display AUDI A3 2000 8L / 1.G ATW Engine Ignition System Workshop Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 2000, Model line: A3, Model: AUDI A3 2000 8L / 1.GPages: 59, PDF Size: 0.53 MB
Page 23 of 59
28-22
Component location Overview of component
locations Page 24
-5
Test sequence
- Connect VAS5051 tester or VAG1551 scan tool
and select control module for engine electronics
using "address word" 01 Page 01
-10
. Engine
must run at idle.
Rapid data transfer
HELP
Select function XX
When indicated on display
- Press buttons -0- and -8- to select "Read Measuring Value Block" and
press -Q- button to confirm input.
Read measurin
g value block
Q
Enter display group number XXX
When indicated on display
- Press buttons -0-, -0- and -4- to select "display group number 004" and
press -Q- button to confirm input.
Read Measuring Value Block 4
1
2
3
4
Indicated on display
- Check specified value for Intake Air Temperature (IAT) sensor in
display field 4:
Pa
ge 23 of 59 I
gnition s
ystem, checkin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.28.1
Page 24 of 59
28-23
Display fields
1 2 3 4
Display group 004: Intake Air Temperature (IAT), engine at idle
Display xxxx/min xx.x volts
xxx.x C
xxx.x C
Indicated Engine speed
(RPM) Battery
voltage Coolant
temperature Intake Air Temperature (IAT)
Functional
range
-48.0 to 143.0 C
Specified value xxxx/min 12.0 to 15.0 V
80.0 to 110.0 C
From ambient temperature up to 110
C
1)
1) If a temperature is indicated which differs greatly from ambient temperature of sensor, check sensor and sensor wires for
contact resistances and open circuit.
Pa
ge 24 of 59 I
gnition s
ystem, checkin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.28.1
Page 32 of 59
28-31
Component location Overview of component
locations Page 24
-5
Test requirement:
Engine cold
Test sequence
- Connect VAS5051 tester or VAG1551 scan tool
and select control module for engine electronics
using "address word" 01 Page 01
-10
. Engine
must run at idle.
Rapid data transfer
HELP
Select function XX
When indicated on display
- Press buttons -0- and -8- to select "Read Measuring Value Block" and
press -Q- button to confirm input.
Read measurin
g value block
Q
Enter displa
y group number XXX
When indicated on display
- Press buttons -0-, -0- and -4- to select "display group number 004" and
press -Q- button to confirm input.
Read Measuring Value Block 4
1
2
3
4
Indicated on display
- Check indication in display field 3.
Pa
ge 32 of 59 I
gnition s
ystem, checkin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.28.1
Page 33 of 59
28-32
Display fields
1 2 3 4
Display group 004: Coolant temperature, engine at idle
Display xxxx/min xx.x volts
xxx.x C
xxx.x C
Indicated Engine speed
(RPM) Battery
voltage Coolant temperature Intake Air Temperature (IAT)
Functional
range
-48.0 to 143.0 C
Specified value xxxx/min 12.0 to 15.0
V Temperature value must rise
evenly From ambient temperature up to
110 C
If display field 3 does not have a realistic
indication:
- Disconnect connector at coolant temperature
sensor.
Coolant temperature sensor with square
connector:
- Connect multimeter between terminal 1 and 3 of sensor for resistance
measurement.
Pa
ge 33 of 59 I
gnition s
ystem, checkin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.28.1
Page 55 of 59
28-51
Misfire recognition, checking
Special tools and equipment
Test sequence
VAS5051 with VAG5051/1
orVAG1551 with VAG1551/3A
- Connect VAS5051 tester or VAG1551 scan tool and select control
module for engine electronics using "address word" 01 Page 01
-10
.
Engine must run at idle.
Rapid data transfer
HELP
Select function XX
When indicated on display
- Press buttons -0- and -8- to select "Read Measuring Value Block" and
press -Q- button to confirm input.
Read measurin
g value block
Q
Enter displa
y group number XXX
When indicated on display
- Press buttons -0-, -1- and -4- to select "display group number 014" and
press -Q- button to confirm input.
Read Measuring Value Block 14
1
2
3
4
When indicated on display
- Check misfire recognition.
Pa
ge 55 of 59 I
gnition s
ystem, checkin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.28.1
Page 56 of 59
28-52
Display fields
1 2 3 4
Display group 014: Misfire recognition
Display xxx /min xxx %
xxx
---
Indicated Engine
speed
(RPM) Load
Number of ignition misfires
Misfire recognition
Functional
range
activated
locked
Specified
value xxxx/min 15 to
33 % 0
activated
Note
If the specified value is exceeded:
Check combustion misfires of
individual cylinders Page 28
-53
If ignition misfires are to be expected due to
operation conditions (e.g. warm-up,
deceleration shut-down), misfire recognition
is deactivated
If specified value is obtained:
-
Press button.Rapid data transfer
HELP
Select function XX
Indicated on display (function selection):
If specified value is not obtained:
- Press -C- button.
Pa
ge 56 of 59 I
gnition s
ystem, checkin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.28.1
Page 57 of 59
28-53
Check misfire recognition of the individual
cylinders. Read measuring value block
Q
Enter display group number XXX
When indicated on display
- Press buttons -0-, -1- and -5- to select "display group number 015"
and press -Q- button to confirm input.
Read Measuring Value Block 15
1
2
3
4
When indicated on display
- Check misfire recognition in display fields 1 to 4.
Display fields
1 2 3 4
Display group 015: Misfire recognition of cylinders 1, 2 and 3
Display
xxx
xxx
xxx
---
Indicated
Number of combustion
misfires, cylinder 1 Number of combustion
misfires, cylinder 2 Number of combustion
misfires, cylinder 3 Misfire
recognition
Functional
range
activated
locked
Specified
value 0
0
0
activated
Note
If the specified value is exceeded: Evaluation Page 28
-55
--- Pa
ge 57 of 59 I
gnition s
ystem, checkin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.28.1
Page 58 of 59
28-54
- Press -C- button.Read measuring value block
Q
Enter display group number XXX
When indicated on display
- Press buttons -0-, -1- and -6- to select "display group number 016" and
press -Q- button to confirm input.
Read Measuring Value Block 16
1
2
3
4
When indicated on display
- Check misfire recognition in display fields 1 and 4:
Display fields
1 2 3 4
Display group 016: Misfire recognition of cylinder 4
Display
xxx
---
Indicated
Number of combustion misfires, cylinder 4
Misfire recognition
Functional range
activated
locked
Specified value
0
activated
Note
If the specified value is exceeded: Evaluation Page 28
-55
---
Pa
ge 58 of 59 I
gnition s
ystem, checkin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.28.1
Page 59 of 59
28-55
Evaluation display group 014, display field 3 and display group 015 and 016, display fields 1, 2 and 3. Display field:
3
Possible cause
Corrective action
Larger than 0
spark plug faulty
spark plug connector faulty
Ignition coil or power output stage
faulty - Check spark plugs and ignition wires with connector
- Ignition coils with power output stages. Checking Page
28
-4
Fuel injector faulty- Check fuel injectors Page 24
-38
Pa
ge 59 of 59 I
gnition s
ystem, checkin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.28.1