recommended oil AUDI A3 CABRIOLET 2016 Owners Manual

Check ing and F illing
Audi oil quality standard
Gas olin e
VW 502 00 or
engi ne vw 50400
A udi reco mmend s
~Castrol I jgl[J,'fE{g ?r,w.:..~J ri, '.IA!,
Audi rec ommends Longlif e high perform ance
engi ne oil from Au di Genuin e Parts
Using the proper engine oil is important for the
functionality and service life of the engine. Your
engine was factory-filled with a h igh-quality oil
which can usually be used throughout the entire
yea r.
(D Note
Your Limited New Vehicle Warranty does not
cover damage or malfunctions due to failure
to follow recommended maintenance and use
requirements as set forth in the Audi Owner's
Manual and Warranty & Maintenance booklet .
- Use only a high qual ity eng ine oil that ex-
pressly complies with the Audi oil quality
standard specified for your vehicle's engine .
Using any other oil can cause serious engine
damage.
- Do not mix any lubricants or other additives into the engine oil. Doing so can cause en­
gine damage.
@ Tips
If you need to add oil and there is none availa ­
ble that meets the Audi oil quality standard
your engine requires, you may add a total of
no more than 0.5 quart/liter of a h igh-quality
"synthet ic"oil that meets the following speci­
fications.
- Vehicles w ith gasoline eng ine: ACEA A3 or
API SM with a viscosity grade of SAE OW-30,
SAE 5W-30 or SAE 5W-40.
- For more information about engine o il that
has been approved for your vehicle, please
contact either your authorized Audi dea ler
or Aud i Custome r Relat ions at
1 (800) 822- 2834 or visit ou r web site at
www.audiusa.com or www .aud icanada.ca.
192
· Eng ine oil consumption
The engine in your vehicle depends on an ade­
quate amount of oil to lubricate and cool all of
its moving parts.
In order to provide effect ive lubricat ion and cool­
i ng of internal engine components, all internal
combust ion eng ines consume a certa in amount
of oil. Oil consumption var ies from engine to en­
gine and may change sign ificantly over the life of
the engine . T ypically, engines w ith a specified
break -in period (see¢
page 65) consume more
oi l during the break-in period than they consume
after oil consumption has stabilized.
U nder normal cond itions, the rate of oil con­
sumption depends on the quality and viscosity o f
the oil , the RPM (revo lutions per minute) at
which the engine is operated, the ambient tem­ perature and road conditions. Further factors are
the amount of o il dilution from water condensa­
tion or fuel residue and the oxidation level of the
o il. As any engine is subject to wear as mileage
builds up, the o il consumption may increase over
ti me unt il replacement of wo rn compo nents may
become necessary.
With all these variables coming into play, no standard rate of o il consumption can be estab­
li shed or spec ified . T he re is no alte rnative to reg­
u la r and freq uent checki ng of the oi l level, see
Note.
If the yellow engine oil level warning symbo l II
in the instrument cluster lights up, you sho uld
chec k the o il level as soon as possible
¢
page 193. Top off the o il at your earlies t con­
venience
¢ page 193.
A WARNING
Before you check anything in the engine com­
partment, always read and heed all WARN­
INGS
¢page 188.
(D Note
Driving with an insufficient oil level is likely to
cause severe damage to the engine.
IJII,

<( co ..... N
" N ..... 0 r--. > 00
-Always dispose of used engine oil prope rly .
Do not dump it on garden soi l, wooded
areas, into open streams or down sewage
drains.
- Recycle used engine oil by taking it to a used
engine oil collection facility in your area, or
contact a serv ice stat ion.
Cooling system
Coolant
The engine coo ling system is filled wi th a mixture
of purified water and coolant additive at the fac ­
tory. This coo lant must not be not changed.
The coolant leve l is moni to red throug h the . in ­
d icator light
q page 16 . Howeve r, we do recom­
mend occasiona lly checking the coo lant level
manually.
If you m ust add coo lant, use a m ix ture of water
an d coolant addit ive. Mixing the coolant additive
with d isti lled water is recommended.
Coolant additive
The coolan t additive is made of anti-freezing and
corros ion pro tection agents. Only use the fol low­
in g coolant add it ives. The se addi tives may be
mixed wit h each other.
Coolant additive Specification
G13 TL 7
74)
G12 ++ TL 774 G
T he amount of coo lant additive that needs to be
mixed with water depends on the climate where
the vehicle will be ope rated. If the coolant addi­
tive percentage is too low, the coolant can freeze
and damage the eng ine.
Coolant Freeze protec-
additive tion
Warm reg ions min . 40% m in. -13 °F
max. 45% (-
25
°()
Cold regions min . 50% max . -40 °F
max. 55% (-40
°()
Checking and Filling
(D Note
-
Before the start of w inte r, have you r auth or­
ized Aud i dealer or a uthorized Aud i Serv ice
Facility check if the coolant addit ive in your
vehicle matches the pe rcentage appropriate
for the climate. This is especially important
when driving in colder climates .
- If the appropr iate coo lant add itive is not
availab le in an emergency, do not add any
other additive. Yo u could damage the en­
gine. If this happens, on ly use water and re­
store t he corre ct m ix tu re ratio with the
specified coolant ad ditive as soon as poss i­
ble.
- O nly refill w ith new coolant.
- Radiator sea lant must not be mi xed with
the coolant.
Adding coolant
Fig . 1 64 En g in e compa rtment: ma rki ngs o n the coolant
expans ion
t ank
Read and follow the WARNINGS befo re check­
ing anything in the engine compartment
i=> page 188, Working in the engine compart­
ment.
Che cking the engine coolant level
.. Park your vehicle on a leve l su rface .
.. Switch t he ignition off .
.. Read the coolant level on the coolant expansion
tank ¢
fig. 164. The coolant level must be be­
tween the markings when the eng ine in cold .
When the eng ine is warm it can be slig htly
above the upper marking.
195