Inside AUDI A3 2007 8P / 2.G RNS_E Navigation System Manual

About this book 4About this bookEquipment and illustrationsTh i s b o o k d e s c r i b e s t h e equipment range specified for this model at
the editorial deadline date as indicated on the inside of the back
c o v e r. I n d iv i d u a l i t e m s o f e qui p m e n t ma y n o t y e t b e a v a i l a b l e a t t h e
time of printing or may only be offered in certain countries.
Th e illustrations are designed as schematic images. Some of the
details on your vehicle may therefore look slightly different than
illustrated in this manual.Structure of the bookThe contents are systematically structured in a color-coded layout
to make it easier to locate specific topics and understand them.Chapters, Table of Contents and IndexThe contents of the book are divided into relatively small sections
that are summarized in clearly arranged chapters (e.g. “System
Operation”). To make it easier to use the book, we have identified
the individual chapters with the color codes from the Audi Naviga-
tion System. Each color code is shown in the bottom margin of the
chapter as well as in the headings and illustrations.
In front of each chapter, icons shaded with the background color
code of that specific section help to make the book more attractive
and also serve to differentiate the fonts and facilitate navigation.
Th e Table of Contents, organized into chapters, and the detailed
Index a t t h e e n d o f t h e b o o k h e l p y o u to qu ick ly fin d t h e i n fo rm a t i o n
you need.SectionsThe information in most sections apply to all vehicles. However,
since the equipment level is not the same on all vehicles, this book
also contains sections which may not apply to your particular
vehicle. When this is the case, the section will be identified, for example: “Applies to vehicles: with Audi cd changer”. This way, you
only have to read the sections which are applicable to your vehicle.
Although the information has been grouped into the appropriate
sections, there are many possible equipment combinations which
may be described in this book, but not installed on your vehicle.
Th e s e a re li s t e d as o p t io n a l e qu i p m e n t a n d m a r ke d w it h a n as t e r i s k
“*”.
®Registered trademarks are marked with ®. The absence of this
symbol does not warrant unrestricted use of a term.


The paragraph continues on the next page.

The square marks the end of a paragraph.
Heading summaries and step-by-step
instructionsEach section has its own heading.
Then follows a summary (in large, italic print), which tells you the
subject matter of the section.
Under an illustration you will find step-by-step instructions (in rela-
t i v e l y l a rg e p r i n t ), w h ich t e l l y o u w h a t y o u m us t d o . E a ch i n s t r uc t i o n
is identified with a dash.
A descriptive section offering important and continuing informa-
tion for each topic follows.Special symbols in this bookSeveral symbols are used in this book. These symbols draw your
attention to important information about a number of special
subjects. Please familiarize yourself with the symbols and what they
mean.

Drives43
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
CD changerApplies to vehicles: with Audi cd changerLoading your CDs into the CD changerLoading just one CD
– Press the button . As soon as the CD changer
is ready for you to load a CD, the red LEDs on the inside
sides of the CD tray (not shown in the illustration)
start to blink.
– Insert the CD (printed side up and straight) into the CD
tray . The CD automatically loads into the next free slot
in the CD changer. The LED in the button will stop
blinking.Loading all CDs
– Press and hold the button for longer than 2
seconds.
– Wait until the red LEDs on the inside sides of the CD tray
(not shown in the illustration) start to blink.
– Now insert your other CDs (printed side up and straight)
o n e a t a t i m e i n t o t h e C D t r a y . Th e L E D s i n e a ch b u t t o n
will stop blinking once a CD has been loaded into the
slot.
Loading the CD into a specific empty slot
– Press the button . The LED in the button of
any empty slot will start to blink.
– If you want to load a CD into a specific slot, you can also
p r e s s a b u t t o n , w h e r e t h e L E D i s not lit a n d i n s e r t y o u r
CD.
– Wait until the red LEDs on the inside sides of the CD tray
(not shown in the illustration) start to blink.
– Now insert your CDs (printed side up and straight) into
the CD tray .
Loading the CD into a specific slot
– Press the button . The LEDs in the buttons
for the slots that already have CDs loaded blink.
– If you press an illuminated button that is not blinking
then that CD will be ejected.
– Remove the ejected CD from the CD tray .
Fig. 42 Audi cd
changer: Loading CDs
LOA D
A2
A;
A;
A3
LOA D
A2
A1
A;
A3
LOA D
A2
A
A3
A1
A;LOA D
A2
A A3
A1

Drives 44
– Insert a CD that you want to load, label up, into the CD
tray .If you press the button again while you are loading all CDs,
the loading process will be interrupted.
Make sure you load your CDs label side up and straight page 43, fig.42.
The CDs should never be forced into the slot. The CD will be pulled
into the CD changer automatically.
Aft e r a C D h as b e e n l o a d e d in to t h e CD ch a n g e r, yo u s h o u ld w a i t fo r
a moment until the red L ED on the inside side o f the tray blinks. The
CD tray is then ready to be loaded with the next CD.
If you choose a slot which already has a CD loaded in it, the CD will
be ejected. Remove the CD, and insert the new CD you want to have
in this slot.
I f yo u w a i t l o n g e r t h a n 3 0 s e c o n d s w i th o u t r e mo v in g t h e CD, th e C D
will be pulled back into the CD changer automatically.Tips


The CD is played through the main CD/SD function
page 78.


If you have accidently ins er ted a CD upside down (with the label
side facing down), the Display will show a read-error-message.


Never force the CDs into the CD tray. The CD will be pulled into
the CD changer automatically.


Do not use any non circular CDs (for example, Shape CDs)
page 49.
Applies to vehicles: with Audi cd changerEjecting CDsEjecting a CD
– Press the CD EJECT button
fig.43.
– Press the button (LED on) to eject an individual CD, or
– Press the CD EJECT button again to eject the CD you
are playing.
Ejecting all CDs
– Hold down the button for more than two seconds. All
CDs that are currently in the CD changer will be ejected.
Note

Always keep your CDs in their original cases to protect them
from dirt, dust, scratches or other damage.
A1
LOAD
A1
Fig. 43 Audi cd
changer: Ejecting CDs
A1A2A2
A1

Drives 50 Do not place an adhesive label on a CD.
Do not place an adhesive label on your CDs. Due to heat build-up
inside the CD player, the label could come loose and jam up the CD
player or CD changer.
Do not use protective rings.
Do not use commerically available protective rings. They could jam
up the player.
Cleaning your CDs
Use a soft, lint-free cloth to clean your CDs. Wipe the disc starting
f r o m t h e c e n t e r a n d w o r k i n g y o u r w a y o u t . Yo u c a n p u r c h as e s p e c i a l
cleaners to remove stubborn stains from your CD.
Never use CD cleaners which contain benzine or other corrosive
properties. They could damage your CD!Note


Never place an adhesive label on your CDs.


To prevent the CD player from malfunctioning, never use CD
protectors or stabilizers (available in most stores).


Never insert an out-of-round CD (shape CDs) in the CD slot.


Never leave your CDs exposed to direct sunlight.


The use of cleaning CDs can lead to mechanical damage to the
drive.
Tips on handling navigation DVDsTo ensure p erfect, high-quality navigatio n DVD playb ack, only clean
navigation DVDs should be used. In addition, observe the following:Do not use a damaged navigation DVD
You should not use a scratched or damaged navigation DVD. To
avoid damage, never expose the navigation DVD to direct sunlight.
Always keep the navigation DVD in a suitable jewel case (e.g. CD
case).
Do not attach labels
Do not attach labels to the navigation DVD. Attaching labels can
cause an imbalance. If the labels are exposed to heat, they can
become detached and cause damage to the navigation DVD drive.
Do not use protective rings
Co mm e r c i a ll y a v a i l a b l e p ro t e c t i v e r i n g s m u s t n o t b e us e d . Th e y c a n
jam in the navigation DVD drive and damage the drive mechanism.
Cleaning the navigation DVD
Use only a soft, lint-free cloth to clean the navigation DVD. Wipe the
DVD in a straight line from the center outwards. Heavy soiling can
be removed with a commercial CD cleaner or isopropyl alcohol.
Please never use fluids such as gasoline, paint thinner or vinyl
record cleaner or the surface of the DVD could be damaged!
Note


Never place an adhesive label on your Navigation DVD.


To a v o id d a ma g e to t h e DV D d ri v e , n e v e r us e a CD p ro t e c t i v e fi l m
or stabilizer (available in stores as a CD accessory).


Always keep the navigation DVD in a suitable jewel case (e.g. CD
case) to protect it from dirt, dust particles, scratches and other
damage.


Never expose the navigation DVD to direct sunlight.


The use of cleaning CDs can lead to mechanical damage to the
drive.
ACA

Navigation (NAV)145
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP After you have activated the side menu, you are shown information
(city/street names and longitude/latitude) for the position you had
reached at the time of activation.
The following functions can be carried out using the
active map side menu:
Tips
Settings made in an active side menu are not kept after deactiva-
tion. You can enter permanent settings for the map display using
Setup Navigation
page 151.
Map orientation
Inside side menu activation you can switch back and
forth between direction of travel and North.Fig. 153 Navigation: Map orientation North in the active side menu–Press the Map control button in the navigation menu.
– Press the control knob to switch to the side menu.
– Rotate the control knob to the first map menu item

fig.153.
– By pressing the control knob, you can switch back and
forth between orientation North
fig.153 and Tr a v e l.
For the time the side menu is active, the changed setting
remains.
Legende
FunctionOrientation page 145Scale page 146Map position menu page 148Activation of map crosshairs page 149Presentation of map crosshairs page 149Vehicle symbol
A1AA AA4A9
A1