 
protection additives. Until 6/96, G 011 A8 C co

Page 11 of 34

AUDI A3 2000 8L / 1.G AEB ATW Engines Cooling System Components Workshop Manual 19-10
      
-  Start engine and maintain an engine speed of 
about 2000 RPM for approx. 3 minutes. 
     
-  Allow engine to idle until the lower radiator hose 
is hot.Check coolant level and top up

Page 19 of 34

AUDI A3 2000 8L / 1.G AEB ATW Engines Cooling System Components Workshop Manual 19-17
      
Note:  
     When installing ribbed belt, check for correct 
seating on belt pulley. 
     
- Install V-belt   Page 13
-18
 .
     
-  Fill up with coolant   Page 19
-6 .
     
WARNING!

Page 24 of 34

AUDI A3 2000 8L / 1.G AEB ATW Engines Cooling System Components Workshop Manual 19-20
      
Coolant thermostat, removing, installing 
and checking
 
     
Removing  
     
- Drain coolant   Page 19
-4 .
    
Installing  
WARNING! 
The cooling system is pressurized when the engin